This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard Sort ascending | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 147.2201(a)(3)(i) | TXUIC regulations | 1981 | Amendment to 16 TAC section 3.9 (section .051.02.02.009) issued December 21, 1981, effective April 1, 1982 | State of Texas | |
Environmental Protection Agency | 40 CFR 147.2201(a)(3)(iii) | TXUIC regulations | 1981 | Amendment to 16 TAC section 3.71 (section .051.02.02.074) issued December 21, 1981, effective April 1, 1982 | State of Texas | |
Environmental Protection Agency | 40 CFR 147.2201(a)(3)(ii) | TXUIC regulations | 1981 | Amendment to 16 TAC section 3.46 (section .051.02.02.046) issued December 21, 1981, effective April 1, 1982 | State of Texas | |
Transportation Department | 87 FR 57379 | 14 CFR 71 | FAA Order JO 7400.11G : jet route J-52 | 2022 | Amendment and Revocation of Air Traffic Service (ATS) Routes; Eastern United States | Federal Aviation Administration, U.S. Department of Transportation |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 1584b | 2011 | Amendment 2: Changes to Clause 4 of IEEE Std 1584-2002, IEEE Guide for Performing Arc-Flash Hazard Calculations | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 111.25-5(a) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Research and Special Programs Administration | 46 CFR 111.70-1(a) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Coast Guard | 46 CFR 110.10-1(g)(18) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.12-7(b) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 1584a | 2004 | Amendment 1 to IEEE Std 1584-2002 Guide for Performing Arc-Flash Hazard Calculations | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(21) | IEC 92-304 | 1995 | Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.33-5(b) | IEC 92-304 | 1995 | Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.33-3(a)(2) | IEC 92-304 | 1995 | Amendment 1 Electrical Installation in Ships, Part 304: Equipment-Semiconductor Convertors | International Electrotechnical Commission | |
Coast Guard | 46 CFR 110.10-1(g)(17) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.12-7(b) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.50-3(g)(2) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.50-3(c) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.53-1(a)(1) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.50-3(e) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.54-1(a)(1) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (3) | AOAC Method 993.14 | 1998 | Aluminum-Total, mg/L | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(9) | ASTM B210 | 1968 | Aluminum-Alloy Drawn Seamless Tubes | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.46(b)(4) Table 1, Note 1 | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Research and Special Programs Administration | 49 CFR 178.65(b)(2) | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Research and Special Programs Administration | 49 CFR 172.102(c)(3) B13c | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/AAMA 1402 | 1986 | Aluminum Siding, Soffit, and Fascia | American Architectural Manufacturers Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | AA ASM 35 | 1980 | Aluminum Sheet Metal Work in Building Construction | Aluminum Association | |
Energy Department | 10 CFR 440 Appendix A | AAMA 101 | 1988 | Aluminum Frame Windows | American Architectural Manufacturers Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (3) | USGS I-3051-85 | 1985 | Aluminum by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (3) | APHA Method 3500-Al B | 2001 | Aluminum by Eriochrome Cyanine R Method | American Public Health Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.46(b)(4) Table 1, Note 2 | ASTM B221 | 1976 | Aluminum Alloy Extruded Bars, Rods, Shapes, and Tubes | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xxii) | APHA Method 3500-Al | 2001 | Aluminum | American Public Health Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(D)(1) | ASME Code Case N-729-1 | 2006 | Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure-Retaining Partial-Penetration Welds, Section XI, Division 1 | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(D)(3) | ASME Code Case N-729-1 | 2006 | Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure-Retaining Partial-Penetration Welds, Section XI, Division 1 | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(D)(5) | ASME Code Case N-729-1 | 2006 | Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure-Retaining Partial-Penetration Welds, Section XI, Division 1 | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(D)(6) | ASME Code Case N-729-1 | 2006 | Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure-Retaining Partial-Penetration Welds, Section XI, Division 1 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 125.180(b) | ABYC E-8 | 1994 | Alternating-Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 129.120(a)(2) | ABYC E-8 | 1994 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 28.345(a) | ABYC E-8 | 1985 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 183.340(b)(4) | ABYC E-8 | 2001 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 28.40(b) | ABYC E-8 | 1985 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC E-8 | 2001 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 183.130(a)(2)(i) | ABYC E-8 | 2001 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.005-4(d) | Drawing No. 160.005-1 (Sheet 2) | 2012 | Alternate Stitching of Tapes and Webbing (Adult and Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.005-4(e) | Drawing No. 160.005-1 (Sheet 2) | 2012 | Alternate Stitching of Tapes and Webbing (Adult and Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.002-1(b) | DWG No. F-49-6-1 (Sheet 1A) | 2012 | Alternate Stitching of Tapes and Webbing (Adult and Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.005-1(b) | Drawing No. 160.005-1 (Sheet 2) | 2012 | Alternate Stitching of Tapes and Webbing (Adult and Child) | U.S. Coast Guard | |
Environmental Protection Agency | 88 FR 59662 | 40 CFR 761 | SW-846 | 2023 | Alternate PCB Extraction Methods and Amendments to PCB Cleanup and Disposal Regulations | U.S. Environmental Protection Agency |
Environmental Protection Agency | 88 FR 59662 | 40 CFR 761 | ASTM D5373-16 | 2021 | Alternate PCB Extraction Methods and Amendments to PCB Cleanup and Disposal Regulations | ASTM International |