This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 8.110(b) | ABS Publication | 1997 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 111.54-1(b) | IEC 60947-2 | 2003 | Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.170-5(b)(4) | ASTM A 314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International | |
Coast Guard | 46 CFR 116.423(a)(4) | ASTM E 662 | 1997 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials | ASTM International | |
Coast Guard | 46 CFR 111.107-1(c)(1) | IEEE 1202 | 1991 | Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 97.15-55(a) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 162.060-26(d) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IA | APHA Method 9221 C | 2006 | Estimation of Bacterial Density | American Public Health Association | |
Coast Guard | 33 CFR 96.130(b) | IMO Resolution A.788(19) | 1995 | Guidelines on Implementation of the International Safety Management (ISM) Code by Administrations | International Maritime Organization | |
Coast Guard | 27 CFR 21.64(a) | The United States Pharmacopoeia | 1980 | Formula No. 37 | U.S. Pharmacopeial Convention | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM B 85 | 1996 | Standard Specification for Aluminum-Alloy Die Castings | ASTM International | |
Coast Guard | 40 CFR 444.12(b)(1) Table (11) | USGS I-3900-85 | 1985 | Zinc by Flame Atomic Absorption | U.S. Geological Survey | |
Coast Guard | 46 CFR 164.120-5(d)(4) | ISO 527-1:1993(E) | 1993 | Plastics—Determination of tensile properties, Part 1: General Principles, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 56.01-2(d)(11) | ASME B16.14 | 1991 | Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 164.46(a)(3)(iii), Note to 164.46(a) | IMO SN/Circ. 227 | 2003 | Guidelines for the Installation of a Shipborne Automatic Identification System (AIS) | International Maritime Organization | |
Coast Guard | 21 CFR 101.9(c)(7)(ii) | FAO/WHO Publication | 1990 | Protein Quality Evaluation Report | Food and Agricultural Organization of the United Nations | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(5)(i) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 54.30-10(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 182.500(b) | ISO 8846 | 1990 | Small Craft-Electrical Devices-Protection Against Ignition of 1990 DHS/USCG | International Organization for Standardization | |
Coast Guard | 46 CFR 56.30-5(c)(1) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 60.335(b)(10)(ii) | ASTM D 3246 | 1992 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Coast Guard | 46 CFR 52.05-45(b) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 13 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.049-1(b) | Drawing No. 160.049-1 | 2012 | Buoyant Cushion, Plastic Foam | U.S. Coast Guard | |
Coast Guard | 46 CFR 184.200 | NFPA 306 | 1993 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-6 | 2001 | Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 160.043-1(a)(1) | FedSpec QQ-M-151 | 1936 | Metals; General Specification for Inspection of | Federal Specifications Standards and Test Methods | |
Coast Guard | 40 CFR 136.3(a) Table IA (7) | ASTM D 6503 | 1999 | Standard Test Method for Enterococci in Water Using Enterolert | ASTM International | |
Coast Guard | 33 CFR 154, Appendix B, 8.6 | ASME B&PV Code | 2005 | Section VIII, Division 1, Pressure Vessels | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 169.115(c)(3) | NFPA 306 | 1980 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
Coast Guard | 46 CFR 113.30-25(i) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
Coast Guard | 33 CFR 142.30(a) | ANSI Z89.1 | 1981 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 33 CFR 127.1203(b) | 29 CFR 1910.1000, Z Tables | 2014 | Permissible Exposure Limits | Occupational Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 46 CFR 120.380(m) | UL 489 | 1995 | Molded-Case Circuit Breakers and Circuit Breaker Enclosures | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 147.1900(a)(2) | ORUIC regulations | 2014 | Oregon Administrative Rules, 340-44-005 through 340-44-055 (October 1983); 340-45-005 through 340-45-075 (January 1990); 632-10-002 through 632-10-235 (May 1986); 632-20-005 through 632-20-180 | State of Oregon | |
Coast Guard | 46 CFR 111.105-9 | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 46 CFR 125.180(b) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 56.01-2(k)(4) | MSS SP-44 | 2001 | Steel Pipe Line Flanges | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 118.410(g)(2) | UL 1058 | 1989 | Halogenated Extinquishing System Units as amended through April 19, 1994 | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 148.450(d) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 24 CFR 3280.808(m) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 59.01-5(e) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section VII, Recommended Guidelines for the Care of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 78.45-1(a)(2) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
Coast Guard | 46 CFR 160.005-4(e) | Drawing No. 160.005-1 (Sheet 4) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 181.425(b) | NFPA 17 | 1985 | Standard for Dry Chemical Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 334/A 334M | 1996 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 160.076-31(c)(5) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. |