This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.174-17(f) | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Coast Guard | 33 CFR 126.15(a)(4) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 175.600(b) Table | UL 1571 | 1995 | Incandescent Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 54.30-5(a)(4) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.176-4(b) | FAA TSO-C13D | 1983 | Federal Aviation Administration Standard for Life Preservers | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 40 CFR 444.12(b)(1) Table (1) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 46 CFR 52.01-1(b)(1) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.28 | 1994 | Wrought Steel Buttwelding Short Radius Elbows and Returns | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 444.12(b)(1) Table (4) | ASTM D 1688A | 1990 | Standard Test Methods for Copper in Water, Atomic Absorption, Direct | ASTM International | |
Coast Guard | 24 CFR 3280.801(a) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 63.25-9(a) | ISO 13617 | 2001 | Shipbuilding-Shipboard Incinerators—Requirements, Second Edition | International Organization for Standardization | |
Coast Guard | 33 CFR 183.5(b) | SAE J-378 | 1984 | Marine Engine Wiring | Society of Automotive Engineers | |
Coast Guard | 46 CFR 199.70(d) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 111.01-9(d) | IEC 60529 | 1989 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 54.15-13(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 131.110(d)(1) | AOAC Official Methods | 1989 | Official Methods of Analysis | AOAC International | |
Coast Guard | 21 CFR 145.3(m) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 40 CFR 60.111a(b) Petroleum liquids | ASTM D 2880 | 1996 | Standard Specification for Gas Turbine Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 116.422(b)(2) | UL 723 | 1994 | Surface Burning Characteristics of Building Materials | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 110.10-1(g)(9) | IEC 60079-5 | 1997 | Electrical Apparatus for Explosive Gas Atmospheres—Part 5: Powder Filling “q”, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 13.207 | IMO Resolution A.437 (XI) | 1979 | Training of Crews in Fire Fighting | International Maritime Organization | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(12)(i) | EPA-600-4-79-020 | 1983 | Method 270.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 142.39(b)(1) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | UL 489 | 1995 | Molded-Case Circuit Breakers and Circuit Breaker Enclosures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 134.140(a)(3) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Coast Guard | 46 CFR 111.60-5(a)(1) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(3)(iii) | EPA-600-4-79-020 | 1983 | Method 375.3--Gravimetric | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.002-4(c)(1) | DWG No. F-49-6-5 (Sheet 2) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 111.54-1(c)(2) | IEC 60947-2 | 2003 | Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers, Third Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 170.245(b)(2) | MIL-P-21929B | 1991 | Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 Pounds per Cubic Foot | U.S. Department of Defense | |
Coast Guard | 46 CFR 31.40-15 | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 160.052-5(c) | Drawing No. 160.052-1, Sheet 4 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Insert Patterns | U.S. Coast Guard | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC E-8 | 2001 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 154.610(c) | ASTM A 20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 160.062-3(a) | Federal Standard 151 | 1967 | Metals, Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 182.430(k) | ABYC P-1 | 1993 | Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.040-5(c)(2) | MIL-R-23139 | 1965 | Rocket Motors, Surface Launched, Development and Qualification | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.01-2(b)(1) | ANSI/ASME B1.1 | 1982 | Unified Inch Screw Threads (UN and UNR Thread Form) | American National Standards Institute | |
Coast Guard | 40 CFR 1065.705 Table 1 | ISO 8217 | 2005 | Petroleum products--Fuels (class F)--Specifications of marine fuels | International Organization for Standardization | |
Coast Guard | 46 CFR 108.649(g) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 160.115-5(b)(5) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
Coast Guard | 46 CFR 95.01-2(b)(1) | ASTM F 1121 | 2010 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (32) | ASTM D 3559B | 2008 | Standard Test Methods for Lead in Water, Atomic Absorption, Chelation-Extraction | ASTM International | |
Coast Guard | 46 CFR 160.135-5(b)(9) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Coast Guard | 46 CFR 160.151-21(f) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 33 CFR 154, Appendix C, 6.3.1 | ASTM F 631 | 1993 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments | ASTM International | |
Coast Guard | 46 CFR 52.05-15(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.135-5(b)(10) | ASTM D 2584 | 2008 | Standard Test Method of Ignition Loss for Cured Reinforced Resins | ASTM International | |
Coast Guard | 46 CFR 160.151-21(g) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 33 CFR 155, Appendix B, 6.3.1 | ASTM F 631 | 1993 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments | ASTM International |