This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 33 CFR 120.220(b) | MSC Circular 443 | 1986 | Measures to Prevent Unlawful Acts Against Passengers and Crews Aboard Ships | International Maritime Organization | |
Coast Guard | 46 CFR 180.10 | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 56.25-7 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC A-3 | 1993 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Coast Guard | 81 FR 48295 | 46 CFR 169.563(c) | Federal Specification ZZ-H-451 | 1998 | Hose, Fire, Woven-Jacketed Rubber or Cambric-Lined, with Couplings, F | Defense Logistics Agency |
Coast Guard | 46 CFR 52.01-140(b)(3) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 2 | ASME SA-675 | 1998 | Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties 1998 DHS/USCG | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 154.735(s) | OCIMF Publication | 1996 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 80.20(a) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 25.45-2(b)(5) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.076-29(e)(4)(ii) | UL 1191 | 2008 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 164.74(a)(3)(ii) | CIA 3 | 1980 | Standard Test Methods for Fiber Rope Including Standard Terminations | Cordage Institute | |
Coast Guard | 46 CFR 125.180(b) | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Coast Guard | 30 CFR 250.901(d)(3) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Coast Guard | 46 CFR 148.5(a) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 21 CFR 184.1139(b) | Food Chemicals Codex | 1981 | Ammonium Hydroxide | National Academy Press | |
Coast Guard | 33 CFR 140.7(b) | ANSI Z87.1 | 1979 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.005-3(g) | Drawing No. 160.005-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 56.01-2(e)(20) | ASTM A 249/A 249M | 1996 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 111 | 1995 | Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock | ASTM International | |
Coast Guard | 33 CFR 183.5(b) | UL 1114 | 1987 | Marine (USCG Type A) Flexible Fuel Line Hose | Underwriters Laboratories, Inc. | |
Coast Guard | 21 CFR 178.3910(a)(4)(i)(B) | ASTM D 381 | 1980 | Standard Method of Test for Existent Gum in Fuels by Jet Evaporation | ASTM International | |
Coast Guard | 46 CFR 160.055-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5650 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 111.81-1(d) | UL 514B | 1997 | Conduit, Tubing, and Cable Fittings, Fourth Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(F)(8) | EPA Method 506 | 1990 | Determination of Phthalate and Adipate Esters in Drinking Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Gas Chromatography with Photoionization Detection1990 HHS/FDA | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 131.206(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 33 CFR 101.115(b) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-1 or SOLAS Chapter XI-2 | International Maritime Organization | |
Coast Guard | 46 CFR 56.01-2(e)(27) | ASTM A 334/A 334M | 1996 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 160.077-15(e) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.01-2(k)(12) | MSS SP-69 | 1996 | Pipe Hangers and Supports-Selection and Application | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 175.600(b) Table | MIL-P-21929C | 1991 | Plastic Material, Cellular, Polyurethane, Foam-in-Place, Rigid (2 and 4 pounds per cubic foot) | U.S. Department of Defense | |
Coast Guard | 46 CFR 111.25-5(a) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 49 CFR 571.125 S6.1.1(d) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Coast Guard | 46 CFR 160.132-5(c)(2) | IMO LSA Code | 2010 | International Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 183.410(d) | UL 1571 | 1995 | Incandescent Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 21 CFR 101.80(c)(2)(iii)(C) | Monographs in Oral Science | 1983 | Identification of Low Caries Risk Dietary Components | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-72 | 1987 | Ball Valves with Flanged or Butt-Welding Ends for General Service | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 58.03-1(g)(1) | ASTM A 193/A 193M | 1998 | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 160.135-5(e)(2) | ISO 1172:1996(E) | 1996 | Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.151-21(r) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-21(v)(3) | IMO Resolution A.657(16) | 1989 | Instructions for Action in Survival Craft | International Maritime Organization | |
Coast Guard | 46 CFR 111.70-3(a) | NEMA Standards Publication ICS 2.3 | 1995 | Instructions for the Handling, Installation, Operation, and Maintenance of Motor Control Centers | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 160.055-3(j), Table 160.055-3(j) | ASTM D 570 | 1995 | Standard Test Method for Water Absorption in Plastics | ASTM International | |
Coast Guard | 46 CFR 160.151-15(m) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(f)(2) | MIL-P-17549D(SH) | 1981 | Military Specification, Plastic Laminates, Fibrous Glass Reinforced, Marine Structural | U.S. Department of Defense | |
Coast Guard | 46 CFR 169.115(c)(3) | NFPA 70 | 1980 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 58.60-9 | API RP 14C | 1986 | Analysis, Design, Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 56.01-2(e)(70) | ASTM F 1006 | 2008 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications | ASTM International | |
Coast Guard | 46 CFR 160.170-5(c)(5) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
Coast Guard | 46 CFR 154.1802(c)(1) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization |