This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(6) | ASME B16.4 | 1998 | Gray Iron Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(o)(2) | UL 50 | 1995 | Standard for Enclosures for Electrical Equipment | Underwriters Laboratories, Inc. | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(5)(ii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 162.060-26(a) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Coast Guard | 46 CFR 164.120-5(d)(2) | ISO 175:1999(E) | 1999 | Plastics—Methods of test for the determination of the effects of immersion in liquid chemicals, Second Edition | International Organization for Standardization | |
Coast Guard | 21 CFR 172.210(b)(2) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Coast Guard | 33 CFR 164.03(b) | IMO Resolution MSC.74 (69), Annex 3 | 1998 | Recommendation on Performance Standards for an Universal Shipborne Automatic Identification System (AIS) | International Maritime Organization | |
Coast Guard | 46 CFR 39.2009(a)(2)(ix) | IEC 60309-1 | 2012 | Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 1: General Requirements, Edition 4.2 2012-06 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(4)(ii) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 58.03-1(e)(2) | API RP 53 | 1984 | Recommended Practice for Blowout Prevention Equipment for Drilling Wells | American Petroleum Institute | |
Coast Guard | 21 CFR 131.170(f) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 182.440(a)(2)(ii) | UL 1102 | 1992 | Non integral Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 56.30-5(c)(1) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.062-1(a)(2) | Federal Standard 151 | 1967 | Metals, Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 111.60-3(a)(2) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 52.05-30(b) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 12 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 210/A 210M | 1996 | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes | ASTM International | |
Coast Guard | 46 CFR 195.01-3(b) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Coast Guard | 46 CFR 67.119(b) | DOC Publication 55DC | 1987 | Codes for Named Populated Places, Primary County Divisions and Other Locational Entities of the United States and Outlying Areas | U.S. Department of Commerce | |
Coast Guard | 21 CFR 101.9(c)(6) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Coast Guard | 46 CFR 54.01-1(e)(1) | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 98.01-3(b) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section V, Nondestructive Examination | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 47 | 1990 | Standard Specification for Ferritic Malleable Iron Castings | ASTM International | |
Coast Guard | 46 CFR 32.01-1(c)(2) | ASTM F 1273 | 2007 | Standard Specification for Tank Vent Flame Arresters | ASTM International | |
Coast Guard | 46 CFR 160.151-21(f) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.057-1(a)(2) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 56.95-10(c)(1)(ii) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 126.15(a)(2) | NFPA 307 | 1995 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
Coast Guard | 46 CFR 129.550(a) | NFPA 302 | 1989 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 110.15-1(b), Dripproof | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | IMO Resolution A.760(18) | 1983 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 36 CFR 1238.20(b) | ISO 18901 | 2002 | Imaging Materials--Processed Silver-gelatin Type Black-and-White Films--Specifications for Stability | International Organization for Standardization | |
Coast Guard | 46 CFR 118.320(b)(3) | NFPA 1963 | 1993 | Fire Hose Connections | National Fire Protection Association | |
Coast Guard | 46 CFR 148.240(h) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
Coast Guard | 46 CFR 177.405(g)(2) | IMO Resolution A.688(17) | 1991 | Fire Test Procedures for Ignitability of Bedding Components | International Maritime Organization | |
Coast Guard | 38 CFR 17.82(a)(1)(i) | NFPA 101 | 2009 | Life Safety Code | National Fire Protection Association | |
Coast Guard | 46 CFR 63.05-1(f)(2) | ISO 10396 | 2007 | Stationary source emissions—Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems, Second edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.005-4(d) | Drawing No. 160.005-1 (Sheet 2) | 2012 | Alternate Stitching of Tapes and Webbing (Adult and Child) | U.S. Coast Guard | |
Coast Guard | 33 CFR 154.106(h)(1) | OCIMF Publication | 1996 | International Safety Guide for Oil Tankers and Terminals (ISGOTT), Section 6.10, 4th Edition | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 160.061-1(a)(2) | MIL-A-140 | 2015 | Adhesive, Water Resistant, W.P. Barrier Material | U.S. Department of Defense | |
Coast Guard | 46 CFR 121.240(a) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.055-3(h) | Federal Standard 191 | 1978 | Textile Test Method 5660 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.151-5(f)(1) | MIL-C-17415F | 1989 | Cloth, Coated, and Webbing, Inflatable Boat and Miscellaneous Use | U.S. Department of Defense | |
Coast Guard | 46 CFR 119.440(a)(1) Table 119.440(a)(1) | ASTM B 152 | 1997 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Coast Guard | 46 CFR 25.45-2(b)(3)(ii) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.077-19(b)(1) | UL 1517 | 2012 | Hybrid Personal Flotation Devices NDG DHS/USCG | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 96.07-5(d) | ABS Publication | 2013 | All ABS Standards | American Bureau of Shipping |