This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(6) | API Bulletin 92L | 2015 | Drilling Ahead Safely with Lost Circulation in the Gulf of Mexico | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1903 | COS Safety Publication COS-2-01 | 2012 | Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition | Center for Offshore Safety | |
Safety and Environmental Enforcement Bureau | 83 FR 49259 | 30 CFR 250.872 (a) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(6) | ASME SPPE-1 | 1994 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(5) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.517(h) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(7) | API MPMS | 1994 | Chapter 1—Vocabulary | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(8) | API MPMS | 1995 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(72) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(20) | AWS D1.1:2000 | 1999 | Structural Welding Code—Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 81 FR 26022 | 30 CFR 250.734 (a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(29) | API MPMS | 2007 | Chapter 10, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(7) | ASTM C33 | 2007 | Standard Specification for Concrete Aggregates | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(24) | API MPMS | 2008 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(88) | ANSI/API Spec. 16A | 2004 | Specification for Drill-through Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(20) | API RP 2SK | 2005 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(v) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.108(d) | API Spec. 2C | 2004 | Specifications for Offshore Cranes | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(40) | API MPMS | 1986 | Chapter 11.2.2—Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60 °F/60 °F) and −50 °F to 140 °F Metering Temperature | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(2) | ASTM C94/C 94M-07 | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(1) | ACI Standard 318-95 | 1995 | Building Code Requirements for Reinforced Concrete | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(35) | API MPMS | 2007 | Chapter 11.2.2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.858(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(2) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(40) | API MPMS | 2006 | Chapter 14, Section 3, Part 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(20) | AWS D1.1 | 2000 | Structural Welding Code--Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(83) | API MPMS | 2004 | Chapter 11—Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils; incorporating Addendum 1, September 2007 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(56) | API MPMS | 2006 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Addendum to Section 2—Flow Measurement Using Electronic Metering Systems, Inferred Mass | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(c)(2) | API RP 2RD | 1998 | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1903 | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 83 FR 49259 | 30 CFR 250.872 (a) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(8) | ANSI Z88.2 | 1992 | Respiratory Protection | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(49) | API RP 2FPS | 2001 | Recommended Practice for Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.618(a) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(9) | API MPMS | 1989 | Chapter 2—Tank Calibration | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(73) | API RP 17H | 2013 | Remotely Operated Tools and Interfaces on Subsea Production Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4-98 | 1998 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
Safety and Environmental Enforcement Bureau | 84 FR 21981 | 30 CFR 250.735(a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(30) | API MPMS | 2007 | Chapter 10, Section 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(57) | API RP 14E | 2007 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(25) | API MPMS | 2015 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(89) | ANSI/API Spec. 16C | 1993 | Specification for Choke and Kill Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(vi) | API RP 14E | 1991 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(12) | API MPMS | 2005 | Chapter 4, Section 4 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(69) | API Spec. 2C | 2004 | Specifications for Offshore Cranes | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(41) | API MPMS | 2004 | Chapter 11—Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products and Lubricating Oils | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(3) | ASTM C150-07 | 2007 | Standard Specification for Portland Cement | ASTM International |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(2) | ACI 318R-95 | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.859(a)(1) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute |