Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(i)(1) | NACE MR0175-2003 | 2003 | Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments | National Association of Corrosion Engineers |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.852(e)(4) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(47) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design, Twenty-first Edition, December 2000; Errata and Supp 1, December 2002; Errata and Supp 2, September 2005; Errata and Supp 3, October 2007 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(23) | NACE MR-0175 | 2003 | Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment | National Association of Corrosion Engineers | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(d)(2) | ANSI/ASME B 31.8-2003 | 2003 | Gas Transmission and Distribution Piping Systems | American National Standards Institute |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(63) | API RP 2SK | 2005 | Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(4) | API Bulletin 2INT-DG | 2007 | Interim Guidance for Design of Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.869(b) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(13) | API RP 2T | 1997 | Planning, Designing and Constructing Tension Leg Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(8) | ANSI Z88.2 | 1992 | Respiratory Protection | American National Standards Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(15) | API MPMS | 2000 | Chapter 4—Proving Systems | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(79) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(82) | API MPMS | 2005 | Chapter 5—Metering, Section 8—Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology; First Edition | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(20) | AWS D1.1:2000 | 1999 | Structural Welding Code—Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(4)(i) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(8) | API RP 2FPS | 2001 | Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.446(a) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 81 FR 26022 | 30 CFR 250.734 (a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(27) | API MPMS | 2005 | Chapter 9, Section 1 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(31) | API MPMS | 1995 | Chapter 8—Sampling, Section 2—Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(95) | API Standard 65—Part 2 | 2010 | Isolating Potential Flow Zones During Well Construction; Second Edition | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.517(h) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(36) | API MPMS | 2002 | Chapter 11, Section 2, Part 2 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(i)(1) | ASTM C 33 | 2007 | Standard Specification for Concrete Aggregates | ASTM International | |
| Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(v) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(11) | API MPMS | 2003 | Chapter 4, Section 2 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(47) | API MPMS | 1990 | Chapter 14—Natural Gas Fluids Measurement, Section 3—Concentric Square-Edged Orifice Meters, Part 1—General Equations and Uncertainty Guidelines | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(48) | API MPMS | 2000 | Chapter 14—Natural Gas Fluids Measurement, Section 3—Concentric Square-Edged Orifice Meters, Part 2—Specification and Installation Requirements | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(i)(2) | NACE RP0176-2003 | 2003 | Standard Recommended Practice, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production | National Association of Corrosion Engineers |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.855 | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(48) | API RP 2D | 2007 | Recommended Practice for Operation and Maintenance of Offshore Cranes | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(24) | NACE RP-0176 | 2003 | Standard Recommended Practice for Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production | National Association of Corrosion Engineers | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(e)(1) | ACI 318 | 1995 | Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(d)(3) | ANSI Z88.2-1992 | 1992 | American National Standard for Respiratory Protection | American National Standards Institute |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(64) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(5) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.869(c) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(14) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(16) | API MPMS | 1999 | Chapter 4—Proving Systems | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(80) | API RP 2556 | 1993 | Recommended Practice for Correcting Gauge Tables for Incrustation | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(83) | API MPMS | 2004 | Chapter 11—Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils; incorporating Addendum 1, September 2007 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4-98 | 1998 | Structural Welding Code—Reinforcing Steel | American Welding Society | |
| Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(4)(iii) | API STD 6AV2 | 2014 | Installation, Maintenance, and Repair of Surface Safety Valves and Underwater Safety Valves Offshore | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(10) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(65) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21981 | 30 CFR 250.735(a) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(4) | ANSI/ASME B16.5 | 2003 | Steel Pipe Flanges and Pipe Fittings | American Society of Mechanical Engineers | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(28) | API MPMS | 2003 | Chapter 9, Section 2 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(32) | API MPMS | 2002 | Chapter 9—Density Determination, Section 1—Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | American Petroleum Institute |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(96) | API Standard 2552 | 1966 | USA Standard Method for Measurement and Calibration of Spheres and Spheroids | American Petroleum Institute |