This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(1) | ANSI B30.5, 5-1.1.1 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Load Ratings—Where Stability Governs Lifting Performance”), paragraphs (a)-(d) (including subparagraphs) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(37) | ANSI H38.7 | 1969 | Specification for Aluminum Alloy Seamless Pipe and Seamless Extruded Tube | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(12) | SAE J-394 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.163 | ANSI/NFPA 18 | 2014 | Wetting Agents | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(75) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.603(a)(2) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b)(1)(i)(C) | 29 CFR 1910.253(b)(1)(ii) | 2013 | Cylinders and Containers, Approval and Marking | Occupational Safety and Health Administration, U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(20)(iv)(D) | NFPA 96 | 1970 | Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.1a | 1967 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 887 | 2012 | Standard Specifications for Personal Climbing Equipment | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | ANSI/NFPA 20 | 2014 | Centrifugal Fire Pumps | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.179(c)(2) | ANSI A14.3 | 1956 | Safety Requirements for Fixed Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1116 | 2008 | Standard Test Method for Determining Dielectric Strength of Dielectric Footwear | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(1)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.67(c)(5)(i) | AWS B3.0 | 1941 | Standard Qualification Procedure | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(5) | ASTM D 323 | 1968 | Standard Method of Test for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(14) | ANSI B30.5, 5-1.9.4 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Locomotive Crane Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(i) Note to paragraph (c)(2)(i) | ASTM F 1236 | 2012 | Standard Guide for Visual Inspection of Electrical Protective Rubber Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.141(a)(2) Potable water | 40 CFR 141 | 2013 | National Primary Drinking Water Regulations | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(3) | ANSI A14.5 | 1992 | Safety Requirements for Portable Reinforced Plastic Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(ii) | NFPA 1971 | 2000 | Standard on Protective Ensemble for Structural Fire Fighting | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM F 1959/F 1959M | 2012 | Standard Test Method for Determining the Arc Rating of Materials for Clothing. | ASTM International | |
Occupational Safety and Health Administration | 49 CFR 173.3(d)(2)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(i) | ASTM B 241 | 1969 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.602(b)(3) | PCSA 2 | 1968 | Mobile Hydraulic Crane Standards | Power Crane and Shovel Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.120(j)(1)(ii) | 40 CFR | 2013 | EPA Hazardous Waste Container Regulations | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 17 | 2014 | Dry Chemical Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.252(a)(1) | NFPA 51B | 1962 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(i)(4) | ANSI Z41.1 | 1967 | Men's Safety Toe Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | NFPA 91 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.94(b)(4)(ii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.152(d)(3) | NFPA 13 | 1969 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.158(a)(1) | 46 CFR Part 160 | 2014 | Coast Guard Lifesaving Equipment Specifications | U.S. Coast Guard | |
Occupational Safety and Health Administration | 29 CFR 1926.6(y)(5) | NFPA 251 | 1969 | Standard Methods of Fire Test of Building Construction and Material | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1436(c)(1)(ii) | ANSI/AWS D14.3 | 1994 | Specification for Welding Earthmoving and Construction Equipment | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1917.91(a)(1)(ii) | ANSI/ISEA Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | International Safety Equipment Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(s)(1) | NIOSH Publication | 1978 | Registry of Toxic Effects of Chemical Substances | National Institute for Occupational Safety and Health | |
Occupational Safety and Health Administration | 29 CFR 1926.100(b)(2) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(10) | ANSI A17.1d | 1970 | Safety Code for Elevators, Dumbwaiters, and Moving Walks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | NFPA 1231 | 1993 | Water Supplies for Suburban and Rural Fire Fighting | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.507(d)(2)(i) | NFPA 13 | 2002 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 36 | 2004 | Solvent Extraction Plants | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.272 Appendix B | ANSI/NFPA 66 | 2014 | Pneumatic conveying systems for agricultural commodities | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(37) | ASTM D 445 | 1965 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1950 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(3) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute |