Occupational Safety and Health Administration |
|
29 CFR 1926.552(d) |
ANSI A17.1d |
1970 |
Safety Code for Elevators, Dumbwaiters and Moving Walks
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix A Section 1910.158 (7) |
NFPA 14 |
2013 |
Standpipe and Hose Systems
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(10) |
NFPA 54 |
1969 |
Standard for the Installation of Gas Appliances and Gas Piping
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(e)(50) |
ANSI Z9.1 |
1971 |
Practices for Ventilation and Operation of Open-Surface Tanks
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix A Section 1910.156 (7)(C) |
NFPA 1971 |
1975 |
Protective Clothing for Structural Fire Fighters
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
NFPA 32 |
2004 |
Dry-cleaning Plants
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(10) |
ANSI A17.2 |
1960 |
Practice for the Inspection of Elevators (Inspector's Manual)
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(ff)(3) |
ANSI B30.5 |
1968 |
Crawler, Locomotive, and Truck Cranes
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(26) |
ASTM D3828 |
2007 |
Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(iv)(A)(2) |
CGA S-1.2 |
1963 |
Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases
|
Compressed Gas Association |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix E (1)(C) |
MIL-B-2885D |
1975 |
Military Specification For Fireman's Boots amendment
|
U.S. Department of Defense |
Occupational Safety and Health Administration |
|
29 CFR 1926.200(i) |
ANSI Z535.5 |
2011 |
Safety Tags and Barricade Tapes (for Temporary Hazards)
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(b)(20)(iv)(A) |
NFPA 54 |
1969 |
Standard for the Installation of Gas Appliances and Gas Piping
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1910.111(b)(2)(vi) |
ASME B&PV Code |
1959 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.179(b)(6)(i) |
CMAA Specification 61 |
2014 |
Specifications for Electric Overhead Traveling Cranes
|
Crane Manufacturer's Association of America |
Occupational Safety and Health Administration |
|
29 CFR 1910.269(u)(1) Note (3) |
ANSI C2 |
1987 |
National Electrical Safety Code
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1915.507(b)(2) |
NFPA 10 |
2002 |
Standard for Portable Fire Extinguishers
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix C (II)(A)(22) |
ANSI Z88.5 |
2014 |
Practice for Respiratory Protection for the Fire Service
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(f)(5) |
ANSI Z88.2 |
1969 |
Respiratory Protection
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(14) |
ASTM D86 |
1962 |
Test for Distillation of Petroleum Products
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.67(c)(4) |
ANSI A92.2 |
1969 |
Standard for Vehicle Mounted Elevating and Rotating Work Platforms
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.1001(f)(2)(iv) |
ASTM A370 |
2014 |
Methods and Definitions for Mechanical Testing of Steel Products
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(b)(8)(ii) Table H-25 Footnote 1 |
ASTM B210 |
1968 |
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.602(c)(1)(v) |
ANSI B56.1 |
1969 |
Safety Standard for Powered Industrial Trucks
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(5) |
ANSI/NSC Z41 |
1991 |
Protective Footwear
|
National Safety Council |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(q)(23) |
NFPA 96 |
1970 |
Standard for the Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(iv) |
NFPA 1982 |
1998 |
Standard on Personal Alert Safety Systems (PASS)
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(w)(1) |
IME Publication 2 |
1964 |
American Table of Distances for Storage of Explosives
|
Institute of Makers of Explosives |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(x)(1) |
IFC-2009 |
2009 |
International Fire Code
|
International Code Council |
Occupational Safety and Health Administration |
|
29 CFR 1926.102 (b)(ii) |
ANSI Z87.1-2003 |
2003 |
Occupational and Educational Personal Eye and Face Protection Devices
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart L Appendix B 1910.164 |
ANSI/NFPA 72E |
2014 |
Automatic Fire Detectors
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1910.119, Appendix D |
API RP 2220 |
1991 |
Improving Owner and Contractor Safety Performance
|
American Petroleum Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(26) |
ANSI Z49.1 |
1967 |
Safety in Welding and Cutting
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(15) |
ASTM D86 |
2007 |
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1926.97(a) Note to paragraph (a) |
ASTM D120 |
2009 |
Standard Specification for Rubber Insulating Gloves
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(5)(iii) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1917.3(b)(4) |
ANSI/NSC Z41 |
1999 |
Protective Footwear
|
National Safety Council |
Occupational Safety and Health Administration |
|
29 CFR 1926.1433(b)(7) |
ANSI B30.5, 5-1.4 |
2004 |
Safety Code for Crawler, Locomotive and Truck Cranes, Swing Mechanism
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.110(b)(5)(iii) |
29 CFR 1910.253(b)(1)(ii) |
2013 |
Cylinders and Containers, Approval and Marking
|
Occupational Safety and Health Administration, U.S. Department of Labor |
Occupational Safety and Health Administration |
|
29 CFR 1910.120(j)(1)(ii) |
49 CFR |
2013 |
DOT Hazardous Waste Container Regulations
|
U.S. Department of Transportation |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(g)(4) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.200(h)(2) |
ANSI Z535.5 |
2011 |
Safety Tags and Barricade Tapes (for Temporary Hazards)
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(3) |
ASTM A126 |
1966 |
Gray iron Casting for Valves, Flanges and Pipe Fittings
|
ASTM International |
Occupational Safety and Health Administration |
|
29 CFR 1910.261(i)(2) |
ANSI O1.1 |
1961 |
Safety Code for Woodworking Machinery
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.94(b)(4)(i) |
ANSI Z9.2 |
1960 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1910.133(b)(1)(ii) |
ANSI Z87.1 |
1998 |
Practice for Occupational and Educational Eye and Face Protection
|
American National Standards Institute |
Occupational Safety and Health Administration |
|
29 CFR 1926.152(c)(7) |
NFPA 30 |
1969 |
Flammable and Combustible Liquids Code
|
National Fire Protection Association |
Occupational Safety and Health Administration |
|
29 CFR 1928.51(b)(2)(ii) |
SAE J-4C |
1965 |
Motor Vehicle Seat Belt Assembly
|
Society of Automotive Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(4)(iii)(A) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels
|
American Society of Mechanical Engineers |
Occupational Safety and Health Administration |
|
29 CFR 1926.6(n)(2) |
BS EN 14439 |
2006 |
Cranes--Safety--Tower Cranes
|
British Standards Institution |