This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 40 CFR 60.485(d)(1) | ASTM E169 | 1977 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 160.077-5(b)(2) | Federal Standard 191 | 1978 | Method 5132, Strength of Cloth, Tearing; Falling-Pendulum Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 10 CFR 440 Appendix A | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 160.055-1(a)(1) | MIL-C-43006D | 1989 | Cloth and Strip Laminated, Vinyl Nylon High Strength, Flexible | U.S. Department of Defense | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(1)(i) | ASTM D1045 | 2008 | Standard Test Methods of Sampling and Testing Plasticizers used in Plastics | ASTM International | |
Coast Guard | 46 CFR 121.200 | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 7 | ASTM B858M | 1995 | Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using Ammonia Vapor Test | ASTM International | |
Coast Guard | 46 CFR 172.020(b)(1) | IMO Resolution A.264(VIII) | 1960 | Amendment to Chapter VI of the International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 46 CFR 28.335(g)(2) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure, and Commercial Motorcraft | National Fire Protection Association | |
Coast Guard | 46 CFR 110.10-1(g)(13) | IEC 60079-15 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 15: Type of Protection “n”, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 54.01-1(c)(1) | ASTM A20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 111.105-7(b) | NFPA 496 | 2003 | Standard for Purged and Pressurized Enclosures for Electrical Equipment | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Note | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 193.30-1 | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 7 CFR 1755.405(b)(3) | ANSI T1.506a | 1992 | Specifications for Switched Exchange Access Network | American National Standards Institute | |
Coast Guard | 46 CFR 15.103(d) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 111.12-3 | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Coast Guard | 46 CFR 56.95-10(a) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 15.1103(f) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Coast Guard | 33 CFR 154.1045(i)(2)(iii) | ASTM F1413 | 2007 | Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems | ASTM International | |
Coast Guard | 33 CFR 157.02(b)(8) | IMO Resolution A.751(18) | 1993 | Interim Standards for Ship Manoeuvrability, Annex sections 1.2, 2.3-2.4, 3-4.2, and 5 with Explanatory Notes in MSC/Circ. 644 | International Maritime Organization | |
Coast Guard | 46 CFR 110.15-1(b), Dripproof | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-69 | 1996 | Pipe Hangers and Supports -- Selection and Application | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 21 CFR 173.370(c) | Ecolab Publication | 2001 | Determination of 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) Peroxyacid/Peroxide-Containing Solutions | Ecolab Inc. | |
Coast Guard | 46 CFR 58.03-1(g)(7) | ASTM D92 | 1997 | Standard Test for Flash and Fire Points by Cleveland Open Cup | ASTM International | |
Coast Guard | 46 CFR 105.3(b)(1) | ASTM D323-08 | 2008 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 46 CFR 110.15-1(b), Dripproof | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-61 | 2001 | Pressure Testing of Steel Valves | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 58.03-1(g)(8) | ASTM D93 | 1997 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 105.3(c)(1) | UL 19 | 2001 | Standard for Safety—Lined Fire Hose and Hose Assemblies | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 118.425(b) | NFPA 17A | 1994 | Wet Chemcial Extinguishing Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 113.30-25(i) | NEMA Publication 250 | 2001 | Enclosures for Electrical Equipment (1000 Volts Maximum) | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 160.171-17(n) | ASTM D1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Coast Guard | 46 CFR 63.05-1(c)(1) | ASME CSD-1 | 2004 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 154, Appendix B, 3.3.1 | ASME B&PV Code | 2005 | Section VIII, Division 1, Pressure Vessels | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 175.270(b)(5) | ASTM D1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International | |
Coast Guard | 46 CFR 125.180(b) | UL 486A | 1992 | Wire Connectors and Soldering Lugs for Use with Copper Conductors | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.005-4(h) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 33 CFR 126.5(b) | NFPA 10 | 1988 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(1)(ii) | EPA Method 200.8 | 1991 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 172.385(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 153.0(a)(1) | IMO Resolution MEPC 18(22) | 1985 | IMO Standards for Procedures and Arrangements for the Discharge of Noxious Liquid Substances | International Maritime Organization | |
Coast Guard | 46 CFR 160.055-5(c)(3) | Drawing No. 160.055-1B, Sheet 1 | 2012 | Life Preservers, Unicellular Foam, Child, Construction and Arrangement, Cloth Covered, Model 63, Adult | U.S. Coast Guard | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC P-1 | 1973 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 116.423(a)(3) | NFPA 701 | 1996 | Fire Tests for Flame-Resistant Textiles and Films | National Fire Protection Association | |
Coast Guard | 33 CFR 154.106(e)(1) | IEC 309-1 | 1988 | Plugs, Socket-Outlets and Couplers for Industrial Purposes: Part 1, General Requirements | International Electrotechnical Commission | |
Coast Guard | 46 CFR 56.01-2(k)(8) | MSS SP-55 | 2001 | Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components-Visual Method | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 182.440(a)(2)(i) | ASTM D635 | 1997 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM International | |
Coast Guard | 46 CFR 160.077-19(c)(15) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 444.12(b)(1) Table (7) | APHA Method 3112 B | 1999 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association |