This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.6.3(a) | SAE J-1703b | 1970 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(26) | NFPA 203M | 1970 | Manual on Roof Coverings | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(d)(1)(iii) | API 620 | 1970 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Coast Guard | 46 CFR 125.180(b) | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(j)(1) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 3280.611(d)(5)(iv) | FedSpec ZZ-R-765B | 1970 | Rubber Silicone | Federal Specifications Standards and Test Methods | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5300-8 | 1970 | Planning and Design Criteria for Metropolitan STOL Ports | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.010-1(d)(1) | MIL-P-19644C | 1970 | Plastic Foam, Molded Polystyrene (Expanded Bead Type) | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.265(d)(2)(i)(A) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 533.3R | 1970 | Fabrication, Handling and Erection of Precast Concrete Wall Panels | American Concrete Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (c)(22)(i) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.104(b)(5)(ii) | ANSI Addenda B31.10a | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(27) | NFPA 251 | 1969 | Standard Methods of Fire Tests of Building Construction and Materials | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(16) | ANSI B56.1 | 1969 | Safety Standards for Powered Industrial Trucks | American National Standards Institute | |
Coast Guard | 30 CFR 75.1107-17 | NFPA 15 | 1969 | Standard for Water Spray Fixed Systems for Fire Protection | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5325-8 | 1969 | Compass Calibration Pad | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(72) | ANSI Z88.2 | 1969 | Practices for Respiratory Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(5) | AWS D2.0 | 1969 | Specifications for Welding Highway and Railway Bridges | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1926.602(c)(1)(vi) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks | American National Standards Institute | |
Coast Guard | 46 CFR 154.1400(a)(6) | ANSI Z89.1 | 1969 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(b) | 150/5390-1A | 1969 | Heliport Design Guide | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(12) | ANSI A90.1 | 1969 | Safety Standard for Manlifts | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.261(s) Silvery iron | ASTM A 100 | 1969 | Standard Specification for Ferrosilicon | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.178(a)(2) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks, Part II | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 233.70(a)(5) | MIOD regulations | 1969 | The Michigan Administrative Procedures Act of 1969, MCL 24-201 et seq. | State of Michigan | |
Federal Aviation Administration | 14 CFR 152, Appendix B(b) | 150/5390-1A | 1969 | Heliport Design Guide | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(y)(3) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.552(b)(8) | ANSI A10.5 | 1969 | Safety Requirements for Material Hoists | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(ii) | SAE J-394 | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.134(i)(1)(i) | USPHS Publication | 1969 | U.S. Pharmacopeia | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(13)(ii)(B)(1) | ASTM B 88 | 1969 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.178(a)(3) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks, Part II | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.178(f)(1) | NFPA 30 | 1969 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(15) | SAE J-397 | 1969 | Critical Zone Characteristics and Dimensions for Operators of Construction and Industrial Machinery | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.67(b)(1) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.152(b)(4)(i) | NFPA 251 | 1969 | Standard Methods of Fire Tests for Building Construction and Materials | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(13) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(3) | ASTM D 56 | 1969 | Standard Method of Test for Flash Point by the Tag Closed Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(v)(B) | ANSI Addenda B31.1 | 1969 | Addendum to Code for Pressure Piping | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 179.100-14(a)(1) | AAR Publication | 1969 | AAR Specification for Design, Fabrication and Construction of Freight Cars, Appendix E | Association of American Railroads | |
Occupational Safety and Health Administration | 29 CFR 1910.265(c)(30)(iv) | ANSI B56.1 | 1969 | Safety Code for Powered Industrial Trucks | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(i) | SAE J-320a | 1969 | Minimum Performance Criteria for Rollover Protective Structure for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (2) | SAE J-941b | 1969 | Motor Vehicle Driver's Eye Range | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.178(f)(2) | NFPA 58 | 1969 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(i)(7) | AWS D10.9 | 1969 | Standard Qualification of Welding Procedures and Welders for Piping and Tubing | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1910.67(b)(2) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 533.2R | 1969 | Selection and Use of Materials for Precast Concrete Wall Panels | American Concrete Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(3)(iv) | NFPA 58 | 1969 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(3) | ASTM A 100 | 1969 | Standard Specification for Ferrosilicon | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.95 Appendix E | ANSI S3.6 | 1969 | Specifications for Audiometers | American National Standards Institute |