This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Mine Safety and Health Administration | 30 CFR 77.1103(a) | NFPA Publication | 1962 | Flammable and Combustible Liquids Standards | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B Supplement 1 | 1962 | Specification for Bolted Production Tanks, Supplement 1 | American Petroleum Institute | |
Mine Safety and Health Administration | 30 CFR 77.301(b) | NFPA Handbook | 1962 | Section 9, Installation of Pulverized Fuel Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Subpart S | ASTM C 34 | 1962 | Structural Clay Load-Bearing Wall Tile | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1962 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.119(b) Boiling Point | ASTM D 86 | 1962 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(2) | CGA C-8 | 1962 | Standard for Requalification of ICC-3HT Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1963 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
Labor Department | 41 CFR 50-204.71 | CGA S-1.1 | 1963 | Safety Release Device Standard--Cylinders for Compressed Gases and 1965 Addenda | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1926.552(c)(16) | ANSI A10.4 | 1963 | Safety Requirements for Workmen's Hoists | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Daylight opening | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(iv)(A)(2) | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (1) | SAE J-602 | 1963 | Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.062-3(a) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(iv)(A)(2) | CGA S-1.1 | 1963 | Safety Release Device Standard--Cylinders for Compressed Gases | Compressed Gas Association | |
Public Health Service | 42 CFR 84.41(b) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60.485a(d)(1) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.159(a)(2) | NFBU 13 | 1963 | Rules and Regulations of the National Board of Fire Underwriters for Sprinkler Equipment Automatic and Open Systems | National Board of Fire Underwriters | |
Coast Guard | 46 CFR 160.062-4(d)(1) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Public Health Service | 42 CFR 84.41(h) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 571.202 S5.1(a)(4) | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(15) | SAE J-602 | 1963 | Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Coast Guard | 29 CFR 1926.6(h)(2) | ANSI A10.4 | 1963 | Safety Requirements for Workmen's Hoists | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.593a(b)(2) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-2 | 1963 | Specification for L-810 Obstruction Light | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(49) | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards | Society of Automotive Engineers | |
Public Health Service | 42 CFR 84.43(a) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60.632(f) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.109(i)(1)(ii)(B) | CGA P-3 | 1963 | Specifications, Properties, and Recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate | Compressed Gas Association | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-2 | 1963 | Specification for L-810 Obstruction Light | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.66(d)(2) | NIST Handbook 69 | 1963 | Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 160.031-1(a)(1) | FedSpec T-R-605B | 1963 | Rope, Manila, and Sisal with 1973 Amendment 3 | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(2) | UL 80 | 1963 | Steel Inside tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Rural Utilities Service | 7 CFR 1755.97(b)(10) | RUS Bulletin 345-180, Form 397a | 1963 | Specification for Voice Frequency Repeaters and Voice Frequency Repeater Trunks | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.031-4(c) | FedSpec T-R-605B | 1963 | Rope, Manila, and Sisal with 1973 Amendment 3 | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(1) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(9) | API 2201 | 1963 | Welding or Hot Tapping on Equipment Containing Flammables | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(7) | CGA P-3 | 1963 | Specifications, Properties, and recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate | Compressed Gas Association | |
Mine Safety and Health Administration | 30 CFR 77.1304(a) | DOI/BOM Information Circular 8179 | 1963 | Safety Recommendations for Sensitized Ammonium Nitrate Blasting Agents | Bureau of Mines, U.S. Department of Interior | |
Coast Guard | 46 CFR 162.028-3(e) | MIL-STD-167 | 1963 | Mechanical Vibrations of Shipboard Equipment | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60.485(d)(1) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 141.66(d)(2) | NIST Handbook 69 | 1963 | Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S6.4.5 | SAE J-602 | 1963 | Headlamps Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(1) | UL 80 | 1963 | Standard for Steel Inside Tanks for Oil-Burner Fuel | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 60.17(g)(194) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(1)(vi) | API 2201 | 1963 | Welding or Hot Tapping on Equipment Containing Flammables | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 60.593(b)(2) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 581.6(b)(1) | SAE J-449a | 1963 | Surface Texture Control | Society of Automotive Engineers |