This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 799.5089(h)(1)(iii) | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.3(c) B11 | API 1130 | 2002 | Computational Pipeline Monitoring | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII, Paragraph 200 | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 155.140(c)(3) | ASTM F 722 | 1993 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (c)(6) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Coast Guard | 46 CFR 162.161-6(b) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (25) | AOAC Method 993.30 | 1998 | Fluoride, mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | Chromocult Coliform Agar Presence/Absence Membrane | 2000 | Simultaneous detection of Coliform bacteria and E. coli in water | Merck KGaA | |
Environmental Protection Agency | 40 CFR 272, Subpart XX | WVHWMP | 2015 | State of West Virginia Hazardous Waste Management Program (Reserved) | State of West Virginia | |
Research and Special Programs Administration | 49 CFR 173.56(b)(2)(i) | DOD TB 700-2 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 75, Appendix A, Section 6.1.2(g) | ASTM D 7036 | 2004 | Standard Practice for Competence of Air Emission Testing Bodies | ASTM International | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.66(a) | National Formulary | 1980 | Formula No. 38-C | U.S. Pharmacopeial Convention | |
Environmental Protection Agency | 40 CFR 61.245(e)(3) | ASTM D 2382 | 1976 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.937(a)(1) | ANSI Z124.3 | 1980 | Plastic Lavatories | American National Standards Institute | |
Coast Guard | 46 CFR 160.057-4(d)(9) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 572.176(b) | Drawing No. 420-5200 | 2011 | Lower upper leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 9 | ASTM Annual Book of Standards | 1996 | Water and Environmental Technology--Section 11.02 | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D 5192 | 2009 | Standard Practice for Collection of Coal Samples from Core | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.949(a)(1)(iv) | ISDSI 102 | 1984 | Installation Standard for Insulated Door Systems | Insulated Steel Door Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.927(b) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(iii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 164.46(a)(3)(iii), Note to 164.46(a) | IMO SN/Circ. 227 | 2003 | Guidelines for the Installation of a Shipborne Automatic Identification System (AIS) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 52.741(a)(3), Standard Industrial Classification Manual | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Environmental Protection Agency | 40 CFR 264.1033(e)(2) | ASTM D 2382 | 1983 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (37) | ASTM D 1886C | 1998 | Standard Test Methods for Nickel in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | IAPMO PS 9 | 1984 | Material and Property Standard for Diversion Tees and Twin Waste Elbow | International Association of Plumbing and Mechanical Officials | |
Public Health Service | 42 CFR 37.10(f)(1) | DICOM Standard PS 3.3-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 3: Information Object Definitions | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 53.01-10(a) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Daylight opening | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (37) | EPA Method 614.1 | 1993 | The Determination of Organophosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 46 CFR 25.45-2(b)(3)(iii) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | ASTM D 516 | 1990 | Standard Test Method for Sulfate Ion in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.2145(t)(4)(i) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 177.1820(c)(3) | FDA Publication | 1989 | Determination of Residual Maleic Anhydride in Polymers by Gas Chromatography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 40 CFR 1065.720 Table 1 | ASTM D 1837 | 2011 | Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.32(c)(4)(i) | ASME UPV Code | 1946 | Code for Unfired Pressure Vessels | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5300-2C | 1976 | Airport Design Standards--Site Requirements for Terminal Navigational Facilities | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.17(g)(123) | ASTM D 3178 | 1979 | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Coal and Coke | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.53(a) | 10 CFR Part 20 | 2014 | Protection Against Radiation | U.S. Nuclear Regulatory Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (40) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 900.0 | 1980 | Gross Alpha and Gross Beta Radioactivity | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 6.0 (1) | ANSI/ASQC E 4 | 2004 | Specifications and Guidelines for Quality Systems for Environmental Data Collection and Environmental Technology Programs | American Society for Quality Control | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(x) | AASHTO LRFDLTS-1-I4, 2020 | 2017 | Transportation Materials | American Association of State Highway and Transportation Officials | |
Federal Aviation Administration | 14 CFR 29.613(d)(4) | MIL-HDBK-23 | 1988 | Structural Sandwich Composites | U.S. Department of Defense | |
Coast Guard | 46 CFR 110.10-1(o)(14) | UL 1203 | 2004 | Standard for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 178.2650(b)(1)(iii) | FDA Publication | 1977 | Atomic Absorption Spectrometric Determination of Sub-Part-Per-Million Quantities of Tin in Extracts and Biological Materials with Graphite Furnace, Analytical Chemistry, Vol 49, p. 1090-1093 | Food and Drug Administration, U.S. Department of Health and Human Services | |
Rural Utilities Service | 7 CFR 1755.890(i)(4)(iii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
National Highway Traffic Safety Administration | 49 CFR 572.11(b) | Drawing No. SA 150 M010 | 1987 | Head assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.218(d)(4) | ANSI B31.1.0 Addenda | 2014 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Coast Guard | 33 CFR 157.12(b)(2) | IMO Resolution A.586(14) | 1985 | Revised Guidelines and Specifications for Oil Discharge Monitoring and Control Systems for Oil Tankers | International Maritime Organization |