This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 61.04(c)(1)(ii) | NH State Regulations, Env-A 1800 | 2008 | Asbestos Management and Control, Sections 1801-1807, excluding the following provisions: 1801.02(e), 1802.02, 1802.04, 1802.07-1802.09, 1802.13, 1802.15-1802.17, 1802.28-1802.29, 1802.36, 1802.42, 1802.45, 1802.50, 1802.54, 1804.05-1804.09, and 1807.02 | State of New Hampshire | |
Environmental Protection Agency | 40 CFR 68.115(b)(2)(i) | NFPA 30 | 1996 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(1) | ANSI A14.1 | 1990 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | NFPA 70 | 1996 | National Electrical Code (NEC) Section 310-15 | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.35(b)(2)(i) | Drawing No. 78051-16 | 1987 | Knee cap assembly | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (76) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a) | IOA Indigo Method | 1982 | Determination of Ozone in Water by the Indigo Method, (Bader and Hoigne) | International Ozone Association | |
Occupational Safety and Health Administration | 29 CFR 1910.101(c) | CGA S-1.1 Addendum | 1965 | Safety Release Device Standard--Cylinders for Compressed Gases Addendum | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 60.251(k) Lignite | ASTM D 388 | 1991 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-3, Method 5, Section 7.1.3 | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Food and Drug Administration | 21 CFR 172.385(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | NSF 61 | 2001 | Drinking Water System Components-Health Effects | National Sanitation Foundation | |
Labor Department | 41 CFR 50-204.65 | 14 CFR 103 | 2012 | Transportation of Compressed Gases | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 F | 1998 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.146(m) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Mine Safety and Health Administration | 30 CFR 57.6201(b)(2) | IME Guide | 1993 | Generic Loading Guide for the IME-22 Container | Institute of Makers of Explosives | |
National Archives and Records Administration | 36 CFR 1234.3(c)(1) | UMC-1 | 2003 | Uniform Mechanical Code | International Association of Plumbing and Mechanical Officials | |
Mine Safety and Health Administration | 30 CFR 75.1107-4(b) | NFPA 72A | 1967 | Installation, Maintenance, and Use of Local Protective Signaling Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | AOAC Method 993.14 | 1998 | Potassium-Total, mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 799.5085(h)(1)(vi) | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Environmental Protection Agency | 40 CFR 98.164(b)(5)(xviii) | ISO 3171 | 1988 | Petroleum Liquids—Automatic pipeline sampling—Second Edition | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 58 | 1961 | Steel Underground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 808 | 1987 | Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.202a S5.3.4 | SAE J-826 | 1995 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.50-1 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 17 | APHA Standard Methods, 14th Edition | 1975 | Standard Methods for the Examination of Water and Wastewater. 14th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 264.552(d)(4)(iv)(F) | EPA Method 1311 | 1992 | Toxicity Characteristic Leaching Procedure (and in Basic Manual Update I) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1329(c)(2)(i) | ASTM D 2908 | 2011 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Coast Guard | 21 CFR 172.167(b) | Food Chemicals Codex | 2008 | Food Chemicals Codex, 6th Edition | U.S. Pharmacopeial Convention | |
Rural Utilities Service | 7 CFR 1755.703(a)(2) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.255-15(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1060.810(a) Table 1 | ASTM D 4806 | 2007 | Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel | ASTM International | |
Food and Drug Administration | 21 CFR 101.4(h)(2) | IAPT Publication | 1994 | International Code of Botanical Nomenclature | International Association for Plant Taxonomy | |
Coast Guard | 46 CFR 160.151-27(c)(4) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.720 Table 1 Note 2 | ASTM D 1267 | 2012 | Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (2-Methyl-4-chlorophenoxyacetic acid) | EPA Method 615 | 1993 | The Determination of Chlorinated Herbicides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 192.55(e) | API 5L | 2004 | Specification for Line Pipe | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 178.3620(b)(1)(i) | ASTM D 156 | 1982 | Standard Method of Test for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 17 | 2014 | Dry Chemical Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-558B | 1976 | Insulation Blocks, Boards, Blankets, Felts Sleeving (Pipe and Tub Coverings), and Pipe Fitting Covering, Thermal (Mineral Fiber, Insulation Type) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 161.002-1(b) | UL 268 | 1994 | Smoke Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 3574 | 1986 | Cold-Reduced Carbon Steel Sheet of Commercial and Drawing Qualities | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 178 | 2001 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1211.10(e)(2) | UL 746c | 1995 | Polymeric Material--Use in Electrical Equipment Evaluations | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 177.1020(c)(2) | FDA Publication | 1989 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(ii) | APHA Standard Methods, 15th Edition | 1980 | Standard Methods for the Examination of Water and Wastewater. 15th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.655(i)(4)(iii)(G) | TCEQ Sampling Procedures Manual | 2003 | Appendix P: Cooling Tower Monitoring, Air Stripping Method (Modified El Paso Method) for Determination of Volatile Organic Compound Emissions from Water Sources, Revision Number One | Texas Commission on Environmental Quality | |
Environmental Protection Agency | 40 CFR 63.4141(c) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(75) | API 2552 | 2007 | Measurement and Calibration of Sphere and Spheroids | American Petroleum Institute |