National Highway Traffic Safety Administration |
|
49 CFR 572.161 Table A |
Drawing No. 167-2000 |
2009 |
Upper Torso Assembly
|
Leet-Melbrook |
Environmental Protection Agency |
|
40 CFR 63.786(b) |
ASTM E180 |
1993 |
Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 192.63(a)(1) |
ASTM D2513 |
1987 |
Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings
|
ASTM International |
Coast Guard |
|
46 CFR 160.077-19(d)(2) |
ASTM D751 |
1995 |
Standard Test Methods for Coated Fabrics
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 1060.810(b) Table 2 |
SAE J-30 |
1998 |
Fuel and Oil Hoses
|
Society of Automotive Engineers |
Coast Guard |
|
46 CFR 160.076-31(c)(1) |
UL 1191 |
2008 |
Standard for Components for Personal Flotation Devices
|
Underwriters Laboratories, Inc. |
Coast Guard |
|
46 CFR 63.05-1(g)(3) |
UL 343 |
1997 |
Pumps for Oil-Burning Appliances, Eighth Edition
|
Underwriters Laboratories, Inc. |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (74) |
EPA Method 200.8 |
1994 |
Metals by ICP-MS, Revision 5.4
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 799.5089(h)(2) |
ISO 9439:1999(E) |
1999 |
Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium—Carbon Dioxide Evolution Test. Second Edition
|
International Organization for Standardization |
Coast Guard |
|
33 CFR 181.4(b) |
UL 1123 |
1995 |
Marine Buoyant Devices
|
Underwriters Laboratories, Inc. |
Coast Guard |
|
46 CFR 160.156-13(d)(4)(vii) |
ASTM F1166 |
2007 |
Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (16) |
APHA Method 4110 B |
2000 |
Anions by Ion Chromatography with Chemical Suppression of Eluent
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(lxvi) |
ASTM D7284 |
2008 |
Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 86.1(g)(3) |
SAE J-1850 |
2001 |
Class B Data Communication Network Interface
|
Society of Automotive Engineers |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IG (Permethrin) |
EPA Method 508 |
1995 |
Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 282.81(d)(1)(i)(B) |
NMUSTP |
1995 |
New Mexico Regulatory Requirements Applicable to the Underground Storage Tank Program
|
State of New Mexico |
Occupational Safety and Health Administration |
|
29 CFR 1910.106(b)(1)(iii)(A)(3) |
API 12F |
1961 |
Specification for Small Welded Production Tanks
|
American Petroleum Institute |
National Archives and Records Administration |
|
36 CFR 1237.16(b) |
ISO 18911 |
2000 |
Imaging Materials--Processed Safety Photographic Film--Storage Practices
|
International Organization for Standardization |
National Highway Traffic Safety Administration |
|
49 CFR 572.101(a) |
Drawing No. 92041-006 |
1992 |
Hex Nut
|
Reprographic Technologies |
Research and Special Programs Administration |
|
46 CFR 111.75-5(b) |
IEEE 45 |
2002 |
Recommended Practice for Electrical Installations on Shipboard
|
Institute of Electrical and Electronics Engineers |
Coast Guard |
|
46 CFR 175.600(b) Table |
ABS Publication |
1983 |
Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length
|
American Bureau of Shipping |
Environmental Protection Agency |
|
40 CFR 258.41(a)(4)(iii)(A) |
ASTM D5261 |
1996 |
Standard Test Method for Measuring Mass per Unit Area of Geotextiles
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 3280.703 |
ANSI Z21.47 |
1990 |
Gas-Fired Central Furnaces (Except Direct Vent System Central Furnaces) with Addendum Z21.47A-1990 and Z21.47B-1992
|
American National Standards Institute |
Mine Safety and Health Administration |
|
30 CFR 56.14131(c) |
SAE J-386 |
1997 |
Operator Restraint Systems for Off-Road Work Machines
|
Society of Automotive Engineers |
Coast Guard |
|
46 CFR 56.60-25(a) |
IMO Resolution A.753(18) |
1993 |
Guidelines for the Application of Plastic Pipe on Ships
|
International Maritime Organization |
Energy Department |
|
10 CFR 430 Subpart B, App. V, 3, b |
EPA Publication |
2005 |
ENERGY STAR Program Requirements for Residential Light Fixtures, Version 4.0
|
U.S. Environmental Protection Agency |
Rural Utilities Service |
|
7 CFR 1755.860, Appendix A-III-5-c |
ASTM D4565 |
1990 |
Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 60.106(j)(2) |
ASTM D1552 |
1983 |
Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 3280.714(a)(1)(i) |
ARI 210/240 |
1989 |
Unitary Air-Conditioning and Air-Source Heat Pump Equipment
|
Air Conditioning and Refrigeration Institute |
Coast Guard |
|
46 CFR 160.002-1(b) |
DWG No. F-49-6-5 (Sheet 2) |
2012 |
Cutting Pattern and General Arrangement (Child)
|
U.S. Coast Guard |
National Highway Traffic Safety Administration |
|
49 CFR 572.152(a) |
Drawing No. SA-572-S4 |
1987 |
Accelerometer Specification
|
Reprographic Technologies |
Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 4(f) |
EPA SW-846-6020 |
2014 |
Inductively Coupled Plasma-Mass Spectrometry
|
U.S. Environmental Protection Agency |
Energy Department |
|
10 CFR 434.701.1 RS-23 |
ANSI Z83.9 |
1990 |
Gas-Fired Duct Furnaces (RS-23)
|
American National Standards Institute |
Energy Department |
|
10 CFR 431.293(b)(2) |
ASHRAE 32.1 |
2004 |
Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
Federal Railroad Administration |
|
49 CFR 232.603(a)(5) |
AAR S-4240 |
2007 |
ECP Brake Equipment—Approval Procedure
|
Association of American Railroads |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (26) |
EPA Method 608.2 |
1993 |
The Determination of Certain Organochlorine Pesticides in Municipal and Industrial Wastewater
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 143.4(b) Table (Color) |
APHA Method 2120 B |
1998 |
Color by Visual Comparison
|
American Public Health Association |
Environmental Protection Agency |
|
40 CFR 60.107a(d)(4)(ii) |
ASTM D1945 |
2003 |
Standard Test Method for Analysis of Natural Gas by Gas Chromatography
|
ASTM International |
Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (24) |
EPA Method 624 |
1982 |
Volatile Organic Compounds by Purge and Trap GC/MS
|
U.S. Environmental Protection Agency |
Environmental Protection Agency |
|
40 CFR 141.24(e)(1) Table (Methoxychlor) |
EPA Method 508 |
1995 |
Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1
|
U.S. Environmental Protection Agency |
Safety and Environmental Enforcement Bureau |
|
30 CFR 250.862(a)(3) |
API RP 505 |
1997 |
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2
|
American Petroleum Institute |
Food and Drug Administration |
|
21 CFR 165.110(b)(4)(iii)(F)(20) |
EPA Method 1613 |
1990 |
Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS
|
U.S. Environmental Protection Agency |
Coast Guard |
|
46 CFR 164.023-5 Table 164.023-5(a) |
FedSpec V-T-285E |
1986 |
Thread, Polyester
|
Federal Specifications Standards and Test Methods |
Coast Guard |
|
46 CFR 56.01-2(k)(7) |
MSS SP-53 |
1995 |
Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components-Magnetic Particle Examination Method
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
Energy Department |
|
10 CFR 431.20(c)(4) |
ISO/IEA Guide 25 |
1983 |
General requirements for the competence of calibration and testing laboratories
|
International Organization for Standardization / International Electrotechnical Commission |
Energy Department |
|
10 CFR 430 Subpart B, App. R, 4.5.1 |
IES LM-16 |
1993 |
Practical Guide to Colorimetry of Light Sources
|
Illuminating Engineering Society of North America |
Occupational Safety and Health Administration |
|
29 CFR 1910.269 Appendix G |
ASTM F1742 |
2011 |
Standard Specification for PVC Insulating Sheeting
|
ASTM International |
Research and Special Programs Administration |
|
49 CFR 195.3(c) B16 |
API 2510 |
2001 |
Design and Construction of LPG Installations
|
American Petroleum Institute |
Food and Drug Administration |
|
21 CFR 177.1480(b)(2) |
FDA Publication |
1995 |
Infrared Spectrophotometric Determination of Polymers Extracted from Borex 210 Resin Pellets
|
Food and Drug Administration, U.S. Department of Health and Human Services |
Environmental Protection Agency |
|
40 CFR 282.98(d)(1)(i)(A) |
WVUSTP |
1997 |
West Virginia Statutory Requirements Applicable to the Underground Storage Tank Program
|
State of West Virginia |