This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | ASTM D 511A | 1993 | Calcium by EDTA Titration | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7460 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(8) | API RP 2FPS | 2001 | RP for Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(i) | ASTM C 177 | 2004 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded Hot-Plate Apparatus | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.164 | ANSI/NFPA 71 | 2014 | Central Station Signaling Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 113.30-25(j)(2) | IEC 60331-21 | 1999 | Tests for Electric Cables Under Fire Conditions—Circuit Integrity—Part 21: Procedures and Requirements—Cables of Rated Voltage up to and Including 0.6/1.0kV, First Edition | International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.274(f)(1)(v) | ISO 4126-1 | 1991 | Safety Valves | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(vi) | EPA Method 1330A | 1992 | Extraction Procedure for Oily Wastes (and in Basic Manual I) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.11(b) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 53.01-1(b)(2) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | AOAC Method 993.30 | 1998 | Ortho-phosphate (as P), mg/L | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(iv) | ANSI Z41 | 1999 | Protective Footwear | American National Standards Institute | |
Food and Drug Administration | 21 CFR 177.1550(d)(3) | ASTM D 1457 | 1956 | Test for Thermal Instability Index of Tetrafluoroethylene Homopolymer | ASTM International | |
Coast Guard | 46 CFR 160.076-11(b)(1) | UL 1123 | 2008 | Marine Buoyant Devices, Seventh Edition including revisions through February 14, 2011 | Underwriters Laboratories, Inc. | |
Public Health Service | 42 CFR 37.43 | NCRP Report No. 33 | 1968 | Medical X-ray and Gamma-Ray Protection for Energies Up to 10 MeV--Equipment Design and Use | National Council on Radiation Protection and Measurement | |
Rural Utilities Service | 7 CFR 1755.522(a)(12) | RUS Bulletin 345-87, PE-87 | 1983 | RUS Specification for Terminating (TIP) Cable | Rural Utilities Service, U.S. Department of Agriculture | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets | ASTM International | |
Coast Guard | 40 CFR 60.564(j)(1)(i) | ASTM D 3370 | 1996 | Standard Practices for Sampling Water | ASTM International | |
Energy Department | 10 CFR 431.102, R-value | ASTM C 177 | 1997 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Coast Guard | 46 CFR 160.151-21(e) | ISO 17339:2002(E) | 2002 | Ships and marine technology—Sea anchors for survival craft and rescue boats, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 1043.95(d) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 14.4.2 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 630 | 1993 | Dithiocarbamate Pesticides by UV-VIS Spectrophotometer | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.7(d)(3) | ASME MFC-5M | 1994 | Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 73 App. B, I B 1 b 2 a | ANSI S3.6 | 1973 | Specifications for Audiometers | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.411 | ASME B&PV Code | 2013 | Boiler and Pressure Vessel Code, Sections I-VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(d)(1) | AAI-RMA Specification | 2013 | Specifications for Anhydrous Ammonia Hose | Agriculture Ammonia Institute-Rubber Manufacturers Association | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.3M | 1987 | Stainless Steel Plumbing Fixtures (Designed for Residential Use) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Ethanol) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.950(a)(4)(iii) | LAUIC regulations | 1979 | Second Supplement to Statewide Order No. 29-M (June 8, 1979) | State of Louisiana | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 4, (2)(c) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 431.102, R-value | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Coast Guard | 46 CFR 160.151-21(f) | ISO 18813:2006(E) | 2006 | Ships and marine technology—Survival equipment for survival craft and rescue boats, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 1045.810 Table 1 | SAE J-1939 | 2008 | Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 630.1 | 1993 | Dithiocarbamate Pesticides by GC/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.7(d)(4) | ASME MFC-6M | 1998 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 73 App. B, I B b 2 a | ISO 389 | 1975 | Standard Reference Zero for the Calibration of Puretone Audiometer | International Organization for Standardization | |
Mine Safety and Health Administration | 30 CFR 77.503-1 | NFPA 70 | 1968 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (2) | USGS I-1030-85 | 1985 | Techniques of Water Resources Investigation of the U.S. Geological Survey, Book 5, Chapter A-I, 3rd Edition | U.S. Geological Survey | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/BHMA A156.2 | 1989 | Standard for Bored and Preassembled Locks and Latches | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Ethanol) | EPA Method 1671 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Gas Chromatography/ Flame Ionization Detector | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2250(a)(2) | UTUIC regulations | 1990 | Underground Injection Control Regulations; Utah Administrative Code, Section R448-7 (effective as of January 2, 1990) | State of Utah | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 4, (2)(e) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 52.742(a)(8) | ASTM E 180 | 1985 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals | ASTM International | |
Coast Guard | 21 CFR 109.30(d) | FDA Publication | 1983 | Test Procedures for Determination of PCB Permeability of Food Packaging, Inner-Wraps | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 40 CFR 444.12(b)(1) Table (7) | ASTM D 3223 | 1991 | Standard Test Method for Total Mercury in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 761.19(a)(13) | ASTM D 2784 | 1989 | Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(v) | NFPA 1983 | 2001 | Standard on Fire Service Life Safety Rope and System Components | National Fire Protection Association | |
Coast Guard | 46 CFR 121.240(c)(2) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council |