This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63.14(g)(93) | ASTM E711 | 1987 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. P, 4.2 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.180(a)(2)(xiii) | Drawing No. 175-8000 | 2009 | Neoprene Body Suit | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(4)(ii) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry. Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.14 Note 2 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Recommended Service Procedure, Application | SAE J-1990 | 1991 | Extraction and Recycle Equipment for Mobile Automotive Air-Conditioning Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 272.501(b)(1) | FLHWMP | 1997 | Florida Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Florida | |
Rural Utilities Service | 7 CFR 1755.870(b)(5)(i) | ASTM D1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
Coast Guard | 46 CFR 160.077-5(b) | Federal Standard 751 | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(3)(i) | EPA-600-4-79-020 | 1983 | Method 210.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 170.270(c)(2) | ASTM F1197 | 1994 | Standard Specification for Sliding Watertight Door Control Systems1 | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. O, 2.1.2 | UL 729 | 1976 | Oil-Fired Floor Furnaces | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.077-19(c)(3)(iii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D178 | 2001 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Environmental Protection Agency | 40 CFR 60.251(d)(1) Coal | ASTM D388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Rural Utilities Service | 7 CFR 1755.902(l)(4)(iii) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Public Health Service | 42 CFR 37.42(h)(1) | AAPM Report No. 74 | 2002 | Quality Control in Diagnostic Radiology, Report of Task Group 12, Diagnostic X-Ray Imaging Committee | American Association of Physicists in Medicine | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Shoulder room dimension | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (49) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1750(a)(2) | NDUIC regulations | 1987 | North Dakota Administrative Code, Chapter 43-02-05 (Underground Injection Control, as published in Statutes and Rules for the Conservation of Oil and Gas, North Dakota Industrial Commission | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63.9020(e)(4) | ASTM E224 | 2008 | Standard Test Methods for Analysis of Hydrochloric Acid | ASTM International | |
Environmental Protection Agency | 40 CFR 160.151-57 | OIA Method PAI-DK02 | 1994 | Nitrogen Kjeldahl, (Block Digestion, Steam Distillation, Colorimetric Detection) | OI Analytical | |
Coast Guard | 40 CFR 136.3(a) Table IB (18) | APHA Method 3111 C | 1999 | Metals by Flame Atomic Absorption, Extraction and Direct Aspiration | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D1051 | 2008 | Standard Specification for Rubber Insulating Sleeves | ASTM International | |
Coast Guard | 46 CFR 160.026-1(a)(2) | USPHS Publication 956 | 1965 | Drinking Water Standards | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5320-6B | 1974 | Airport Pavement Design and Evaluation (Through Change 1, 1974) | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.57(h)(1)(ii) | NFPA 33 | 1969 | Spray Finishing Using Flammable and Combustible Materials | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (55) | EPA Method 609 | 1982 | Nitroaromatics and Isophrone by GC/ECD/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (bromomethane) | EPA Method 524.3 | 2009 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.485a(d)(1) | ASTM E168 | 1967 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 111.25-5(a) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Pipeline and Hazardous Materials Safety Administration | 40 CFR 136.3(a) Table IB Footnote 55 | EPA-821-B-01-009 | 2001 | Kelada-01, Kelada Automated Test Methods for Total Cyanide, Acid Dissociable Cyanide, and Thiocyanate, Revision 1.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 92.113 Table B113-2 | ASTM D1945 | 1991 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.516 | NFPA 70 | 2013 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.060-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.6 | ASTM D1481 | 1993 | Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer | ASTM International | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(x) | ASTM C1374 | 2003 | Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation | ASTM International | |
Coast Guard | 46 CFR 183.320(d) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (45) | EPA Method 252.2 | 1978 | Osmium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | ASTM D3223 | 2002 | Standard Test Method for Total Mercury in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix F, Procedure 3, 16.2 | ASTM D6216 | 2012 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Research and Special Programs Administration | 45 CFR 162.1203(a)(6) | CAQH Publication | 2011 | Phase I CORE 157: Eligibility and Benefits System Availability Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 40 CFR 136.3(a) Table ID (1) | ASTM D5812 | 2002 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography | ASTM International | |
Coast Guard | 49 CFR 571.209 S5.2(a) | ASTM B117 | 1979 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 89.207(b) | ASTM E29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Rural Utilities Service | 7 CFR 1728.202(b)(5) | RUS Bulletin 1728F-700 | 1993 | RUS Specification for Wood Poles, Stubs and Anchor Logs | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.135-7(b)(1)(ii) | ASTM F1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
Environmental Protection Agency | 40 CFR 1045.110(g) | SAE J-1939 | 2008 | Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 633 | 1993 | Organonitrogen Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (10) | EPA Method 283.2 | 1978 | Titanium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency |