This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 27 CFR 21.65(a) | National Formulary | 1980 | Formula No. 38-B | U.S. Pharmacopeial Convention | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.1 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178, Appendix A, Table 1 Note 2 | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Minerals Management Service | 30 CFR 250.1202(a)(2)(viii) | API MPMS | 2013 | Chapter 21, Addendum to Section 2 | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.156 | ANSI/NFPA 1972 | 1972 | Standard on Helmets for Structural Fire Fighting | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 179.200-7(c) Table | ASTM B 209 | 1993 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(19) | ASME B16.28 | 1994 | Wrought Steel Buttwelding Short Radius Elbows and Returns | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.14(g)(17) | ASTM D 2013/D 2013M | 2009 | Standard Practice for Preparing Coal Samples for Analysis | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(19) | ASTM C 595 | 2008 | Blended Hydraulic Cements | ASTM International | |
Coast Guard | 46 CFR 164.008-3(c)(3) | ASTM E 119 | 1998 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Chloride) | ASTM D 512B | 1999 | Chloride by Argentometric Titration | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(6)(ii) | ASTM D 2197 | 1991 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(42) | ASTM D 396 | 1998 | Standard Specification for Fuel Oils | ASTM International | |
Food and Drug Administration | 21 CFR 173.370(c) | Ecolab Publication | 2001 | Determination of 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) Peroxyacid/Peroxide-Containing Solutions | Ecolab Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(5)(iii) | 42 CFR 84 | 2014 | Approval of Respiratory Devices | U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.060-3(c) | Federal Standard 191 | 1978 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (iii) | Drawing No. 420-3000 | 2011 | Upper Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Methoxychlor) | EPA Method 508.1 | 1995 | Determination of Chlorinated Pesticides, Herbicides, and Organohalides by Liquid-Solid Extraction and Electron Capture Gas Chromatography | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.104a(i)(4) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 6.0 (3) | EPA-240-B-01-003 | 2001 | EPA Requirements for Quality Assurance Project Plans for Environmental Data Operations, EPA QA/R-5 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.606(c)(3)(ii)(G) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method C—Spectrophotometric Method | Association of Florida Phosphate Chemists | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.161 | ANSI/NFPA 17 | 2014 | Dry Chemical Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.2 | ASTM D 4891 | 1989 | Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.155(i) | SAE J-211/1 | 1995 | Instrumentation for Impact Tests—Part 1—Electronic Instrumentation | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(n)(1) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 175.600(b) Table | MIL-R-21607E(SH) | 1990 | Resins, Polyester, Low Pressure Laminating, Fire Retardant | U.S. Department of Defense | |
Energy Department | 10 CFR 434.701.1 RS-5 | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (RS-5) | ASTM International | |
Public Health Service | 42 CFR 37.42(h)(1) | AAPM Report No. 14 | 1985 | X-Ray Generators and Automatic Exposure Control Devices, Report of the Diagnostic X-Ray Imaging Committee Task Group on Performance Specifications and Acceptance Testing for X-Ray Generators and Automatic Exposure Control Devices | American Association of Physicists in Medicine | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(22) | ASTM D 4329 | 1999 | Standard Practice for Fluorescent UV Exposure of Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (32) | USGS O-2002-01 | 2001 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides and Selected Degradates in Water by C-18 Solid-Phase Extraction and GC/MS | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (6) Beryllium | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-Cl H | 2000 | Chlorine, Syringaldazine (FACTS) | American Public Health Association | |
Coast Guard | 40 CFR 60.251(c) Bituminous coal | ASTM D 388 | 1990 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(197) | ASTM E 260 | 1973 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(4) | ANSI/NSC Z41 | 1999 | Protective Footwear | National Safety Council | |
Occupational Safety and Health Administration | 29 CFR 1926.6(l)(2) | ASME B30.5 | 2004 | Mobile and Locomotive Cranes, | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (32) | EPA Method 610 (HPLC) | 1982 | Polynuclear Hydrocarbons by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(i)(F) | EPA Method 353.2 | 1993 | Determination of Nitrate-Nitrite Automated Colorimetry. Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(o) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.580(b)(2) | ASTM D 2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Food and Drug Administration | 21 CFR 177.1820(c)(3) | FDA Publication | 1989 | Determination of Residual Maleic Anhydride in Polymers by Gas Chromatography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 147.2800(a)(5) | NMIUIC regulations | 1984 | CNMI Coastal Resources Management Regulations, Commonwealth Register, Volume 6, Number 12, December 17, 1984 | Commonwealth of the Northern Mariana Islands | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3299 | 2010 | Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks | ASTM International | |
Federal Aviation Administration | 14 CFR 29.613(d)(4) | MIL-HDBK-23 | 1988 | Structural Sandwich Composites | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.102(a) | CGA G-1 | 2009 | Acetylene | Compressed Gas Association | |
National Archives and Records Administration | 36 CFR 1238.14(b) | ISO 18901 | 2002 | Imaging Materials--Processed Silver-gelatin Type Black-and-White Films--Specifications for Stability | International Organization for Standardization | |
Coast Guard | 7 CFR 1755.504(d) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 3280.405(e)(1) | ANSI Z34.1 | 1993 | Certification, Third-Party Certification Program | American National Standards Institute | |
Minerals Management Service | 30 CFR 817.49(a)(6)(i) | USDA Technical Release 210-VI-TR60 | 1985 | Earth Dams and Reservoirs | Soil Conservation Service, U.S. Department of Agriculture |