This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.17(g)(106) | ASTM D 2622 | 2005 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
National Highway Traffic Safety Administration | 21 CFR 178.3770(b)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI B31.1.0 | 1967 | Code for Pressure Piping | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.3151(b) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(23) | API MPMS | 2007 | Chapter 6, Section 7 | American Petroleum Institute | |
Coast Guard | 46 CFR 131.950(a)(1) | IMO SOLAS | 1992 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.123(c)(2) | Drawing No. 127-1016 | 1994 | Neck cable | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.131(d)(4)(i) | APHA Method 5310 D | 2000 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(j)(2) | CAARB Vapor Recovery Test Procedure TP-201.1 | 1996 | Volumetric Efficiency for Phase I Vapor Recovery Systems, amended February 1, 2001 and October 8, 2003 | California Air Resources Board | |
Coast Guard | 46 CFR 182.130 | ABYC P-4 | 1989 | Marine Inboard Engines | American Boat and Yacht Council | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/NWWDA I.S. 1 | 1987 | Industry Standard for Wood Flush Doors | National Wood Window and Door Association | |
Coast Guard | 46 CFR 182.430(k) | ABYC P-1 | 1993 | Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i) | 29 CFR 1910.107(b)(6) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | U.S. Department of Labor | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(1) Note (1) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.485(g)(6) | ASTM D 4809 | 1995 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
Food and Drug Administration | 21 CFR 184.1583(b) | Food Chemicals Codex | 1981 | Pancreatin | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1301(b) | Food Chemicals Codex | 1981 | Ferric Phosphate | National Academy Press | |
Federal Highway Administration | 23 CFR 772.9(a) | FHWA-PD-96-010 | 2004 | Traffic Noise Model, including Revision No. 1 | Federal Highway Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (113) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 515.4 | 2000 | Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Microextraction, Derivitization, and Fast Gas Chromatography with Electron Capture Detection, Revision 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Subbituminous coal | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 63.8450(e)(10) | EPA-454/R-98-015 | 1997 | Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 165.110(b)(2)(ii) | AOAC Official Methods | 2005 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 39.2009(a)(2)(ix) | IEC 60309-2 | 2012 | Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 2: Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, Edition 4.2 2012-05 | International Electrotechnical Commission | |
Research and Special Programs Administration | 24 CFR 200.926a(c)(5) | ASCE 7 | 1995 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1002(j)(1) | SAE J-333a | 1970 | Operation Protection for Wheel-Type Agricultural and Industry Tractors | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (72) | APHA Method 3111 D | 1999 | Metals by Flame Atomic Absorption, Nitrous Oxide | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Rural Utilities Service | 7 CFR 1755.860(m)(9)(i) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. F, 3.2.2 | IEC 62301 | 2005 | Household electrical appliances—Measurement of standby power | International Electrotechnical Commission | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(1)(ii) | EPA Method 200.8 | 1991 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 197.328(a) | ASME PVHO-1 | 2000 | Safety Standard for Pressure Vessels for Human Occupancy | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xliii) | ASTM D 3645 | 2008 | Standard Test Methods for Beryllium in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C1 | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Coast Guard | 46 CFR 116.405(f) | UL 723 | 1993 | Surface Burning Characteristics of Building Materials | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 57.02-2(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.1208(b)(5)(ii)(A) | ASTM D 6735 | 2001 | Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(40) | ANSI K13.1 | 1967 | Identification of Gas Mask Containers | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. M, 1.12 | ASHRAE 116 | 2005 | Methods for Testing for Rating for Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.176-9(d) | Federal Standard 751A | 1965 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Azinphos Methyl) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart NN | PAHWMP | 2014 | Commonwealth of Pennsylvania Hazardous Waste Management Program (Reserved) | Commonwealth of Pennsylvania | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API Bulletin 2509 B | 1992 | Shop Testing of Automatic Liquid Level Gages | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 52.741(q)(1)(vi)(B) | 35 I.A.C. 215 | 1989 | Administrative Code, Section 215(a)(2) | State of Illinois | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-397a | 1967 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Coast Guard | 46 CFR 54.30-3(c) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.146(i) | Drawing No. 210-4522 | 1994 | No title given | Reprographic Technologies | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(7) | Drawing No. 96-SIDH3-001 | 1996 | Head-Neck Bracket | Reprographic Technologies | |
Coast Guard | 40 CFR 444.12(b)(1) Table (5) | USGS I-1586-85 | 1985 | pH, Electrometric | U.S. Geological Survey |