| Environmental Protection Agency |
|
40 CFR 80.580(b)(2) |
ASTM D2622 |
2010 |
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
|
ASTM International |
| Research and Special Programs Administration |
|
49 CFR 173.302b(b) |
UN Publication |
2005 |
UN Recommendations on the Transport of Dangerous Goods
|
United Nations |
| Coast Guard |
|
33 CFR 142.39(c) |
ANSI Z88.2 |
1980 |
Respiratory Protection
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 52.741(u)(1)(i) |
35 I.A.C. 215, Subpart V |
1989 |
Administrative Code
|
State of Illinois |
| Rural Utilities Service |
|
7 CFR 1755.890(j)(2) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
| Environmental Protection Agency |
|
40 CFR 60.111(i) |
API 2517 |
1980 |
Evaporation Loss From External Floating-Roof Tanks
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1918.3(b)(8) |
ANSI/ASSE Z87.1 |
1989 |
Practice for Occupational and Educational Eye and Face Protection
|
American Society of Safety Engineers |
| Coast Guard |
|
46 CFR 160.055-5(c)(1) |
Drawing No. 160.055-1B, Sheet 4 |
2012 |
Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 67
|
U.S. Coast Guard |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(a)(5) |
Drawing No. SA-572-S50 |
1994 |
Chest deflection transducer
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Occupational Safety and Health Administration |
|
29 CFR 1910.266 Appendix C Table |
SAE J-386 |
1969 |
Operator Restraint Systems for Off-Road Work Machines
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 63.99(a)(8)(iv) |
DE State Regulations |
2000 |
Regulations Governing the Control of Air Pollution, Regulation 38, Subpart N
|
State of Delaware |
| Energy Department |
|
10 CFR 431.15(b)(1)(i) |
NEMA MG-1 |
1993 |
Motors and Generators, Section I, Part 1
|
National Electrical Manufacturers Association |
| Consumer Product Safety Commission |
|
16 CFR 1616.5(a)(9) Footnote 3 |
ASTM D2654 |
1971 |
Method of Test for Amount of Moisture in Textile Materials
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(6) |
SAE J-227a |
1976 |
Electric Vehicle Test Procedure
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (40) |
3M Test Method 0222 |
1994 |
Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk
|
3M Corporation |
| Environmental Protection Agency |
|
40 CFR 147, Subpart BB, Appendix A(b) |
MTUIC regulations |
1996 |
Administrative Rules of Montana Board of Oil and Gas Conservation, Chapter 22
|
State of Montana |
| Environmental Protection Agency |
|
40 CFR 63.5719(c)(4)(i) |
ASTM D6420 |
1999 |
Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
|
ASTM International |
| Food and Drug Administration |
|
21 CFR 163.5(a) |
AOAC Official Methods |
1975 |
Official Methods of Analysis
|
AOAC International |
| Coast Guard |
|
40 CFR 136.3(a) Table IA |
EPA Method 2002.0 |
2002 |
Methods for Measuring Acute Toxicity to Freshwater and Marine Organisms, Ceriodaphnia dubia acute
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (43) |
EPA Method 1624 B |
1990 |
Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
APHA Method 7500-Ra D |
2011 |
Radium - Sequential Precipitation Method
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 60.4415(a)(1)(ii) |
ASTM D1072 |
1990 |
Standard Test Method for Total Sulfur in Fuel Gases
|
ASTM International |
| Energy Department |
|
10 CFR 430 Subpart B, App. M, 3, 3.1.1 |
ASHRAE 37 |
2005 |
Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
WQA S-400 |
1986 |
Point-of-Use Distillation Drinking Water Systems
|
Water Quality Association |
| National Highway Traffic Safety Administration |
|
49 CFR 571.104 S3 Overall width |
SAE Publication |
1963 |
SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 54.25-10(b) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda)
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(r)(1) |
WCLIB No. 16 |
1984 |
West Coast Lumber Standard Grading Rules, pages 5-21, 90 and 91
|
West Coast Lumber Inspection Bureau |
| National Highway Traffic Safety Administration |
|
49 CFR 572.143(a) |
Drawing No. TE-250-021 |
1987 |
Neck Mounting Plate
|
Reprographic Technologies |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(l)(4) |
ASME B30.14 |
2004 |
Side Boom Tractors
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.109(j)(2)(ii) |
49 CFR 172 |
2014 |
Flammable Solids
|
U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 90.7(b)(1) Table |
ASTM D1319 |
1989 |
Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.100(b)(1) |
Drawing No. 92041-004 |
1992 |
Skull Cap Plate
|
Reprographic Technologies |
| Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(a) |
ASTM A395/A 395M |
1998 |
Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.324(d)(1) |
ASTM D4891 |
2006 |
Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
|
ASTM International |
| Alcohol, Tobacco, Firearms, and Explosives Bureau |
|
27 CFR 21.6(b) |
Annual Book of Standards |
1980 |
Annual Book of ASTM Standards, Parts 23, 25, and 29
|
ASTM International |
| Coast Guard |
|
46 CFR 171.050(c) |
IMO Resolution MSC 267(85) |
2008 |
Adoption of the International Code on Intact Stability, 2008 (2008 IS Code)
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (40) |
APHA Method 4500-NO3 E |
2000 |
Nitrate Nitrogen by Selective Electrode
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (13) Fluoride |
APHA Method 4110 B |
1998 |
Anions by Ion Chromatography with Chemical Suppression of Eluent
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 7041 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Housing and Urban Development Department |
|
24 CFR 3280.304(b)(1) |
ASCE 19 |
1996 |
Manual for Structural Applications of Steel Cables for Buildings
|
American Iron and Steel Institute |
| Mine Safety and Health Administration |
|
30 CFR 71.402(b) |
ANSI A40.8 |
1955 |
National Plumbing Code
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 56.60-1(b) Table 56.60-1(b) |
MSS SP-55 |
2001 |
Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components
|
Manufacturers Standardization Society of the Valve and Fittings Industry |
| Environmental Protection Agency |
|
40 CFR 1037.520(c)(1) |
ISO 28580:2009(E) |
2009 |
Passenger car, truck and bus tyres—Methods of measuring rolling resistance—Single point test and correlation of measurement results
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(7)(iii)(B) |
EPA Method 1667 |
1998 |
Formaldehyde, Isobutyraldehyde, and Furfural by Derivatization Followed by High Performance Liquid Chromatography
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (3) |
APHA Method 3111 C |
1999 |
Metals by Flame Atomic Absorption, Extraction and Direct Aspiration
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(2) |
ASME MFC-4M |
1997 |
Measurement of Gas Flow by Turbine Meters
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
49 CFR 178.337-1(a)(2) |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 147.2550(a)(1) |
WYUIC regulations |
1977 |
Wyoming Environmental Quality Act, Wyoming Statutes sections 35-11-101 through 35-11-115, and 35-11-301 through 35-11-305 (1977 Republished Edition and 1989 Cumm. Supp.)
|
State of Wyoming |
| Rural Utilities Service |
|
7 CFR 1755.902(b)(8) |
ICEA S-87-640 |
2006 |
Standard for Optical Fiber Outside Plant Communications Cable, 4th edition
|
Insulated Cable Engineers Association |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.925(b)(1) |
ASME B31.8S |
2004 |
Managing System Integrity of Gas Pipelines
|
American Society of Mechanical Engineers |