This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.6 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM A 505 | 1987 | Standard Specification for General Requirements for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled | ASTM International | |
Rural Utilities Service | 7 CFR 1728.97(a)(1) | RUS Bulletin 50–4 (D–801) | 1986 | Specification and Drawings for 34.5/19.9 kV Distribution Line Construction (11–86). | Rural Utilities Service, U.S. Department of Agriculture | |
Research and Special Programs Administration | 49 CFR 179.100-10(c) | ASTM A 240/A 240M | 1994 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 111.60-13(a) | UL 62 | 1997 | Flexible Cord and Fixture Wire | Underwriters Laboratories, Inc. | |
Veterans Affairs Department | 38 CFR 39.63 | IAPMO Publication | 2003 | Uniform Plumbing Code | International Association of Plumbing and Mechanical Officials | |
Environmental Protection Agency | 40 CFR 91.6(b)(1) Table | ASTM D 2699 | 1992 | Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(3)(iii)(B) | ASME OM Code | 2004 | Code for Operation and Maintenance of Nuclear Power Plants | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 60 | 1970 | Field Glued Plywood and Wood Frame Structural Floor Systems | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 5.5.2 | ASTM D 3588 | 1998 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (17) | APHA Method 6640 B | 2001 | Chlorinated Phenoxy Herbicides by Liquid-Liquid and GC/ECD | American Public Health Association | |
Food and Drug Administration | 21 CFR 168.122(d)(3) | AOAC Official Methods | 1984 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 141.852(c)(1)(ii)(F) | APHA Method 9221 | 2005 | Multiple Tube Fermentation Technique for Members of the Coliform Group, F.1, Escherichia coli Procedure: EC-MUG medium | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(a) | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 1995 EPA/AP | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.123(b) | Drawing No. 127-1000 | 1987 | Head Assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 75.6(a)(34) | ASTM D 4177 | 2000 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Coast Guard | 46 CFR 56.01-2(k)(6) | MSS SP-51 | 2003 | Class 150LW Corrosion Resistant Cast Flanges and Flanged Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA-600-R-92-129 | 1992 | Methods for the Determination of Organic Compounds in Drinking Water—Supplement II | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (11) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Energy Department | 10 CFR 434.402.2.1 Table 402.2.1 | NWWDA 101/I.S. 2 | 1997 | Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors (RS-11) | National Wood Window and Door Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Dalapon) | EPA Method 515.1 | 1995 | Chlorinated acids Liquid/Liquid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.593(b)(2) | ASTM E 260 | 1996 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Federal Highway Administration | 23 CFR 630.1002 Footnote 1 | DOT Publication | 2009 | Manual on Uniform Traffic Control Devices (MUTCD), Part 6 | Federal Highway Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 94.5(a)(9) | ASTM D 5186 | 1999 | Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASSE 1008 | 1986 | Performance Requirements for Household Food Waste Disposer Units | American Society of Sanitary Engineering | |
Federal Aviation Administration | 14 CFR 34.1 Characteristic level | ICAO Annex 16 | 2008 | Environmental Protection, Appendix 6 | International Civil Aviation Organization | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(14) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 300.915(a)(9)(iv) | ASTM D 1298 | 1990 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | ASTM International | |
Coast Guard | 46 CFR 8.110(b) | ABS Publication | 1997 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(c) | SAE J-2261 | 2002 | Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 52.741(a)(4)(i)(B)(3)(iv) | ASTM D 4017 | 1987 | Standard Test Method for Water in Paints and Paint Materials by the Karl Fischer Titration Method | ASTM International | |
Health and Human Services Department | 45 CFR 162.1102(a)(1) | NCPDP Publication | 2000 | Batch Standard Batch Implementation Guide, Version 1, Release 1 | National Council for Prescription Drug Programs | |
Food and Drug Administration | 21 CFR 184.1979(b)(2) | Food Chemicals Codex | 1996 | Whey | National Academy Press | |
Mine Safety and Health Administration | 30 CFR 75.333(e)(3) | ASTM E 162 | 1987 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. P, 4.3 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (25) | ASTM D 6508 | 2005 | Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I) | EPA-600-R-92-129 | 1992 | Methods for the Determination of Organic Compounds in Drinking Water-Supplement II | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) | Colitag Method | 2001 | Test for Detection and Identification of Coliforms and E. coli Bacteria in Drinking Water and Source Water as Required in National Primary Drinking Water Regulations | CPI International | |
Environmental Protection Agency | 40 CFR 799.9120(f)(6) | OECD No. 423 | 1996 | Guidelines for Testing of Chemicals, Acute Oral Toxicity—Acute Toxic Class Method | Organization for Economic Cooperation and Development | |
Coast Guard | 46 CFR 184.240(d) | ABYC A-22 | 1993 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Occupational Safety and Health Administration | 29 CFR 1910.217(b)(12) | ASME B&PV Code | 1968 | Code for Pressure Vessels | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.176(b) | Drawing No. 420-5121 | 2011 | Structural replacement | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.917(b) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (1) | APHA Method 9222 D | 1997 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1650 (16.1) | EPA Method 450.1 | 1981 | Total Organic Halide | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.171-9(h) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(1)(i) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Energy Department | 10 CFR 431.96 (d) | AHRI 1230-2010 | 2010 | 2010 Standard for Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Conditioning and Heat Pump Equipment | Air Conditioning, Heating, and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 52, Subpart FFF | NMISIP | 1979 | Territory Implementation Plan with Regulatory and Nonregulatory Revisions | Commonwealth of the Northern Mariana Islands | |
Rural Utilities Service | 7 CFR 1755.890(b)(4) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association |