This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 29 CFR 1915.153(b)(2) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-15(e) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.41(h)(2) | IMO Publication | 2008 | NOX Technical Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(Z) | EPA Method 1660 | 1993 | Pyrethrins and Pyrethroids by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1728.201(f)(2) | ANSI O5.2 | 2006 | Standard for Wood Products, Structural Glued Laminated Timber for Utility Structures | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | AGA Report No. 7 | 1996 | Section 8, Calibration, Measurement of Gas Flow by Turbine Meters | American Gas Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 220.2 | 1978 | Copper (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(23) | SAE J-2284-3 | 2001 | High Speed CAN (HSC) for Vehicle Applications at 500 KBPS | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 10 CFR 52 App. C, III D | AP 600 | 1999 | Tier 1, Tier 2, and Generic Technical Specifications | Westinghouse Electric Company | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | ISO 3449 | 2013 | Earth-moving machinery -- Falling-object protective structures -- Laboratory tests and performance requirements | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.939(a)(3) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 177.1960(b)(1)(ii) | ASTM D 1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2201(a)(3) | TXUIC regulations | 1981 | Rules Having Statewide General Application to Oil, Gas, and Geothermal Resource Operations, sections .051.02.02.000 to .051.02.02.080 (Railroad Commission of Texas, Oil and Gas Division, Revised 12-22-81) | State of Texas | |
Environmental Protection Agency | 40 CFR 63.11162(f)(3)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 101.120(a)(1) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-2, Regulation 11 | International Maritime Organization | |
Coast Guard | 46 CFR 160.024-4(d)(4) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Research and Special Programs Administration | 49 CFR 180.413(b)(6) | CGA TB-2 | 1980 | Guidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks | Compressed Gas Association | |
Federal Aviation Administration | 27 CFR 30 Subpart E Note | BATF Publication 5110.6 | 1978 | Gauging Manual Embracing Instructions and Tables for Determining Quantity of Distilled Spirits by Proof and Weight | Bureau of Alcohol, Tobacco, Firearms and Explosives, U.S. Department of the Treasury | |
Coast Guard | 24 CFR 200, Appendix A | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 3280.405(e) | AAMA 1702.2 | 1995 | Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing | American Architectural Manufacturers Association | |
Food and Drug Administration | 21 CFR 184.1978(b) | Food Chemicals Codex | 1981 | Carnauba Wax | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 572.74(a) | Drawing No. SA 106C 001 | 1997 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 10, Revision C | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (n-Butyl-acetate) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Coast Guard | 33 CFR 154, Appendix A, 3.1 | ASTM F 722 | 1982 | Standard Specification for Welded Joints for Shipboard Piping Systems | ASTM International | |
Coast Guard | 46 CFR 111.105-1 | IEC 60079-0 | 2000 | Electrical apparatus for Explosive Gas Atmospheres—Part 0: General Requirements (Edition 3.1) | International Electrotechnical Commission | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 408.1 | ASME A17.1 | 2000 | Safety Code for Elevators and Escalators, including ASME A17.1a-2002 Addenda and ASME A17.1b-2003 Addenda | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(27)(iv) | OIA Method PAI-DK03 | 1994 | Nitrogen, Total Kjeldahl, Block Digestion, Automated FIA Gas Diffusion | OI Analytical | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.459 | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (87) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Total Chlorine) | APHA Method 4500-Cl I | 2000 | Chlorine, Iodometric Electrode | American Public Health Association | |
Coast Guard | 40 CFR 136.3(a) Table IF (Benzene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Minerals Management Service | 30 CFR 250.802(e)(3) | API RP 14E | 2000 | Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 61, Appendix D, Purpose and Background | EPA-520-1-89-002 | 1989 | A Guide for Determining Compliance with the Clean Air Act Standards for Radionuclides Emissions from NRC-Licensed and Non-DOE Federal Facilities | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 60.335(a)(5) | EPA Method 20 | 1986 | Source Assessment Sampling System (SASS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (22) Selenium | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.251(d)(2) Coal | ASTM D 388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Energy Department | 10 CFR 431.12, General purpose motor (1) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(a)(3) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10297 | 1999 | Gas cylinders--Refillable gas cylinder valves--Specification and type testing | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(4) | ANSI A11.1 | 1965 | Practice for Industrial Lighting | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.926(d)(1)(i)(C)(1) | CABO 1 & 2 Family Code | 1992 | One and Two Family Dwelling Code with Errata Package and 1993 Amendments | Council of American Building Officials | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (61) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vi)(C) | ASTM A 525 | 1991 | Standard Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1049 | 1998 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Environmental Protection Agency | 40 CFR 79.61(c)(3)(ii)(A)(4) | HHS Publication | 1985 | Guide for the Care and Use of Laboratory Animals | U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 89, Subpart D, Appendix D, Table 4 | ASTM D 613 | 1995 | Standard Test Method for Cetane Number of Diesel Fuel Oil | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.508(a) | ASHRAE Handbook | 1997 | Fundamentals | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.156-5(e)(1) | ISO 527-1:1993(E) | 1993 | Plastics—Determination of tensile properties, Part 1: General Principles, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 131.44(b)(1) | Florida Statute, Title 28, Section 373.4592 | 2008 | Everglades improvement and management | State of Florida |