Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Standards Incorporated by Reference (SIBR) Database

Download PDF

If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.

SUBSCRIBE

Accessing Standards Incorporated by Reference

This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).

More information

Displaying 23501 - 23550 of 27353
Incorporated by (Agency) FR Citation Sort ascending CFR Citation Document Number Document Edition / Year Title of Standard Standard Publishing Organization
Food and Drug Administration 21 CFR 165.110(b)(4)(iii)(E)(1)(iv) ASTM D 3697 1992 Standard Test Method for Antimony in Water ASTM International
Coast Guard 46 CFR 56.01-2(e)(55) ASTM B 134 1996 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) ASTM International
National Highway Traffic Safety Administration 49 CFR 572.146(f) Drawing No. SA-572-S50 1994 Chest Deflection Transducer Reprographic Technologies
Environmental Protection Agency 40 CFR 136.3(a) Table IG (Fensulfothion) EPA Method 1657 1993 The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 272.1751(c)(1)(i) NDHWMP 2006 EPA Approved North Dakota Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program State of North Dakota
Energy Department 10 CFR 430.2, Definitions, R20 incandescent reflector lamp ANSI C79.1 1994 Nomenclature for Glass Bulbs Intended for Use with Electric Lamps American National Standards Institute
Coast Guard 34 CFR 668.148(a)(1)(iv) AERA Publication 1999 Testing Individuals of Diverse Linguistic Backgrounds, section of the Standards for Educational and Psychological Testing American Educational Research Association
Housing and Urban Development Department 24 CFR 3285.202(c) Table ASTM D 1586 1999 Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils ASTM International
Food and Drug Administration 21 CFR 175.250(b)(3) ASTM E 131 1981 Standard Definitions of Terms and Symbols Relative to Molecular-Spectroscopy ASTM International
Research and Special Programs Administration 49 CFR 179.400-5(a) ASTM A 240/A 240M 1999 Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels ASTM International
Environmental Protection Agency 40 CFR 136.3(a) Table IC (54) EPA Method 609 1982 Nitroaromatics and Isophrone by GC/ECD/FID U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 63.14(d)(3) API MPMS 1997 Evaporative Loss From Floating-Roof Tanks, First Edition, Chapter 19.2 American Petroleum Institute
Coast Guard 33 CFR 101.310(a) IMO Conference Resolution 1 2002 SOLAS Chapter XI-2, Regulation 6 International Maritime Organization
Coast Guard 46 CFR 160.051-7(l) IMO Revised recommendation on testing 2010 Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 International Maritime Organization
Environmental Protection Agency 40 CFR 63, Subpart DDDDD, Table 6, 2(e) ASTM D 95 2005 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation ASTM International
Agricultural Marketing Service 7 CFR 28.303(c) ASTM D 1440 1982 Standard Test Method for Length and Length Distribution of Cotton Fiber (Array Method) ASTM International
Pipeline and Hazardous Materials Safety Administration 49 CFR 195.307(e) ASME B&PV Code 2005 Boiler and Pressure Vessel Code, Section VIII, Division 1 American Society of Mechanical Engineers
Occupational Safety and Health Administration 29 CFR 1910.6(l)(1) CMAA Specification 1B61 2013 Specification for Electric Overhead Traveling Cranes Crane Manufacturer's Association of America
Food and Drug Administration 21 CFR 184.1979(b)(1) AOAC Official Methods 1980 Official Methods of Analysis AOAC International
Federal Railroad Administration 49 CFR 234.275(d)(1) FHWA Publication 2000 Manual on Uniform Traffic Control Devices (MUTCD), 2000 Millennium Edition, including Errata #1 Federal Highway Administration, U.S. Department of Transportation
Environmental Protection Agency 40 CFR 136.3(a) Table ID (19) ASTM D 3086 1990 Test Method for Organochlorine Pesticides in Water ASTM International
Environmental Protection Agency 40 CFR 143.4(b) Table Note 4 APHA Standard Methods, 20th Edition 1998 Standard Methods for the Examination of Water and Wastewater. 20th Edition American Public Health Association
Environmental Protection Agency 40 CFR 60.105(b)(1)(iv) GPA 2377 1986 Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes Gas Processors Association
Coast Guard 29 CFR 1917.93(b)(1)(ii) ANSI/ISEA Z89.1 1997 Safety Requirements for Industrial Head Protection International Safety Equipment Association
Occupational Safety and Health Administration 29 CFR 1910.110(d)(2), Table H-31 ASME B&PV Code 1968 Boiler and Pressure Vessel Code, Section VIII American Society of Mechanical Engineers
Housing and Urban Development Department 24 CFR 200.949(a)(2) ISDSI 105 1980 Test Procedures and Acceptance Criteria for Physical Endurance for Steel Doors and Hardware Reinforcings Insulated Steel Door Institute
Environmental Protection Agency 40 CFR 136.3(a) Table IC (16) EPA Method 625 1982 Base/Neutrals and Acids by GC/MS U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 141.24(e)(1) Table (Endrin) EPA Method 508.1 1995 Determination of Chlorinated Pesticides, Herbicides, and Organohalides by Liquid-Solid Extraction and Electron Capture Gas Chromatography U.S. Environmental Protection Agency
Mine Safety and Health Administration 30 CFR 77.403-2 SAE J-320b 1970 Minimum Performance Criteria for Rollover Protective Structures for Prime Movers Society of Automotive Engineers
Housing and Urban Development Department 24 CFR 200, Appendix A ACI 533.1R 1969 Quality Standards and Tests for Precast Concrete Wall Panels American Concrete Institute
Federal Communications Commission 47 CFR 68.317(a) EIA-470-A 1987 Telephone Instruments with Loop Signaling Electronic Industries Association
Environmental Protection Agency 40 CFR 272.201(c)(1) ARHWMP 2007 Arkansas Statutes and Regulations for Approved State Hazardous Waste Management Programs State of Arkansas
Rural Utilities Service 7 CFR 1755.405(c)(6) IEEE 743 1984 Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits Institute of Electrical and Electronics Engineers
Coast Guard 46 CFR 108.655(e) IMO Resolution A.760(18) 1993 Symbols Related to Life-saving Appliances and Arrangements International Maritime Organization
Occupational Safety and Health Administration 29 CFR 1910.6(h)(17) ASTM D 93 1971 Test for Flash Point by Pensky Martens Closed Cup Tester ASTM International
Pipeline and Hazardous Materials Safety Administration 49 CFR 173.301b(c)(1) ISO 10297 1999 Gas cylinders--Refillable gas cylinder valves--Specification and type testing International Organization for Standardization
Food and Drug Administration 21 CFR 178.3910(a)(4)(i)(C) ASTM D 156 1982 Standard Method of Test for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) ASTM International
Food and Drug Administration 21 CFR 101.83(c)(2)(ii)(A)(2) UUSI Publication 2000 Determination of the Sterol Content in Margerines, Halvarines, Dressings, Fat Blends and Sterol Fatty Acid Ester Concentrates by Capillary Gas Chromatography Unilever United States, Inc.
Occupational Safety and Health Administration 29 CFR 1910.6(e)(51) ANSI Z9.2 1960 Fundamentals Governing the Design and Operation of Local Exhaust Systems American National Standards Institute
Housing and Urban Development Department 24 CFR 200.926(d)(1)(ii)(B)(2)(ii) CABO 1 & 2 Family Code 1992 One and Two Family Dwelling Code with Errata Package and 1993 Amendments Council of American Building Officials
Coast Guard 46 CFR 164.120-7, Table 164.120-7(c)(3)(i) ASTM D 2583 2007 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor ASTM International
Environmental Protection Agency 40 CFR 136.3(a) Table IB (30) ASTM D 1976 2007 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy ASTM International
Environmental Protection Agency 40 CFR 141.23(k)(1) Table (3) Arsenic EPA Method 200.8 1994 Metals by ICP-MS U.S. Environmental Protection Agency
Environmental Protection Agency 40 CFR 799.9539(b) OECD No. 474 1977 Guidelines for the Testing of Chemicals, Mammalian Erythrocyte Micronucleus Test Organization for Economic Cooperation and Development
Environmental Protection Agency 40 CFR 80.47(m)(4) ASTM D 6708 2013 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material ASTM International
Food and Drug Administration 21 CFR 173.25(b)(2)(ii)(B) FDA Publication 1998 Determination of 3-Dimethylaminopropylamine in Food Simulating Extracts of Ion Exchange Resins Food and Drug Administration, U.S. Department of Health and Human Services
Occupational Safety and Health Administration 29 CFR 1910 Subpart L Appendix E (1)(C) MIL-B-2885D 1975 Military Specification For Fireman's Boots amendment U.S. Department of Defense
Coast Guard 46 CFR 160.077-21(c)(3) UL 1517 2012 Hybrid Personal Flotation Devices Underwriters Laboratories, Inc.
National Highway Traffic Safety Administration 49 CFR 572.177(b)(3) Drawing No. 420-3800 2011 Shoulder assembly National Highway Traffic Safety Administration, U.S. Department of Transportation
Environmental Protection Agency 40 CFR 136.3(a) Table IH Footnote 3 EPA-600-8-78-017 1978 Microbiological Methods for Monitoring the Environment, Water, and Wastes U.S. Environmental Protection Agency

DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.

NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.