This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Food and Drug Administration | 21 CFR 178.3770(d)(3) | ASTM D1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(4) | ANSI A11.1 | 1965 | Practice for Industrial Lighting | American National Standards Institute | |
Coast Guard | 46 CFR 160.023-2(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.132-7(b)(1)(i) | ASTM A36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1203.9 | ISO 6220 | 1983 | Draft Standard for Headforms for Use in the Testing of Protective Helmets | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.179(a)(43) Note | ANSI B30.9 | 1971 | Safety Code for Slings | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 180.205(f)(1) | CGA C-6.3 | 1991 | Guidelines for Visual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders | Compressed Gas Association | |
Coast Guard | 46 CFR 64.11(a) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1 with Addenda Issued December 31, 1989 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 86.1806-05(h)(1)(ii) | SAE J-1939-21 | 2001 | Data-Link Layer | Society of Automotive Engineers | |
Coast Guard | 46 CFR 147.7(e)(1) | DHHS 84-2024 | 1984 | The Ship's Medicine Chest and Medical Aid at Sea | U.S. Department of Health and Human Services | |
Veterans Affairs Department | 38 CFR 17.74(g)(5) | NFPA 72 | 2010 | National Fire Alarm and Signaling Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.33(b) | Drawing No. 78051-61X | 1997 | Head Assembly, Complete, Revision C | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (67) | USGS O-3105-83 | 1983 | Chlorophenoxy acids, total recoverable, gas chromatographic | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 60.17(g)(75) | ASTM D1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 98.314(c) | ASTM D3176 | 2002 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Environmental Protection Agency | 40 CFR 272.1301(a) | MOHWMP | 2014 | Missouri Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Missouri | |
Coast Guard | 46 CFR 56.01-2(d)(19) | ASME B16.28 | 1994 | Wrought Steel Buttwelding Short Radius Elbows and Returns | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(1) | ANSI B30.5, 5-1.1.1 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Load Ratings—Where Stability Governs Lifting Performance”), paragraphs (a)-(d) (including subparagraphs) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (76) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b) Appendix (6) | CEM Publication | 1992 | Closed Vessel Microwave Digestion of Wastewater Samples for Determination of Metals | CEM Corporation | |
Environmental Protection Agency | 40 CFR 98.124(e)(2) | ASTM D6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1282(a)(2)(i) | GRI-95/0368.1 | 1996 | Atmospheric Rich/Lean Method for Determining Glycol Dehydrator Emissions | Gas Research Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.939(a)(1)(ii) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(xiii) | NFPA 11 | 2005 | Standard for Low-Expansion Foam | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(v)(B) | ANSI B31.3 | 1966 | Chemical Plant and Petroleum Refinery Piping | American National Standards Institute | |
Veterans Affairs Department | 38 CFR 59.130(d)(1) | NFPA 101 | 2000 | Life Safety Code | National Fire Protection Association | |
National Highway Traffic Safety Administration | 9 CFR 317.309(c)(7)(ii) | FAO/WHO Publication | 1990 | Protein Quality Evaluation Report | Joint FAO/WHO Expert Consultation on Protein Quality Evaluation | |
Rural Utilities Service | 7 CFR 1728.201(h)(2)(i) | AWPA P5 | 2008 | Standard for Waterborne Preservatives | American Wood Protection Association | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-47 | 1975 | Isolation Transformers for Airport Lighting Systems | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 52.05-30(c) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | ASTM D5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | APHA Method 4500-P E | 1992 | Phosphorus, ascorbic acid method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 147.2550(a)(4) | WYUIC regulations | 1980 | Water Quality Rules and Regulations, Wyoming Department of Environmental Quality, Chapter IX: Wyoming Groundwater Pollution Control Permit (certified copy, signed April 9, 1980) | State of Wyoming | |
Environmental Protection Agency | 40 CFR 260.11(e)(1) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks, Third Edition | American Petroleum Institute | |
Minerals Management Service | 30 CFR 57.5047(b) | ANSI N13.8 | 1973 | Radiation Protection in Uranium Mines | American National Standards Institute | |
Coast Guard | 46 CFR 114.400(b), Smoke developed rating | ASTM E84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.2.11 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D2197 | 1991 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.32(c)(4) | ASME UPV Code | 1946 | Code for Unfired Pressure Vessels | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.151-17(a) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.710 Table 2 | ASTM D3231 | 2013 | Standard Test Method for Phosphorus in Gasoline | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.131(b)(2)(iv) Table | EPA Method 317.0 | 2001 | Determination of Inorganic Oxyhalide Disinfection By-products in Drinking Water Using Ion Chromatography With the Addition of a Postcolumn Reagent for Trace Bromate Analysis, Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(74) | ASTM D6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(h)(2) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.41da Anthracite | ASTM D388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Coast Guard | 46 CFR 139.130(b)(3) | ISO 9001:2008(E) | 2008 | International Standard: Quality management systems—Requirements | International Organization for Standardization | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-450A | 1975 | Flooring, Vinyl Plastic, Amendment 1 | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 59.412(b)(2) | ASTM D523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D1709 | 2001 | Standard Test Method for Impact Resistance of Plastic Film by the Free-Falling Dart Method | ASTM International |