This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.402(a) Note | ANSI/NFPA 70 | 1984 | National Electrical Code, exclusive of Formal Interpretations and Tentative Interim Amendments | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (53) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | USGS R-1171-76 | 1977 | Tritium. Liquid scintillation method, Denver lab | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(10) | EPA-450-3-77-018 | 1977 | Selecting Sites for Monitoring Total Suspended Particulates, Ludwig, F.L., J.H. Kealoha, and E. Shelar | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1616.32(a)(1) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Occupational Safety and Health Administration | 29 CFR 1926.601(b)(9) | 49 CFR part 571 | 2014 | Seat belts and anchorages (Department of Transportation, Federal Motor Vehicle Safety Standards) | U.S. Department of Transportation | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(3)(ii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.165(a) | ASTM D 5598 | 2001 | Standard Specification for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | ASTM D 511A | 1993 | Calcium by EDTA Titration | ASTM International | |
Rural Utilities Service | 21 CFR 172.133(a)(2) | FDA Publication | 1989 | Gas Chromatography Method for Dimethyl Carbonate Impurity in Dimethyl Dicarbonate | Food and Drug Administration, U.S. Department of Health and Human Services | |
National Highway Traffic Safety Administration | 49 CFR 571.139 S3 Snow tire | ASTM E 1136 | 2003 | Standard Specification for Radial Standard Reference Test Tire | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(15)(iv) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1728.201(e)(1)(i) | WCLIB No. 17 | 2004 | Grading Rules for West Coast Lumber | West Coast Lumber Inspection Bureau | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC H-22 | 1986 | DC Electric Bilge Pumps Operating Under 50 Volts | American Boat and Yacht Council | |
Coast Guard | 46 CFR 28.345(c) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure, and Commercial Motorcraft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | AOAC Method 993.30 | 1998 | Ortho-phosphate (as P), mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 435 Appendix 7, Subpart A | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 179.20 | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Recommended Service Procedure, Application | SAE J-1990 | 1991 | Extraction and Recycle Equipment for Mobile Automotive Air-Conditioning Systems | Society of Automotive Engineers | |
Coast Guard | 33 CFR 157.435(a)(1) | OCIMF Publication | 1988 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Environmental Protection Agency | 40 CFR 98.7(g)(4) | ISO/TR 15349-1 | 1988 | Unalloyed steel—Determination of low carbon content. Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation), First Edition | International Organization for Standardization | |
Coast Guard | 40 CFR 1065.703 Table 1 | ASTM D 4052 | 2011 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | ASTM International | |
Labor Department | 41 CFR 50-204.2(a)(3) | 14 CFR 103 | 2012 | Transportation of Compressed Gases | U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.135-7(b)(29) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.95(d) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 14.4.2 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 630 | 1993 | Dithiocarbamate Pesticides by UV-VIS Spectrophotometer | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.550(a)(6) | GAUIC regulations | 1988 | Georgia Hazardous Waste Management Act, O.C.G.A. §§ 12-8-60 through 12-8-83 | State of Georgia | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 1, (2)(b) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Coast Guard | 14 CFR 34.60(h) | ICAO Annex 16 | 2008 | Environmental Protection, Volume II, Aircraft Engine Emissions, Third Edition, Appendices 2, 3, 4, 5 and 6 | International Civil Aviation Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.110(a)(15) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Ethanol) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.2 Laminated partition | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with other Explosive Materials | Institute of Makers of Explosives | |
Coast Guard | 40 CFR 136.3(a) Table IF (4-methyl-2-pentanone (MIBK)) | EPA Method 1624 C | 1991 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(2) | ANSI A14.2 | 1990 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | NFPA 70 | 1996 | National Electrical Code (NEC) Article 445 | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 147.1100(a)(1) | MAUIC regulations | 1981 | Massachusetts General Laws Annotated chapter 21, sections 27, 43, and 44 (West 1981) | Commonwealth of Massachusetts | |
National Highway Traffic Safety Administration | 49 CFR 572.77(a)(2)(ii) | Drawing No. SA-572-S2 | 1994 | Type B accelerometer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 571.210 S4.3.2 | SAE J-826 | 1987 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.485a(g)(6) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269(v)(3) Note | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.1 | BHMA A156.19 | 2002 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.24b(e)(2) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Food and Drug Administration | 21 CFR 172.510(b) Footnote 1 | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.18.3M | 1996 | Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 761.60(g)(2)(ii) | ASTM D 923 | 1986 | Standard Practices for Sampling Electrical Insulating Liquids | ASTM International | |
Interior Department | 43 CFR 11.33(a) | DOI NRDAM/GLE | 1999 | The CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments Technical Documentation, Volumes I-IV, dated April 1996, including Revision I dated October 1997, and Revision II dated December 1999 | U.S. Department of the Interior | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (93) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA-600-R-95-131 | 1995 | Methods for the Determination of Organic Compounds in Drinking Water-Supplement III | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(f)(10) | ASME MFC-16 | 2007 | Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters | American Society of Mechanical Engineers |