This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(a)(3) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 52, Subpart JJ | NDSIP | 1979 | State Implementation Plan with Regulatory and Nonregulatory Revisions | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(d) | ASTM E 711 | 2004 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Food and Drug Administration | 21 CFR 177.1030(d)(2) | FDA Publication | 1987 | Extracted Acrylonitrile Monomer by Differential Pulse Polarography | Food and Drug Administration, U.S. Department of Health and Human Services | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) C13 | ASTM F 1055 | 1998 | Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.705(b)(3) | ASTM B 88 | 1993 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Food and Drug Administration | 21 CFR 177.1630(e)(4)(v) | ASTM D 2117 | 1982 | Tentative Method of Test for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method | ASTM International | |
Coast Guard | 33 CFR 164.46(a)(3)(iii), Note to 164.46(a) | IEC 61993-2 | 2001 | Maritime Navigation and Radiocommunication Equipment and Systems, Automatic Identification Systems (AIS) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.176-8(a)(4) | Federal Standard 191A | 1978 | Method 5804.1, Weathering Resistance of Cloth: Accelerated Weathering Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.055-3(j), Table 160.055-3(j) | Federal Standard CCC-A-700 (Now CCC-C-700) | 1986 | Cloth, Coated, Vinyl Coated (Artificial Leather) | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 920 | 1987 | Standard Specification for Elastomeric Joint Sealants | ASTM International | |
Food Safety and Inspection Service | 9 CFR 317.309(c)(1)(i)(B) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.923(b)(3) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(30) | NFPA 496 | 1967 | Standard for Purged Enclosures for Electrical Equipment in Hazardous Locations | National Fire Protection Association | |
Coast Guard | 46 CFR 56.30-35(a) | ASTM F 1548 | 1994 | Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications | ASTM International | |
Food and Drug Administration | 21 CFR 73.450(a)(1) | Food Chemicals Codex | 1981 | Riboflavin | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Type 2C1 Headlamp Dimensional Information | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (28) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Foaming agents) | APHA Method 5540 C | 1995 | Surfactants, Anionic Surfactants as MBAS | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(13) | ANSI A92.2 | 1969 | Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (27) | EPA Method 1624 B | 1990 | Volatile Organic Compounds by Isotope Dilution Purge & Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (PCBs (as Aroclors)) | EPA Method 508.1 | 1995 | Determination of Chlorinated Pesticides, Herbicides, and Organohalides by Liquid-Solid Extraction and Electron Capture Gas Chromatography | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.105a(f)(4) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Federal Communications Commission | 47 CFR 80.1101(d)(1)(ii) | IMO Resolution A.810(19) | 1995 | Performance Standards for Float-free Satellite Emergency | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 6.0 (10) | EPA-454-R-98-004 | 1998 | Quality Assurance Handbook for Air Pollution Measurement Systems, Volume II: Part 1—Ambient Air Quality Monitoring Program Quality System Development | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | ASTM D 3558B | 2008 | Cobalt by Flame Atomic Absorption, Extraction and Direct Aspiration | ASTM International | |
Rural Utilities Service | 7 CFR 1755.702(e)(1) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.24b(e)(2)(iii) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.253(f)(6)(i)(I) | NFPA 80 | 1970 | Standard for Fire Doors and Windows | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5190-3A | 1972 | Model Airport Hazard Zoning Ordinance1 | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.2 | ASTM D 2369 | 1992 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173, Appendix H, 3 | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Housing and Urban Development Department | 24 CFR 3280.703 | UL 174 | 1996 | Household Electric Storage Tank Water Heaters, Tenth Edition with 1997 Revisions | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 60.335(a)(3) | EPA Method 3A | 2014 | Determination of Oxygen and Carbon Dioxide Concentrations in Emissions From Stationary Sources (Instrumental Analyzer Procedure) | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 184.1141b(b) | Food Chemicals Codex | 1981 | Ammonium Phosphate, Dibasic | National Academy Press | |
Environmental Protection Agency | 40 CFR 75.6(a)(15) | ASTM D 1946 | 1990 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(48) | ASTM B 68 | 1995 | Standard Specification for Seamless Copper Tube, Bright Annealed | ASTM International | |
Coast Guard | 46 CFR 27.211(b) | ABYC H-25 | 1986 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Mine Safety and Health Administration | 30 CFR 57.14131(d) | SAE J-386 | 1993 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 169.529(mm) | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (33) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (7) Cadmium | EPA Method 200.7 | 1994 | ICP - metals | U.S. Environmental Protection Agency | |
Interior Department | 43 CFR 11.18(a)(3) | ILAC Publication | 1973 | Uniform Appraisal Standards for Federal Land Acquisition | Interagency Land Acquisition Conference | |
Coast Guard | 46 CFR 160.132-13(g)(1) | IMO MSC/Circular 980 | 2001 | Standardized Life-Saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.181(a)(1) | NHTSA Publication | 2009 | Parts List and Drawings, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES-2re, Alpha Version) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(b)(3)(ii)(D) | EPA Method 218.6 | 1994 | Determination of Dissolved Hexavalent Chromium in Drinking Water, Groundwater, and Industrial Wastewater Effluents by Ion Chromatography. Revision 3.3 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(ee) | EPA Method 1646 | 2015 | Procedure for Mixing Base Fluids With Sediments | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.585(f)(1)(i) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Environmental Protection Agency | 40 CFR 147.350(a)(2) | CTUIC regulations | 1990 | Connecticut General Statutes Annotated, Title 22a (Environmental Protection), Chapter 446K | State of Connecticut | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 3840 | 2014 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications | ASTM International |