This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Highway Administration | 23 CFR 625.4(d)(1)(ix)(B) | AASHTO LRFDLTS-1-I2-OL | 2018 | Interim Revisions to LRFD Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | American Association of State Highway and Transportation Officials | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 178 | 2010 | Standard Specification for Rubber Insulating Matting | ASTM International | |
Environmental Protection Agency | 40 CFR 60.111b Reid vapor pressure | ASTM D 323 | 1982 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(k)(8)(iii)(A) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 29 CFR 1926.6(dd)(14) | SAE J-396 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Energy Department | 10 CFR 431.76(d)(2) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Food and Drug Administration | 40 CFR 1065.360(c) | SAE 770141 | 1977 | Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts | Society of Automotive Engineers | |
Coast Guard | 40 CFR 60.18(f)(3) | ASTM D 1946 | 1990 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(157) | ASTM D 4442 | 1984 | Standard Test Method for Direct Moisture Content Measurement of Wood and Wood-Based Materials | ASTM International | |
Public Health Service | 42 CFR 37.10(e)(3) | NCRP Report No. 147 | 2005 | Structural Shielding Design for Medical X-Ray Imaging Facilities | National Council on Radiation Protection and Measurement | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(12) | ASTM D 471 | 1998 | Standard Test Method for Rubber Property—Effect of Liquids | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (32) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (5) Barium | APHA Method 3111 D | 1995 | Atomic Absorption Direct | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1917.94(b)(1)(iii) | ANSI/NSC Z41 | 1991 | Protective Footwear | National Safety Council | |
Coast Guard | 46 CFR 111.60-13(b)(2) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(27) | USA Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards, (also referred to as ANSI Z53.1-1967) | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (30) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(2)(i) | EPA Method 300.1 | 1997 | Determination of Inorganic Ions in Drinking Water by Ion Chromatography, Revision 1.0, (including Errata Cover Sheet, April 27, 1999) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 434.11(s) | NWS Technical Paper No. 40 | 1961 | Rainfall Frequency Altas of the U.S. | U.S. Department of Commerce, National Oceanic and Atmospheric Administration | |
Environmental Protection Agency | 40 CFR 80.165(c)(1)(i) | ASTM D 5500 | 2008 | Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Fuel for Intake Valve Deposit Formation | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(39) | ASTM A 522/A 522M | 1995 | Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service | ASTM International | |
Housing and Urban Development Department | 24 CFR 3282.12(b)(3)(i)(B)(3) | SBCCI Standard Mechanical Code | 2013 | Standard Mechanical Code | Southern Building Code Congress International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(d)(4) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 147.1450(a)(5) | NVUIC regulations | 1985 | Nevada Administrative Code [NAC], Regulations and Rules of Practice and Procedure adopted Pursuant to NRS 534A, Sections 1 through 69, Inclusive. November 12, 1985 (amending NAC Chapter 534A) | State of Nevada | |
Environmental Protection Agency | 40 CFR 63.5719(c)(4)(ii) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Minerals Management Service | 30 CFR 250.1202(b)(4)(i) | API MPMS | 1994 | Manual of Petroleum Measurement Standards | American Petroleum Institute | |
Coast Guard | 46 CFR 110.10-1(l)(2) | NFPA 77 | 2000 | Recommended Practice on Static Electricity | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 192.227(a) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108, 7.1.3 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(2) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Coast Guard | 33 CFR 126.5(b) | NFPA 51B | 1994 | Standard for Fire Prevention in Use of Cutting and Welding Processes | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (28) | EPA Method 150.2 | 1982 | ph - Electrometric, continuous monitor | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(131) | ASTM D 3270 | 1991 | Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1917.3(b)(8) | ANSI/ASSE Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American Society of Safety Engineers | |
Coast Guard | 46 CFR 12.05-11(a) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 174.100(e)(3) | ASTM F 1197 | 2000 | Standard Specification for Sliding Watertight Door Control Systems | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (34) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Federal Communications Commission | 47 CFR 15.109(g)(3) | IEC CISPR Publication 22 | 1997 | Information Technology Equipment--Radio Disturbance Characteristics--Limits and Methods of Measurement | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.133-3 | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.181(a)(4) | NHTSA Publication | 2008 | Procedures for Assembly, Disassembly and Inspection (PADI) of the ES-2re Side Impact Crash Test Dummy | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 4785 | 1993 | Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water (Superseded) | ASTM International | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(ii) | ASTM D 3246 | 1992 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(b)(1)(vi) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method B—Gravimetric Quimociac Method | Association of Florida Phosphate Chemists | |
National Highway Traffic Safety Administration | 49 CFR 571.202a S5.3.8 | SAE J-211/1 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (14) Lead | ASTM D 3559D | 2003 | Standard Test Methods for Lead in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) | EPA Method 7131 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.252(b)(2)(ii)(I) | ANSI Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.703(g)(8) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.337-18(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-18 | 1968 | Taxiway Guidance Sign System | Federal Aviation Administration, U.S. Department of Transportation |