This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.4415(a)(3) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 57.6201(a)(2) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Occupational Safety and Health Administration | 29 CFR 1910.1001(f)(1)(iv) | ANSI Z9.2 | 1979 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Coast Guard | 27 CFR 21.76(a) | National Formulary | 1980 | Formula No. 40-B | U.S. Pharmacopeial Convention | |
National Highway Traffic Safety Administration | 29 CFR 1917.93(b)(2) | ANSI/ISEA Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
Environmental Protection Agency | 40 CFR 92.9(b)(2)(iii) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3111 B | 1999 | Metals by Flame Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 17.0(4) | EPA Method 2 | 1991 | Determination of stack gas velocity and volumetric flow rate (Type S pitot tube) | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(1) | ACI 318R-95 | 1995 | Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 672 | 2001 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | ASTM International | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 816.49(a)(6)(i) | USDA Technical Release 210-VI-TR60 | 1985 | Earth Dams and Reservoirs | Soil Conservation Service, U.S. Department of Agriculture | |
Food and Drug Administration | 21 CFR 178.3530(a) | AOAC Publication | 1962 | Specification, Volume 45, page 66 | AOAC International | |
Coast Guard | 27 CFR 21.60(b)(1) 249 | The United States Pharmacopoeia | 1980 | Formula No. 33 | U.S. Pharmacopeial Convention | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM D 3679 | 1992 | Rigid Poly (Vinyl Chloride) (PVC) Siding | ASTM International | |
Coast Guard | 40 CFR 60.17(g)(192) | ASTM E 168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.33(b) | Drawing No. 78051-98 | 1987 | Title not specified | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (62) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 173.315(j)(1) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4)(iii) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 4126-1 | 1991 | Safety Valves | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(5) | ASME B30.14, Section 14-1.7.2 | 2004 | Side Boom Tractors, General Requirements—Exhaust Gases | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (70) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(d)(20) | ASME B16.29 | 2007 | Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1917.119(c) | ANSI A14.1 | 1990 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (16) | APHA Method 4500-Cl E | 1997 | Chlorine by Low-Level Amperometric Titration Method | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 100.205(e)(1) | ICC/ANSI A117.1 | 2003 | American National Standard: Accessible and Usable Buildings and Facilities | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (5) | EPA Method 150.1 | 1982 | pH, Electrometric Method | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 613 | 2013 | Standard Test Method for Cetane Number of Diesel Fuel Oil | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(e)(6)(iii) | ASTM D 1535 | 1989 | Specifying Color by the Munsell System | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(26) | ASTM D 3828 | 2007 | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 435.11(e) | EPA Method 1647 | 2015 | Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1867-12(a) | SAE J-2727 | 2012 | Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 147.950(a)(3)(iv) | LAUIC regulations | 1982 | Amendment to Statewide Order No. 29-B (Amendment concerning the underground injection control of saltwater disposal wells, enhanced recovery injection wells, and liquid hydrocarbon storage wells) (effective February 20, 1982) | State of Louisiana | |
Environmental Protection Agency | 40 CFR 63.11237 Natural gas (2) | ASTM D 1835 | 2005 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.1005 | NIST Special Publication 811 | 2008 | Guide for the Use of the International System of Units (SI) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.113 | ASTM A 691 | 2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature | ASTM International | |
Coast Guard | 46 CFR 56.20-1(c)(2)(ii) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (50) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC A-3 | 1970 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Coast Guard | 46 CFR 160.151-21(m) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.705(b)(3) | ISO 8217 | 2005 | Petroleum products--Fuels (class F)--Specifications of marine fuels | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(v)(K) | EPA Method 548.1 | 1992 | Endothall by Ion Exchange, Methylation, GC/MS | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.390(n)(3) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Food and Drug Administration | 21 CFR 131.200(e)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Public Health Service | 42 CFR 52b.12(b) | NFPA 99 | 1996 | Standard for Health Care Facilities | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table Note 2 | APHA Standard Methods On-Line | 2014 | On-line editions of Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61.18(a)(7) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-Cl I | 2000 | Chlorine, Iodometric Electrode | American Public Health Association | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(33) | API MPMS | 2005 | Chapter 10, Section 9 | American Petroleum Institute |