This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (1) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 60 | 1970 | Field Glued Plywood and Wood Frame Structural Floor Systems | U.S. Department of Housing and Urban Development | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 2197 | 1991 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(a)(2)(iii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 80.46(b)(1) | ASTM D 1319 | 2013 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.705(l)(3) | ANSI Z21.15 | 1997 | Manually Operated Gas Valves for Appliances, Appliances Connector Valves, and Hose End Valves | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Ziram [Zinc dimethyldithiocarbamate]) | EPA Method 630.1 | 1993 | Dithiocarbamate Pesticides by GC/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (2)(a)(iii)(1) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 4239 | 1997 | Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion | ASTM International | |
Coast Guard | 46 CFR 56.01-2(k)(6) | MSS SP-51 | 2003 | Class 150LW Corrosion Resistant Cast Flanges and Flanged Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Rural Utilities Service | 7 CFR 1755.390(i)(5)(iii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 8.110(b) | ABS Publication | 1998 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995 | 1967 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 136.110(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | APHA Method 4500-SO4(2-) D | 1992 | Sulfate, Gravimetric Method with Drying of Residue | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Appendix A, Method 315, Section 7.1.1 | ASTM D 2986 | 1995 | Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(12) | API RP 2SM | 2007 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Coast Guard | 46 CFR 154.24(b) | IMO Publication | 1975 | Code for Existing Ships Carrying Liquefied Gases in Bulk | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(9) | SAE J-573d | 1968 | Lamp Bulbs and Sealed Units | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (36) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(vii) | ASTM D 4891 | 1989 | Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion | ASTM International | |
Environmental Protection Agency | 40 CFR 60.58b(i)(6)(ii) | ASME PTC 4.1 | 1991 | Power Test Codes: Test Code for Steam Generating Units | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 184.1950(b) | Food Chemicals Codex | 1981 | Vitamin D | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1444(b)(3) | Food Chemicals Codex | 1996 | Maltodextrin | National Academy Press | |
Coast Guard | 36 CFR 1237.3(f)(1) | ISO 2859-1 | 1996 | Sampling Procedures for Inspection by Attributes--Part 1: Sampling Plans Indexed by Acceptable Quality Level (AQL) for Lot-by-Lot Inspection | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 52, Subpart CCC | VISIP | 1979 | Territory Plan with Regulatory and Nonregulatory Revisions | Virgin Island Territory | |
Occupational Safety and Health Administration | 29 CFR 1926.6(ff)(4) | ANSI B30.6 | 1969 | Safety Code for Derricks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (39) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 10 | NJDEP Publication | 1980 | Determination of Radium 228 in Drinking Water | State of New Jersey, Department of Environmental Protection | |
Environmental Protection Agency | 40 CFR 59.401 Nonflat coating | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Coast Guard | 21 CFR 145.3(m) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192, Appendix B, I | ASTM D 2517 | 2000 | Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 430.2, Definitions, ER incandescent reflector lamp (1) | ANSI C79.1 | 1994 | Nomenclature for Glass Bulbs Intended for Use with Electric Lamps | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(xiii) | ASTM D 6550 | 2010 | Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. C, 1.9 | AHAM DW-1 | 1992 | Household Electric Dishwashers | Association of Home Appliance Manufacturers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 1011/A 1011M | 2003 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | ASTM D 3867B | 2004 | Standard Test Methods for Nitrite-Nitrate in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN G | 1998 | Cyanide Amenable to Chlorination after Distillation | American Public Health Association | |
Environmental Protection Agency | 40 CFR 435.41(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(7) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Coast Guard | 46 CFR 169.115(c)(4) | FedSpec ZZ-H-451F | 1971 | Hose, Fire, Woven-Jacketed Rubber or Cambric-Lined, with Couplings | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.17(g)(52) | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (b)(3)(ii) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Coast Guard | 46 CFR 162.161-5(b)(1) | UL 2127 | 2001 | Standard for Safety for Inert Gas Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 161.002-1(b) | FM Class No. 3260 | 1994 | Flame Radiation Detectors for Automatic Fire Alarm Signaling | Factory Mutual Engineering and Research | |
Research and Special Programs Administration | 46 CFR 111.33-5(a) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(15)(ii) | 29 CFR 1910.23 | 2014 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | Occupational Safety and Health Administration, U.S. Department of Labor | |
Environmental Protection Agency | 40 CFR 60.17(g)(25) | ASTM D 240 | 1976 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International |