This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63, Subpart IIII, Appendix A, Section 2.1 | EPA-450-3-88-018 | 1988 | Protocol for Determining Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (38) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 903.1 | 1980 | Radium-226 Radon Emanation Technique | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 140.7(b) | ANSI Z41 | 1983 | Protective Footwear | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1) | ASTM D4057 | 2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(4)(ii) | NFPA 101 | 1970 | Life Safety Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 61.241 Maximum true vapor pressure (3) | ASTM D2879 | 1983 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(i)(13) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.632(f) | ASTM E169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(v) | ANSI Z41 | 1991 | Protective Footwear | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 503.8(b)(2) | APHA Method 9222 D | 1992 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(5) Note (1) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (38) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 903.0 | 1980 | Alpha-Emitting Isotopes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75.19(c)(3)(ii)(B)(2) | API MPMS | 2005 | Chapter 3, Section 1A | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1)(i) | ASTM D129 | 1964 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(4)(iii) | IME Pamphlet No. 17 | 1960 | Safety in the Handling and Use of Explosives | Institute of Makers of Explosives | |
Environmental Protection Agency | 40 CFR 63.111 Maximum true vapor pressure (3) | ASTM D2879 | 1983 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(i)(2) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 60.593a(b)(2) | ASTM E260 | 1973 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.208(a) | UL 268 | 1999 | Smoke Detectors for Fire Protective Signaling Systems | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 98.25-97(c)(2) | ASNT RP SNT-TC-1A | 1988 | Personnel Qualification and Certification for Nondestructive Testing | American Society for Nondestructive Testing | |
Environmental Protection Agency | 40 CFR 59.401 Concrete curing and sealing compound | ASTM C1315 | 1995 | Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(20) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 496 | 2003 | Purged and Pressurized Enclosures for Electrical Equipment | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 173.315(k)(3) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.1208(b)(7) | EPA SW-846 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 431.15(b)(7) | IEC 60034-12 | 1980 | Rotating Electrical Machines | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 571.209 S5.2(j)(2)(iii) | SAE J-211/1 | 2003 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(4)(i) | ISO 175:1999(E) | 1999 | Plastics—Methods of test for the determination of the effects of immersion in liquid chemicals, Second Edition | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(7) | ANSI Z41.1 | 2014 | Men's Safety-Toe Footwear | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | APHA Method 4500-NO3 H | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart R | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN E | 1992 | Cyanide by Colorimetric Determination | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D2986 | 1978 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.801(b) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
Federal Trade Commission | 16 CFR 460.5(e)(1)(iii) | ASTM C739 | 2003 | Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.187(b) | Drawing No. 175-5506 | 2009 | Lumbar cable assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footnote 18 | Quanti-Tray® Method | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(18) | SAE J-1978 | 2002 | OBD II Scan Tool—Equivalent to ISO/DIS 15031-4 | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 177.1520(b) | ASTM D611 | 1982 | Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(2) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(152) | ASTM D4239 | 1985 | Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM D3678 | 1988 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay | ASTM International | |
Coast Guard | 46 CFR 160.132-3 | IMO LSA Code | 2010 | International Life-Saving Appliances, including LSA Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(1) | Drawing No. 92041-008 | 1995 | Head Skin Without Nose | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1728.97(e)(11) | AWPA P5 | 2008 | Standard for Waterborne Preservatives | American Wood Protection Association | |
Coast Guard | 46 CFR 56.01-2(d)(14) | ASME B16.21 | 2005 | Nonmetallic Flat Gaskets for Pipe Flanges | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(25) | ASTM D2986 | 1995 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International |