Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
Accessing Standards Incorporated by Reference
This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
| Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Environmental Protection Agency | 40 CFR 419.53(c)(1)(i) | EPA-440-1-82-014 | 1985 | Development Document for Effluent Limitations Guidelines, New Source Performance Standards, and Pretreatment Standards for the Petroleum Refining Point Source Category, Table III-7, pp. 49-54. | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 91.115(a) | SAE J-1228 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | Society of Automotive Engineers | |
| Environmental Protection Agency | 40 CFR 80.47(k)(3) | ASTM D6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
| Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(11)(ii) | EPA-600-4-79-020 | 1983 | Method 353.1--Colorimetric automated, hydrazine reduction | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | ASTM D1687C | 1992 | Standard Test Methods for Chromium in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
| Environmental Protection Agency | 40 CFR 92.5(b)(10) | ASTM D5186 | 1991 | Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography | ASTM International | |
| Energy Department | 10 CFR 430.3(e)(9) | ASHRAE 103 | 1993 | Methods of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
| Coast Guard | 46 CFR 160.051-7(l) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
| National Highway Traffic Safety Administration | 49 CFr 572.173(b) | Drawing No. 420-2000 | 2011 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 11 | 2014 | Foam Systems | National Fire Protection Association | |
| Coast Guard | 33 CFR 155.1050(k)(2)(iv) | ASTM F1737 | 2007 | Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems | ASTM International | |
| Federal Communications Commission | 47 CFR 76.602(b)(7) | SCTE 40 (formerly DVS 313) | 2003 | Digital Cable Network Interface Standard | Society of Cable Telecommunications Engineers | |
| Health and Human Services Department | 45 CFR 162.1602(a) | ASC X12N 835 | 2002 | Addenda to Health Care Claim Payment/Advice | Washington Publishing Company | |
| National Highway Traffic Safety Administration | 49 CFR 571.5(d)(19) | ASTM D1193 | 1970 | Standard Specification for Reagent Water | ASTM International | |
| Coast Guard | 46 CFR 111.60-3(b)(2) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table ID (34) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
| Research and Special Programs Administration | 49 CFR 195.3(c) D1 | MSS SP-75 | 2004 | Specification for High-Test Wrought Butt Welding Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
| Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | APHA Method 4110 B | 1995 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 63.1503, TEQ | EPA-625-3-89-016 | 1989 | Interim Procedures for Estimating Risks Associated with Exposures to Mixtures of Chlorinated Dibenzo-p-Dioxins and -Dibenzofurans (CDDs and CDFs) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (35) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 141.25(a) Table Note 1 | EPA-600-4-80-032 | 1980 | Prescribed Procedures for Measurement of Radioactivity in Drinking Water | U.S. Environmental Protection Agency | |
| Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/AHA A135.6 | 1990 | Hardboard Siding | American Hardboard Association | |
| Environmental Protection Agency | 40 CFR 60.4360 | ASTM D4084 | 1994 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.253(e)(5)(i) | CGA Publication | 1958 | Specification for Rubber Welding Hose | Compressed Gas Association | |
| Mine Safety and Health Administration | 30 CFR 57.14130(h) | SAE J-1194 | 1989 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
| Rural Utilities Service | 7 CFR 1755.890(a)(7) | ASTM D4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
| Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D4239 | 1985 | Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1953 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
| Coast Guard | 46 CFR 31.40-15 | IMO SOLAS | 1974 | International Convention for the Safety of Life at Sea | International Maritime Organization | |
| Coast Guard | 30 CFR 56.13030(d) | ASME B&PV Code | 1977 | Boiler and Pressure Vessel Code, Sections I-VII | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(g)(1) | ACGIH Publication | 1970 | Threshold Limit Values of Airborne Contaminants | American Conference of Governmental Industrial Hygienists | |
| Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-521F | 1980 | Insulation Blankets, Thermal (Mineral Fiber) for Ambient Temperatures | Federal Specifications Standards and Test Methods | |
| Research and Special Programs Administration | 49 CFR 173.125(b)(1) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
| Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(f) | ASTM D6357 | 2011 | Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry | ASTM International | |
| Energy Department | 10 CFR 434.701.1 RS-47 | ASHRAE Handbook | 1995 | HVAC Systems and Applications (RS-47) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
| Federal Railroad Administration | 49 CFR 238 Appendix B (b) Specific Extinction Area | ASTM E1354 | 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter | ASTM International | |
| Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(viii) | ISO 1183-1:2004(E) | 2004 | Plastics—Methods for determining the density of non-cellular plastics—Part 1: Immersion method, liquid pyknometer method and titration method, First Edition | International Organization for Standardization | |
| Occupational Safety and Health Administration | 29 CFR 1910.218(e)(1)(iv) | ANSI B31.1.0 Addenda | 2014 | Addenda to Code for Pressure Piping | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (37) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 52.741(q)(1)(vi)(B) | 35 I.A.C. 215 | 1989 | Administrative Code, Section 215(a)(2) | State of Illinois | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 59.515(a)(3) | ASTM D523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
| Federal Aviation Administration | 14 CFR 150 Appendix A A150.5(b) | ANSI S1.13 | 1979 | Methods for the Measurement of Sound Pressure Levels in Air | American National Standards Institute | |
| National Highway Traffic Safety Administration | 49 CFR 572.185(c) | Drawing No. 175-4000 | 2009 | Thorax Assembly with Rib Extensions | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 136.3(b)(20)(ii) | IDEXX Test Methods | 2002 | Colilert-18® Method | IDEXX Laboratories | |
| Environmental Protection Agency | 40 CFR 435.41(mm) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 86.1(e)(2) | ISO 15765-4:2005(E) | 2005 | Road Vehicles—Diagnostics on Controller Area Networks (CAN)—Part 4: Requirements for emissions-related systems | International Organization for Standardization | |
| Food and Drug Administration | 21 CFR 177.1312(c)(2) | ASTM D1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
| Coast Guard | 33 CFR 127.003(b) | ASME B31.3 | 1993 | Chemical Plant and Petroleum Refinery Piping | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.17(g)(100) | ASTM D2584 | 1968 | Standard Test Method for Ignition Loss of Cured Reinforced Resins | ASTM International |