| Environmental Protection Agency |
|
40 CFR 60.632(f) |
ASTM E169 |
1993 |
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
|
ASTM International |
| Coast Guard |
|
46 CFR 111.01-9(a) |
NEMA Publication 250 |
2001 |
Enclosures for Electrical Equipment (1000 Volts Maximum)
|
National Electrical Manufacturers Association |
| Environmental Protection Agency |
|
40 CFR 430.01(a) |
EPA Method 1650 |
2014 |
Adsorbable Organic Halides by Adsorption and Coulometric Titration
|
U.S. Environmental Protection Agency |
| Research and Special Programs Administration |
|
21 CFR 173.165(d) |
Food Chemicals Codex |
1981 |
Candida Lipolytica
|
National Academy Press |
| Environmental Protection Agency |
|
40 CFR 80.177(a)(5) |
ASTM D4814 |
2013 |
Standard Specification for Automotive Spark-Ignition Engine Fuel
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 90.509(a) |
ASTM E29 |
1993 |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 94.2(b), Annex VI Technical Code |
Annex VI of MARPOL 73/78 |
1997 |
Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines
|
International Maritime Organization |
| Coast Guard |
|
46 CFR 175.600(b) Table |
ABYC E-8 |
2001 |
Alternating Current (AC) Electrical Systems on Boats
|
American Boat and Yacht Council |
| Environmental Protection Agency |
|
40 CFR 63.3151(b) |
ASTM D5965 |
2002 |
Standard Test Method for Specific Gravity of Coating Powders
|
ASTM International |
| Energy Department |
|
10 CFR 430 Subpart B, App. N, 2.2 |
ASHRAE 103 |
1993 |
Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Housing and Urban Development Department |
|
24 CFR 200.945(a)(2) |
ASTM D3936 |
1980 |
Standard Test Method for Delamination Strength of Secondary Backing of Pile Floor Coverings
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (24) |
EPA Method 602 |
1982 |
Purgeable Aromatics by GC/PID Purge & Trap
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 164.023-7(b)(1) |
Federal Standard 191A |
1978 |
Method 4100, Strength and Elongation, Breaking; and Tenacity; of Thread and Yarn; Single Strand
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (32) |
APHA Method 3111 B |
1999 |
Metals by Flame Atomic Absorption
|
American Public Health Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.269 Appendix G |
ASTM D1049 |
2010 |
Standard Specification for Rubber Insulating Covers
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (5) Barium |
APHA Method 3113 B |
1995 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 147.2600(a)(4) |
GUUIC regulations |
1981 |
Guam Environmental Protection Agency, Water Quality Standards, Section I-IV (approved September 25, 1981, effective November 16, 1981).
|
Guam Territory |
| Research and Special Programs Administration |
|
49 CFR 171.8 "Viscous liquid" |
ASTM D445 |
1972 |
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63, Subpart UUUU, Table 4, (1)(a)(iii)(2) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(1) |
AGA Report No. 3, Part 1 |
1990 |
Orifice Metering for Natural Gas and Other Related Hydrocarbon Fluids, Part 1: General Equations and Uncertainty Guidelines
|
American Gas Association |
| Coast Guard |
|
46 CFR 114.600(b) |
ASTM D635 |
1997 |
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(1)(i)(H) |
EPA-600-8-78-017 |
1978 |
Microbiological Methods for Monitoring the Environment, Water, and Wastes, Part III Analytical Methodology, Section D Fecal Streptococci, 5 Pour Plate Method, page 143
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table |
APHA Method 7500-Ra B |
1998 |
Radium 226 - Precipitation
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 52.741(a)(2)(ii)(A) |
35 I.A.C. 211 |
1996 |
Definitions and General Provisions
|
State of Illinois |
| Environmental Protection Agency |
|
40 CFR 60.4415(a)(1)(i) |
ASTM D5453 |
2005 |
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
|
ASTM International |
| Rural Utilities Service |
|
7 CFR 1755.890(f)(2) |
ICEA S-84-608 |
1988 |
Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements
|
Insulated Cable Engineers Association |
| Environmental Protection Agency |
|
40 CFR 60.45(f)(5)(ii) |
ASTM D5865 |
1998 |
Standard Test Method for Gross Calorific Value of Coal and Coke
|
ASTM International |
| Housing and Urban Development Department |
|
24 CFR 3280.202 Limited Combustible (1) |
NFPA 220 |
1995 |
Standard Types of Building Construction
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 160.052-5(c) |
Drawing No. 160.052-1, Sheet 4 |
2012 |
Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Insert Patterns
|
U.S. Coast Guard |
| Coast Guard |
|
46 CFR 121.240(a) |
ABYC A-1 |
1993 |
Marine Liquefied Petroleum Gas Systems
|
American Boat and Yacht Council |
| Environmental Protection Agency |
|
40 CFR 63.1215(f)(5)(i) |
ASTM D6735 |
2001 |
Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources--Impinger Method
|
ASTM International |
| Energy Department |
|
10 CFR 431.15(b)(3) |
CSA C390 |
1993 |
Input-Output Method With Indirect Measurement of the Stray-Load Loss and Direct Measurement of the Stator Winding (I2R), Rotor Winding (I2R), Core and Windage-Friction Losses
|
Canadian Standards Association |
| Health and Human Services Department |
|
45 CFR 162.920(a)(5) |
ASC X12N 834 |
2002 |
Addenda to Benefit Enrollment and Maintenance, Version 4010
|
Washington Publishing Company |
| Food and Drug Administration |
|
21 CFR 131.120(c) |
AOAC Official Methods |
1980 |
Official Methods of Analysis
|
AOAC International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.177(b)(10) |
Drawing No. SA-572-S42 |
1996 |
Tilt sensors
|
Reprographic Technologies |
| Occupational Safety and Health Administration |
|
29 CFR 1926.602(a)(5) |
SAE J-321a |
1970 |
Fenders for Pneumatic-Tired Earthmoving Haulage Equipment
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(35) |
SAE J-942 |
1965 |
Passenger Car Windshield Washer Systems
|
Society of Automotive Engineers |
| Coast Guard |
|
40 CFR 136.3(a) Table IB (22) |
ASTM D1688C |
2002 |
Standard Test Methods for Copper in Water, Atomic Absorption, Graphite Furnace
|
ASTM International |
| National Archives and Records Administration |
|
36 CFR 1238.14(b) |
ISO 18901 |
2002 |
Imaging Materials--Processed Silver-gelatin Type Black-and-White Films--Specifications for Stability
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID (46) |
EPA Method 505 |
1995 |
Analysis of Organohalide Pesticides and Commercial Polychlorinated Biphenyl (PCB) Products in Water by Microextraction and Gas Chromatography - Revision 2.1
|
U.S. Environmental Protection Agency |
| National Highway Traffic Safety Administration |
|
49 CFR 572.9(a) |
Drawing No. SA 150 M050 |
1996 |
Lumbar Spine Assembly
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-8, Method 29, Section 17.0(2) |
EPA Method 6020 |
1986 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 183.410(d) |
UL 595 |
1991 |
Marine-Type Electric Lighting Fixtures
|
Underwriters Laboratories, Inc. |
| Minerals Management Service |
|
30 CFR 250.1630(a) |
API RP 14C |
2007 |
Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IC (49) |
APHA Method 6410 B |
2000 |
Base/Neutral and Acid Extractable Compounds by GC/MS
|
American Public Health Association |
| Coast Guard |
|
46 CFR 133.70(b)(2)(ii) |
IMO Resolution A.760(18) |
1993 |
Symbols Related to Life-Saving Appliances and Arrangements
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (3) |
EPA Method 200.8 |
1994 |
Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry
|
U.S. Environmental Protection Agency |
| Federal Railroad Administration |
|
49 CFR 238 Appendix B (a)(2) |
Federal Standard 191A |
1978 |
Textile Test Method 5830, Leaching Resistance of Cloth: Standard Method
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
|
40 CFR 94.7(c)(1) |
ASM CS-104 UNS No. G10460 |
1985 |
Alloy Digest (Carbon Steel of Medium Carbon Content)
|
ASM International |
| Coast Guard |
|
46 CFR 54.03-1 |
ASME B&PV Code |
1998 |
Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda)
|
American Society of Mechanical Engineers |