This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.052-3(d)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(2)(i) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1910.6(y)(3) | ISO 10156:1996 (E) | 1996 | Gases and Gas Mixtures—Determination of Fire Potential and Oxidizing Ability for the Selection of Cylinder Valve Outlets, Second Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 26, Section 7.1.2 | ASTM D1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(C) | UL 80 | 1963 | Steel Inside Tanks for Oil-Burning Fuel | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 430 Subpart B, App. O, 2.2.2 | UL 729 | 1976 | Oil-Fired Floor Furnaces | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 52.741(w)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Energy Department | 10 CFR 430.3(g)(3) | AHAM HRF-1 | 1979 | American National Standard, Household Refrigerators, Combination Refrigerator-Freezers and Household Freezers | Association of Home Appliance Manufacturers | |
Energy Department | 10 CFR 434.701.1 RS-9 | LTH Report TVAHB-3007 | 1981 | Thermal Bridges in Sheet Metal Construction (RS-9) | Lund Institute of Technology | |
Health and Human Services Department | 45 CFR 162.920(a)(1) | ASC X12N 837 | 2002 | Addenda to Health Care Claim: Dental, version 4010 | Washington Publishing Company | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(28) | ASTM E77 | 1966 | Standard Method for Inspection, Test, and Standardization of Etched-Stem Liquid-in-Glass Thermometers | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (35) | ASTM D5812 | 2002 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography | ASTM International | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(vi) | API MPMS | 2005 | Chapter 12, Section 2, Part 4 | American Petroleum Institute | |
Coast Guard | 46 CFR 111.50-3(g)(2) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (36) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | APHA Method 4110 B | 1992 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.251(k) Lignite | ASTM D388 | 1990 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xviii) | APHA Method 3113 | 2004 | Metals by Electrothermal Atomic Absorption Spectrometry | American Public Health Association | |
Environmental Protection Agency | 40 CFR 798.6560(f)(3) | EPA-600-1-76-025 | 1976 | Pesticide Induced Delayed Neurotoxicity, Proceedings of a Conference, February 19-20, 1976, Washington, DC | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.194(e) | NLA Publication | 2008 | CO2 Emissions Calculation Protocol for the Lime Industry—English Units Version, February 5, 2008 Revision | National Lime Association | |
Coast Guard | 46 CFR 182.320(a)(3) | UL 1453 | 1988 | Electric Booster and Commercial Storage Tank Water Heaters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 54.01-25(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(119) | ASTM D3176 | 1974 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.202a S5.2 | SAE J-826 | 1995 | Devices for Use in Defining and Measuring Vehicle Seating Accommodations | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(12) | ANSI A17.2b | 1967 | Practice for the Inspection of Elevators (Inspector's Manual) Supplement | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-558B | 1976 | Insulation Blocks, Boards, Blankets, Felts Sleeving (Pipe and Tub Coverings), and Pipe Fitting Covering, Thermal (Mineral Fiber, Insulation Type) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 63.1329(c)(2)(ii) | ASTM D3370 | 1976 | Standard Practices for Sampling Water | ASTM International | |
Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(vii) | ASTM E648 | 2000 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(6) | ASME B16.4 | 1998 | Gray Iron Threaded Fittings, Classes 125 and 250 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 62.15265(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Consumer Product Safety Commission | 16 CFR 1201.7(c)(2) | ANSI Z97.1 | 1975 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(iv) | ISO 604:2002(E) | 2002 | Plastics—Determination of compressive properties, Third Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (38) | EPA Method 300.1 | 1997 | Ion chromatography - anions, Revision 1.0 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 164.007-1(b) | ASTM E119 | 1998 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.185(c)(1)(i) | Drawing No. 175-8000 | 2009 | Neoprene Body Suit | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 261.1083(c)(3)(ii)(B) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks, Third Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table | EPA Method 1601 | 2001 | Male-specific (F+) and somatic coliphage in water by two-step enrichment procedure | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.606(c)(3)(ii)(A) | AFPC Book of Methods | 1991 | Section IX, Methods of Analysis for Phosphate Rock, No. 1 Preparation of Sample | Association of Florida Phosphate Chemists | |
Food and Drug Administration | 16 CFR 1203.53(b) | ASTM F1446 | 1993 | Standard Test Method for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear | ASTM International | |
Research and Special Programs Administration | 49 CFR 176.11(a) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1755.890, Appendix A (III)(5)(c) | ASTM D4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(70) | ASTM D1835 | 2003 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-185 | 1988 | Recommended Practice for Access Systems for Off-Road Machines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.115-21(a)(1) | IMO MSC.1/Circular 1205 | 2006 | Guidelines for Developing Operation and Maintenance Manuals for Lifeboat Systems | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(iv)(A)(2) | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
National Archives and Records Administration | 36 CFR 1238.20(a) | PIMA IT9.2 | 1998 | Photographic Processed Films, Plates, and Papers--Filing Enclosures and Storage Containers | Association for Information and Image Management | |
National Highway Traffic Safety Administration | 49 CFR 572.110(a)(12) | Drawing No. SA-SID-M080 | 1987 | Leg Assembly, Right | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(ii) | ASTM D2015 | 1977 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1211.5 (b)(4) | Supplement SA of UL 325 | 2017 | Standard for Safety: Door, Drapery, Gate, Louver, and Window Operators and Systems, SUPPLEMENT SA—(Normative)—UL 60335-1/CAN/CSA-C22.2 No. 60335-1 Based Requirements for the Evaluation of Electronic Circuits | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 434.403.1 Table 403.1d | AHAM RAC-1 | 1992 | Room Air Conditioners (RS-40) | Association of Home Appliance Manufacturers |