This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 119.440(a)(2)(i) | ASTM D 635 | 1997 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM International | |
Environmental Protection Agency | 40 CFR 272.201(c)(1) | ARHWMP | 2007 | Arkansas Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Arkansas | |
Rural Utilities Service | 7 CFR 1755.405(c)(6) | IEEE 743 | 1984 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 108.655(e) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(17) | ASTM D 93 | 1971 | Test for Flash Point by Pensky Martens Closed Cup Tester | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.301b(c)(1) | ISO 10297 | 1999 | Gas cylinders--Refillable gas cylinder valves--Specification and type testing | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 178.3910(a)(4)(i)(C) | ASTM D 156 | 1982 | Standard Method of Test for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) | ASTM International | |
Food and Drug Administration | 21 CFR 101.83(c)(2)(ii)(A)(2) | UUSI Publication | 2000 | Determination of the Sterol Content in Margerines, Halvarines, Dressings, Fat Blends and Sterol Fatty Acid Ester Concentrates by Capillary Gas Chromatography | Unilever United States, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(51) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.926(d)(1)(ii)(B)(2)(ii) | CABO 1 & 2 Family Code | 1992 | One and Two Family Dwelling Code with Errata Package and 1993 Amendments | Council of American Building Officials | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(3)(i) | ASTM D 2583 | 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (3) Arsenic | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.9539(b) | OECD No. 474 | 1977 | Guidelines for the Testing of Chemicals, Mammalian Erythrocyte Micronucleus Test | Organization for Economic Cooperation and Development | |
Coast Guard | 46 CFR 160.077-21(c)(3) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(3) | Drawing No. 420-3800 | 2011 | Shoulder assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 3 | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1653 (18.2) | EPA Method 6240 | 1984 | 6240-Chlorinated Phenolics (Interim Standard), Draft Version | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(m)(4) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iv)(B)(1) | API 620 | 1966 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Mine Safety and Health Administration | 30 CFR 75.818(b)(4) | ASTM F 496 | 1997 | Standard Specification for In-Service Care of Insulating Gloves and Sleeves | ASTM International | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (6) | ASTM D 2972 | 2008 | Arsenic by Gaseous Hydride Atomic Absorption | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart PPPP, Appendix A, Section 2.4 | ASTM E 145 | 2003 | Standard Specification for Gravity-Convection and Forced- Ventilation Ovens | ASTM International | |
Environmental Protection Agency | 40 CFR 63.1506(c)(1) | ACGIH Publication | 1998 | Industrial Ventilation Manual: A Manual of Recommended Practice, 23rd Edition, Chapters 3 and 5 | American Conference of Governmental Industrial Hygienists | |
Minerals Management Service | 30 CFR 56.5005(b) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Coast Guard | 46 CFR 111.15-2(b) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Research and Special Programs Administration | 24 CFR 200.925c(a)(1)(iii) | ICBO Uniform Building Code | 1991 | Uniform Building Code | International Conference of Building Officials | |
Environmental Protection Agency | 40 CFR 761.19(a)(10) | ASTM D 1796 | 1990 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) | ASTM International | |
Environmental Protection Agency | 40 CFR 98.324(b)(1) | MSHA Handbook Number: PH-08-V-1 | 2008 | General Coal Mine Inspection Procedures and Inspection Tracking System | Mine Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 46 CFR 58.03-1(g)(3) | ASTM B 122/B 122M | 1995 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 302/A 302M | 1993 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum Nickel | ASTM International | |
Coast Guard | 46 CFR 184.200 | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.17(g)(150) | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(2) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Public Health Service | 42 CFR 84.1154(b) | ANSI K13.1 | 1973 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(32) | SAE J-921 | 1965 | Instrument Panel Laboratory Impact Test Procedure | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 147.2600(a)(2) | GUUIC regulations | 1974 | Water Pollution Control Act, Government Code of Guam sections 57042 and 57045, P.L. 9-76 (July 29, 1967), as amended by P.L. 9-212 (August 5, 1968), as amended by P. L. 10-31 (March 10, 1969), as amended by P.L. 12-191 (December 30, 1974) | Guam Territory | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(3)(v) | ASME OM Code | 1995 | Code for Operation and Maintenance of Nuclear Power Plants, Subsection ISTD, Inservice Testing of Dynamic Restraints (Snubbers) in Light-Water Reactor Power Plants, 1995 Edition through the latest edition and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(b) Note to paragraph (b) | ASTM F 712 | 2011 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | APHA Method 6420 B | 2000 | Phenols by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-Ra B | 2001 | Radium 226 - Precipitation | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1) | ASTM D 4057 | 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G)(3)(iv) | EPA-600-4-79-020 | 1983 | Method 375.4--Turbidimetric | U.S. Environmental Protection Agency | |
Drug Enforcement Administration | 21 CFR 1311.08(b)(5) | FIPS Publication 186-3 | 2009 | Digital Signature Standard (DSS) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.1 | ASTM D 2234 | 1998 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Coast Guard | 46 CFR 114.400(b), Flame spread | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(v)(1)(i) | 35 I.A.C. 215, Subpart S | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(b)(5)(ii) | ASTM D 4101 | 1982 | Standard Specification for Propylene Plastic Injection and Extrusion Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.300-7(a) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International |