This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 440 Appendix A | FedSpec HH-I-1972/1 | 1981 | Polyurethane or Polyisocyanurate Insulation Board Faced with Aluminum Foil on Both Sides | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.052-5(b) | Drawing No. 160.052-1, Sheet 3 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Cutting Pattern and General Arrangement, Model CPS | U.S. Coast Guard | |
Pipeline and Hazardous Materials Safety Administration | 29 CFR 1926.152(i)(1)(v)(B) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 147.2200(b)(2)(i) | TXUIC regulations | 2014 | Vernon's Texas Codes Annotated, Government Code Title 10, Chapters 2001, 552, and 311 | State of Texas | |
Environmental Protection Agency | 40 CFR 63, Subpart II, Appendix A, Footnote 1 | EPA-340-1-86-016 | 1974 | A Guide for Surface Coating Calculation | U.S. Environmental Protection Agency | |
Postal Service | 39 CFR 20.3 | USPS Publication | 2009 | International Mail Manual | U.S. Postal Service | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.164 | ANSI/NFPA 72A | 2014 | Local Protective Signaling Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(2) | ASTM D 93 | 2013 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(8) | NFPA 37 | 1970 | Standard for the Installation and use of Stationary Combustion Engines and Gas Turbines | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 189.175(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 177.840(u) | CI Pamphlet 57 | 2003 | Emergency Shut-Off Systems for Bulk Transfer of Chlorine | Chlorine Institute, Inc. | |
Mine Safety and Health Administration | 30 CFR 75.1107-3(b) | NFPA 22 | 1971 | Standard for Water Tanks for Private Fire Protection | National Fire Protection Association | |
National Highway Traffic Safety Administration | 29 CFR 1918.104(b)(1)(ii) | ANSI Z41 | 1999 | Protective Footwear | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 59.208(j)(3) | SCAQMD Method 25.1 | 1989 | Determination of Total Gaseous Non-Methane Organic Emissions as Carbon | South Coast Air Quality Management District | |
Food and Drug Administration | 21 CFR 801.410(d)(2) | ASTM D 412 | 1968 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.73(a) | Drawing No. SA 106C 001 | 1997 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 9 | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (n-Amyl alcohol) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.890(i)(2) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Federal Trade Commission | 16 CFR 460.5(b) | ASTM C 1371 | 2004 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(m)(1) | ISO/IEC 17011 | 2005 | Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies, First edition | International Organization for Standardization / International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (85) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Total Chlorine) | APHA Method 4500-Cl D | 2000 | Chlorine, Amperometric direct | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 115, 2.1.6 | EPA-520-5-85-0029 | 1986 | Radon Flux Measurements on Gardinier and Royster phosphogypsum Piles Near Tampa and Mulberry, Florida; Hartley, J.N. and Freeman, H.D. | U.S. Environmental Protection Agency | |
Coast Guard | 30 CFR 250.901(d)(1) | ACI 318 | 1995 | Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(i) | ISO 11118 | 1999 | Gas cylinders--Non-refillable metallic gas cylinders--Specification and test methods | International Organization for Standardization | |
Coast Guard | 46 CFR 160.049-1(a)(3) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (22) Selenium | ASTM D 3859B | 1998 | Standard Test Methods for Selenium in Water, Graphite Furnace AAS | ASTM International | |
Environmental Protection Agency | 40 CFR 60.251(d)(2) Coal | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.855 | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.200(h)(2) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-27(c) | IMO Resolution MSC.295(87) | 1996 | Annex 9 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.295(87), Adoption of Amendments to the Revised Recommendation on Testing of Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24A, Section 7.1 | ASTM D 1475 | 1980 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Coast Guard | 46 CFR 160.151-31(e) | IMO Revised recommendation on testing | 2010 | Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
National Highway Traffic Safety Administration | 10 CFR 52 App. C, VI B 1 | AP 600 | 1999 | Tier 1, Tier 2, and Generic Technical Specifications | Westinghouse Electric Company | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(vii) | ASTM D 2583 | 2007 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM International | |
Coast Guard | 46 CFR 56.60-15(b) | ASTM A 395/A 395M | 1998 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Energy Department | 10 CFR 431.133(b)(2) | ASHRAE 29 | 2005 | Methods of Testing Automatic Ice Makers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Rural Utilities Service | 7 CFR 1728.97(a)(9) | RUS Bulletin 50–34 (D–6) | 1970 | RUS Specification for Secondary Swinging Clevises | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (61) | APHA Method 4500-SiO2 E | 1997 | Automated Method for Molybdate-Reactive Silica | American Public Health Association | |
Coast Guard | 46 CFR 160.115-5(b)(1) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 35.01-3(b) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Labor Department | 41 CFR 50-204.2(a)(2)(ii) | 30 CFR 211 | 2014 | Coal-Mining Operating and Safety Regulations | Bureau of Mines, U.S. Department of Interior | |
Environmental Protection Agency | 40 CFR 91.6(b)(1) Table | ASTM D 3231 | 1989 | Standard Test Method for Phosphorous in Gasoline | ASTM International | |
Environmental Protection Agency | 40 CFR 122.26(b)(15)(i)(A) | ARS Handbook 703 | 1997 | Predicting Soil Erosion by Water: A Guide to Conservation Planning With the Revised Universal Soil Loss Equation (RUSLE) | Agriculture Research Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xxxviii) | APHA Method 4500-Cl | 2000 | Chlorine (Residual) | American Public Health Association | |
Environmental Protection Agency | 40 CFR 795.3500(b)(1)(ii) | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 98.164(b)(5)(viii) | ASTM D 4057 | 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | ASTM International | |
Coast Guard | 21 CFR 178.3910(a)(4)(i)(B) | ASTM D 381 | 1980 | Standard Method of Test for Existent Gum in Fuels by Jet Evaporation | ASTM International | |
National Archives and Records Administration | 36 CFR 1237.16(b) | ISO 18902 | 2001 | Imaging Materials--Photographic Processed Films, Plates, and Papers--Filing Enclosures and Storage Containers | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.13.2 | SAE J-1703 | 1983 | Motor Vehicle Brake Fluid | Society of Automotive Engineers |