This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CAN/CGSB 43.147 | 2005 | Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for the Handling, Offering for Transport, or Transportation of Dangerous Goods by Rail | Canadian General Standards Board | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | NFPA 58 | 1979 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-1 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 1: Hoop-wrapped composite gas cylinders | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | NB-23 | 1992 | National Board Inspection Code | National Board of Boiler and Pressure Vessel Inspectors | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 588 | 1981 | High-Strength Low-Alloy Structural Steel with 50 ksi Minimum Yield Point to 4 inches Thick | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 3574 | 1986 | Cold-Reduced Carbon Steel Sheet of Commercial and Drawing Qualities | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. 106-6 | 1993 | Excess Flow Valve with Removable Baskets | Chlorine Institute, Inc. | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-11 | 2001 | Recommended Practice for Inspection of Compressed Gas Cylinders at Time of Manufacture | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 370 | 1994 | Standard Test Method and Definitions for Mechanical Testing of Steel Products | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 606 | 1975 | Steel Sheet and Strip, Hot-Rolled and Cold-Rolled, High Strength, Low Alloy, with Improved Atmospheric Corrosion Resistance | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA C-14 | 1979 | Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 8115 | 1986 | Cotton Bale--Dimensions and Density | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA C-7 | 2004 | A Guide for the Preparation of Precautionary Markings for Compressed Gas Containers, Appendix A, 6th Edition | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASHRAE 15 | 1994 | Safety Code for Mechanical Refrigeration | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM E 112 | 1988 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 7225 | 2005 | Gas Cylinders--Precautionary Labels | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2004 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10461 | 2005 | Gas cylinders--Seamless aluminum alloy gas cylinders--Periodic inspection and testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-2 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(j)(1) | AWS B3.0 | 1972 | Standard Qualification Procedure | American Welding Society | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.8 | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.8 | NIST Handbook H-28 | 1966 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.8 | ICAO Publication | 2005 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Research and Special Programs Administration | 49 CFR 171.8 "Liquid" | ASTM D 4359 | 1990 | Standard Test Method for Determining Whether a Material is a Liquid or a Solid | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.8 "Viscous liquid" | ASTM D 445 | 1972 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.8 "Viscous liquid" | ASTM D 1200 | 1970 | Viscosity by Ford Viscosity Cup | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.8, Large packaging (5) | UN Publication | 2019 | UN Recommendations, Chapter 6.6 | United Nations | |
Transportation Department | 85 FR 27810 | 49 CFR 172 | TDG SOR/2017–137 | 2017 | Hazardous Materials: Harmonization With International Standards | Canadian Department of Transportation, Transport Canada |
Transportation Department | 87 FR 79752 | 49 CFR 172 | ISO 4706:2008(E) | 2008 | Hazardous Materials: Editorial Corrections and Clarifications | International Organization for Standardization |
Transportation Department | 87 FR 44944 | 49 CFR 172 | ISO 10462:2013 | 2013 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 85 FR 27810 | 49 CFR 172 | TDG SOR/2017–253 | 2017 | Hazardous Materials: Harmonization With International Standards | Canadian Department of Transportation, Transport Canada |
Transportation Department | 87 FR 44944 | 49 CFR 172 | ISO 11114–1:2012/Amd 1:2017(E) | 2012 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 85 FR 27810 | 49 CFR 172 | ISO 11118:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 87 FR 44944 | 49 CFR 172 | ISO 11119–1:2012(E) | 2012 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 85 FR 27810 | 49 CFR 172 | ISO 11120:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 87 FR 79752 | 49 CFR 172 | ATAA 300 | 1996 | Hazardous Materials: Editorial Corrections and Clarifications | Air Transport Association of America |
Transportation Department | 87 FR 44944 | 49 CFR 172 | ISO 11119–2:2012(E) | 2012 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 87 FR 79752 | 49 CFR 172 | ISO 4706:2008(E) | 2008 | Hazardous Materials: Editorial Corrections and Clarifications | International Organization for Standardization |
Transportation Department | 84 FR 8006 | 49 CFR 172 | PHMSA HMR : lithium cells and batteries transported by aircraft | 2019 | Hazardous Materials: Enhanced Safety Provisions for Lithium Batteries Transported by Aircraft (FAA Reauthorization Act of 2018) | U.S. Department of Transportation |
Transportation Department | 85 FR 27810 | 49 CFR 172 | ISO 11623:2015 | 2015 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 87 FR 44944 | 49 CFR 172 | ISO 11119–2:2012/Amd.1:2014(E) | 2012 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 85 FR 27810 | 49 CFR 172 | ISO 14246:2014(E) | 2014 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 85 FR 44994 | 49 CFR 172 | AAR M–1002 | 2014 | Hazardous Materials: Liquefied Natural Gas by Rail | Association of American Railroads |
Transportation Department | 87 FR 44944 | 49 CFR 172 | ISO 11119–3:2013(E) | 2013 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Transportation Department | 87 FR 79752 | 49 CFR 172 | ISO 4706:2008(E) | 2008 | Hazardous Materials: Editorial Corrections and Clarifications | International Organization for Standardization |
Transportation Department | 85 FR 27810 | 49 CFR 172 | ISO 16148:2016(E) | 2016 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |