DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 434.701.1 RS-42 | ANSI Z21.66 | 1996 | Automatic Vent Damper Devices for Use with Gas-Fired Appliances (RS-42) | American National Standards Institute | |
Energy Department | 10 CFR 434.701.1 RS-43 | NEMA MG-10 | 1994 | Energy Management Guide for Selection and Use of Polyphase Motors (RS-43) | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 434.701.1 RS-44 | NEMA MG-11 | 1993 | Energy Management Guide for Selection and Use of Single-Phase Motors (RS-44) | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 434.701.1 RS-45 | ARI 330 | 1993 | Ground-Source Closed-Loop Heat Pumps (RS-45) | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 434.701.1 RS-46 | ARI 560 | 1992 | Absorption Water-Chilling and Water Heating Packages (RS-46) | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 434.701.1 RS-47 | ASHRAE Handbook | 1995 | HVAC Systems and Applications (RS-47) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Energy Department | 10 CFR 434.701.1 RS-5 | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (RS-5) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-6 | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (RS-6) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-7 | ASTM C 236 | 1993 | Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-8 | ASTM C 976 | 1990 | Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (RS-8) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-9 | LTH Report TVAHB-3007 | 1981 | Thermal Bridges in Sheet Metal Construction (RS-9) | Lund Institute of Technology | |
Energy Department | 87 FR 19595 | 10 CFR 435 | ICC 2021 | 2021 | Energy Efficiency Standards for the Design and Construction of New Federal Low-Rise Residential Buildings Baseline Standards Update | International Energy Conservation Council |
Energy Department | 10 CFR 435.2 | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.2 | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.3(b)(1) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.3(b)(2) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(1)(i) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(1)(ii) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(2)(i) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(2)(ii) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.5(a) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.5(b) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 440 Appendix A | UL 507 | 1990 | Ventilation fans: Including Electric Attic, Ceiling, and Whole House Fans | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 549 | 1986 | Perlite Loose Fill Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 728 | 1989 | Standard Specification for Perlite Insulation Board | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 764 | 1988 | Insulation, Loose-Fill Mineral Fiber | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME CSD-1 | 1988 | Controls and Safety Devices for Automatically Fired Boilers | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 591 | 1985 | Rigid Preformed Polyurethane Insulation Board | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ANSI Z21.8 | 1984 | Gas Conversion Burners | American National Standards Institute | |
Energy Department | 10 CFR 440 Appendix A | UL 296 | 1989 | Oil Burners | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 726 | 1988 | Standard Specification for Mineral Fiber and Roof Insulating Board | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM D 4099 | 1989 | Standard Specification for Poly Vinyl Chloride (PVC) Prime Windows/Sliding Glass Doors | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | AGA 3 | 1980 | Requirements for Gas Connectors for Connection of Fixed Appliances for Outdoor Installation, Park Trailers and Manufactured (Mobile) Homes to the Gas Supply | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | UL 507 | 1990 | Ventilation fans: Including Electric Attic, Ceiling, and Whole House Fans | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 440 Appendix A | AHAM RAC-1 | 1982 | Room Air Conditioners | Association of Home Appliance Manufacturers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 834 | 1986 | Latex Sealing Compounds | ASTM International | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 208 | 1982 | Insulating Board (Cellulosic Fiber), Structural and Decorative | ASTM International | |
Coast Guard | 10 CFR 440 Appendix A | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 592 | 1980 | Blanket Insulation and Blanket Type Pipe Insulation (Metal-mesh Covered) (Industrial Type) | ASTM International | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 591 | 1985 | Rigid Preformed Polyurethane Insulation Board | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | UL 727 | 1991 | Oil-Fired Central Furnaces | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 440 Appendix A | ASTM D 3678 | 1988 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 739 | 1988 | Cellulose Loose- fill Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section X | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM D 3678 | 1988 | Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay | ASTM International | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section X | American Society of Mechanical Engineers |