This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (49) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 4500-SiO2 E | 1992 | Automated Method for Molybdate-Reactive Silica | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(ii) | ASTM D 1826 | 2003 | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Federal Communications Commission | 47 CFR 2.950(c) | ISO/IEC 17011 | 2004 | Conformity assessment—General requirements for accreditation bodies accrediting conformity assessment bodies | International Organization for Standardization | |
Public Health Service | 42 CFR 84.79(c) | CGA G-7.1 | 1966 | Commodity Specification for Air | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 572.144(a) | Drawing No. 210-3000 | 2001 | Upper/Lower Torso Assembly | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM F 478-09 | 2009 | Standard Specification for In-Service Care of Insulating Line Hose and Covers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(8)(i) | AAI-RMA Publication | 2013 | Specifications for Anhydrous Ammonia Hose | Agriculture Ammonia Institute-Rubber Manufacturers Association | |
Food and Drug Administration | 21 CFR 184.1063(b)(8) | FDA Publication | 1985 | Determination of Lysolecithin Content of Enzyme-Modified Lecithin, Method I | Food and Drug Administration, U.S. Department of Health and Human Services | |
National Highway Traffic Safety Administration | 29 CFR 1918.103(b)(2) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xxiii) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section XI, Appendix VIII and the supplements to Appendix VIII and Article I-3000 of Section XI of 2002 Addenda through the latest edition and addenda | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 154.812(b)(6) | IEC 309-2 | 1981 | Plugs, Socket-Outlets and Couplers for Industrial Purposes: Part 2, Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 63.14(g)(13) | ASTM D 1835 | 2005 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Coast Guard | 46 CFR 154.1400(a)(6) | ANSI Z89.1 | 1969 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | HP-SG-96 | 1996 | Structural Design Guide for Hardwood Plywood Wall Panels--HPVA Design Guide | Hardwood Plywood and Veneer Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.3 | ASTM D 3792 | 1979 | Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (6) Beryllium | APHA Method 3120 B | 1992 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 40 CFR 136.3(a) Table IG (Carbaryl [Sevin]) | EPA Method 553 | 1992 | Determination of Benzidines and Nitrogen-Containing Pesticides in Water by Liquid-Liquid Extraction or Liquid-Solid Extraction and Reverse Phase High Performance Liquid Chromatography/Particle Beam/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.5089(h)(2) | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 385.4(b)(1) | CVSA Publication | 2013 | North American Standard Out-of-Service Criteria and Level VI Inspection Procedures and Out-of-Service Criteria (shaded items) for Commercial Highway Vehicles Transporting Transuranics and Highway Route Controlled Quantities of Radioactive Materials | Commercial Vehicle Safety Alliance | |
Coast Guard | 46 CFR 197.300(c) | ASME PVHO-1 | 2000 | Safety Standard for Pressure Vessels for Human Occupancy | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 42 CFR 482.41(b)(9)(iv) | NFPA 101 | 2000 | Life Safety Code, as amended by NFPA Temporary Interim Amendment 00-1(101) | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | APHA Method 4500-NH3 F | 1992 | Ammonia Nitrogen by Ion Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 52 | EPA Method 335.4 | 1995 | Determination of Total Cyanide by Semi-Automated Colorimetry, Revision 1.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 282.81(d)(1)(i)(B) | NMUSTP | 1995 | New Mexico Regulatory Requirements Applicable to the Underground Storage Tank Program | State of New Mexico | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.3 | ASTM D 4177 | 2000 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.105 S6.9.2(b) | ASTM E 1337 | 2008 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire | ASTM International | |
Coast Guard | 46 CFR 160.151-5(d)(2) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 160.176-8(k) | IMO SOLAS | 1983 | 1983 Amendments to the International Convention for the Safety of Life at Sea, 1974 | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 172.407(f) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(9) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM D 240 | 2009 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (3) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Labor Department | 41 CFR 50-204.69 | CGA G-8.1 | 1964 | Standard for the Installation of Nitrous Oxide Systems at Consumer Sites | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(3)(i) | EPA Method 552.1 | 1992 | Determination of Haloacetic Acids and Dalapon in Drinking Water by Ion Exchange Liquid-Solid Extraction and Gas Chromatography with Electron-Capture Detection | U.S. Environmental Protection Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.209(m) | CGA C-6.1 | 1995 | Standard for Visual Inspection of High Pressure Aluminum Compressed Gas Cylinders | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9045D | 2004 | Soil and Waste pH | U.S. Environmental Protection Agency | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 780.25(a)(4) | USDA Technical Release 210-VI-TR60 | 2005 | Earth Dams and Reservoirs | Soil Conservation Service, U.S. Department of Agriculture | |
Energy Department | 10 CFR 430.3(c)(7) | ANSI C78.375 | 1997 | American National Standard for Fluorescent Lamps—Guide for Electrical Measurements | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 1654 | 1992 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Tert-butyl-alcohol) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.704(a) | EPA Method 1623 | 2005 | Cryptosporidium and Giardia in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 431.15(e)(2)(iv) | ISO/IEC Guide 28 | 1990 | General rules for a model third-party certification system for products | International Organization for Standardization / International Electrotechnical Commission | |
Food and Drug Administration | 21 CFR 102.23(c)(4) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(32) | ASTM D 5186 | 2009 | Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | HUD Handbook 4930.2 | 1989 | HUD Intermediate Minimum Property Standards Supplement, Solar Heating and Domestic Hot Water Systems | U.S. Department of Housing and Urban Development | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(4) | Drawing No. 78051-243 | 1996 | Washer | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1755.390(i)(5)(v)(A) | ASTM B 193 | 1987 | Standard Test Method for Resistivity of Electrical Conductor Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (87) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Toluene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency |