This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(d) | ASTM D 240 | 2009 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Food and Drug Administration | 21 CFR 135.130(c)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1926.900(k)(5) | IME Publication 20 | 1971 | Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps | Institute of Makers of Explosives | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.5 | ASTM D 2622 | 1998 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1803-01 Rated Power | SAE J-1349 | 2011 | Power Test Code—Spark Ignition and Compression Ignition—As Installed Net Power Rating | Society of Automotive Engineers | |
Health and Human Services Department | 45 CFR 162.920(a)(7) | ASC X12N 278 | 2000 | Health Care Services Review—Request for Review and Response, Version 4010 | Washington Publishing Company | |
Environmental Protection Agency | 40 CFR 86.157-98(f)(3) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart V | 1989 | Administrative Code | State of Illinois | |
National Highway Traffic Safety Administration | 49 CFR 571.403 S6.3.1 | ASTM B 456 | 1995 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium | ASTM International | |
Rural Utilities Service | 7 CFR 1755.97(b)(13) | RUS Bulletin 1728F-700 | 2011 | Specification for Wood Poles, Stubs and Anchor Logs | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 10.225(b)(3)(iv) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 042 | 1976 | Upper Arm Assembly Right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (52) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 164.74(a)(3)(ii) | CIA 3 | 1980 | Standard Test Methods for Fiber Rope Including Standard Terminations | Cordage Institute | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(4)(i) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926 Subpart M Appendix E (IV)(A)(6) | ANSI A10.14 | 1991 | Construction and Demolition Operations—Requirements for Safety Belts, Harnesses, Lanyards and Lifelines for Construction and Demolition Use | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (55) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(b)(2) | DOE HASL-300 | 1973 | DOE EML Procedures Manual | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 60.105a(g)(4) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | EPA Method 245.1 | 1994 | Mercury by Cold Vapor Atomic Absorption | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 58 Appendix A, 2.1.1 | EPA-240-B-01-002 | 2001 | EPA Requirements for Quality Management Plans, EPA QA/R-2 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 80.2(z)(1), Aromatic content | ASTM D 1319 | 2013 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.75(a) | Drawing No. SA 106C 060 | 1997 | Pelvis Assembly, Revision A | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(A) | AOAC Method 920.203 | 1998 | Manganese in Water by Persulfate Method | AOAC International | |
Food and Drug Administration | 21 CFR 701.3(c)(2)(iv) | Food Chemicals Codex | 1972 | Food Chemicals Codex, 2nd Edition | National Academy Press | |
Coast Guard | 46 CFR 116.300(b)(1)(i) | ABS Publication | 1975 | Rules for Building and Classing Aluminum Vessels | American Bureau of Shipping | |
Mine Safety and Health Administration | 30 CFR 77.403-1(e)(1) | CA State Regulations | 2013 | CAAC Title 8, Article 7, Section 5243, Logging and Sawmill Safety Orders, Tractor Yarding | State of California, Administrative Code | |
Coast Guard | 46 CFR 147.45(f)(4) | UL 1185 | 1984 | Standard for Portable Marine Fuel Tanks | Underwriters Laboratories, Inc. | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 53/A 53M | 2004 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Coast Guard | 46 CFR 109.573(b)(1) | NFPA 306 | 1974 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 1.8(b) | EPA Method 0023A | 1996 | Sampling Method for Polychlorinated Dibenzo-p-dioxins and Polychlorinated Dibensofuran Emmissions from Stationary Sources | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.41(a) | FMVSS 105 | 1998 | Hydraulic and Electric Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 53.01-10(c)(1) | UL 174 | 1996 | Standard for Household Electric Storage Tank Water Heaters, Tenth Edition, (Revisions through and including Nov. 10, 1997) | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (46) | APHA Method 4500-O D | 2001 | Oxygen, dissolved, mg/L, Permanganate Modification | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 173.315(k)(3) | ASME B&PV Code | 1986 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 114.90(a)(4)(ii) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Energy Department | 10 CFR 431.86(c)(1)(i) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Coast Guard | 46 CFR 160.151-21(y)(2) | ISO 18813:2006(E) | 2006 | Ships and marine technology—Survival equipment for survival craft and rescue boats, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 1048.810(c)(2) | ISO 14230-4 | 2000 | Road vehicles—Diagnostic systems—Keyword Protocol 2000—Part 4: Requirements for emission-related systems | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 633.1 | 1993 | Neutral Nitrogen Containing Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 435.11(gg) | EPA Method 1619 | 2015 | Suspended Particulate Phase (SPP) Toxicity Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.613(e)(3)(iii)(C) | ASTM E 29 | 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (n-Hexane) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2850 | RMIUIC regulations | 2014 | State-administered program (Reserved) | Trust Territory of the Pacific, Republic of the Marshal Islands | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4160 | 1982 | Specification for Reinforced Thermosetting Resin Pipe (RTRP) Fittings for Nonpressure Applications (Withdrawn 1989) | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(8)(i) | EPA-600-4-79-020 | 1983 | Method 239.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 164.015-1(a)(2) | FedSpec C-C-91D | 1983 | Candle, Illuminating | Federal Specifications Standards and Test Methods |