This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Rural Utilities Service | 7 CFR 1755.390(i)(5)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1728.97(a)(4) | RUS Bulletin 50–19 (DT–7) | 1953 | RUS Specification for Clevis Bolts | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.405(b)(3) | IEEE 743 | 1984 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
Rural Utilities Service | 7 CFR 1755.860(b)(11)(i) | ASTM D 1238 | 1990 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Rural Utilities Service | 7 CFR 1755.702(g)(5) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(i)(2) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 21 CFR 177.1040(c) Footnote 1 | FDA Publication | 1989 | Procedure for the Determination of Molecular Weights of Acrylonitrile/Styrene Copolymers | Food and Drug Administration, U.S. Department of Health and Human Services | |
Rural Utilities Service | 7 CFR 1755.910(g)(2)(i)(B) | ASTM B 117 | 1990 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(ix) | ASTM B 633 | 1985 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel | ASTM International | |
Rural Utilities Service | 7 CFR 1755.506(a) | 7 CFR 1755.701 | 1989 | Scope | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.506(bb) | 7 CFR 1755.510 | 2012 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1728.201(f)(2) | ANSI O5.2 | 2006 | Standard for Wood Products, Structural Glued Laminated Timber for Utility Structures | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1728.202(f)(1) | AWPA M2 | 2007 | Standard for Inspection of Treated Timber Products | American Wood Protection Association | |
Rural Utilities Service | 7 CFR 1755.390(k)(1) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1728.97(a)(19) | RUS Bulletin 50–74 (U–6) | 1979 | RUS Specification for Secondary Pedestals (600 Volts and Below) | Rural Utilities Service, U.S. Department of Agriculture | |
Rural Utilities Service | 7 CFR 1755.405(g)(4) | IEEE 743 | 1984 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(ii) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Rural Utilities Service | 7 CFR 1755.703(c)(6)(iii) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.870(g)(3)(i) | ASTM D 2287 | 1988 | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(i)(9) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.903(a)(5) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | Insulated Cable Engineers Association | |
Rural Utilities Service | 7 CFR 1755.902(a)(4) | IEEE C2 | 2007 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Rural Utilities Service | 7 CFR 1755.910(e)(3)(vi) | ASTM B 117 | 1990 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(47) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Working Stress Design, Twenty-first Edition, December 2000; Errata and Supp 1, December 2002; Errata and Supp 2, September 2005; Errata and Supp 3, October 2007 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(8) | ANSI Z88.2 | 1992 | Respiratory Protection | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(23) | NACE MR-0175 | 2003 | Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment | National Association of Corrosion Engineers | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(a)(1) | ACI Standard 318-95 | 1995 | Building Code Requirements for Reinforced Concrete | American Concrete Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(55) | API MPMS | 1998 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.800(b) | API RP 14J | 2001 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(13) | API RP 2T | 1997 | Planning, Designing and Constructing Tension Leg Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(27) | API MPMS | 2005 | Chapter 9, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(7) | API MPMS | 1994 | Chapter 1—Vocabulary | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(71) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(12) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 81 FR 61934 | 30 CFR 250.874(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(ii) | ANSI/API Spec. 16A | 2004 | Specification for Drill-through Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(10) | API RP 2RD | 2006 | Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.446(a) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(11) | API MPMS | 2003 | Chapter 4, Section 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(23) | API MPMS | 2005 | Chapter 5—Metering | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(87) | ANSI/API Spec. 14A | 2005 | Specification for Subsurface Safety Valve Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.833 | API Spec. 6AV1 | 2013 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(72) | ISO 14313:2007 | 2007 | Petroleum and natural gas industries—Pipeline transportation systems—Pipeline valves | International Organization for Standardization | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(36) | API MPMS | 2002 | Chapter 11, Section 2, Part 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(i)(1) | ASTM C 33 | 2007 | Standard Specification for Concrete Aggregates | ASTM International | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(39) | API MPMS | 1980 | Chapter 11.1—Volume Correction Factors, Volume 1, Table 5A—Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 °F, and Table 6A—Generalized Crude Oils and JP-4 Correction of Volume to 60 °F Against API Grav... | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(g)(1) | ASTM C 33-07 | 2007 | Standard Specification for Concrete Aggregates | ASTM International |
Safety and Environmental Enforcement Bureau | 30 CFR 250.851(a)(1)(i) | ANSI/ASME BPVC | 2019 | Boiler and Pressure Vessel Code | American Society of Mechanical Engineers |