Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
Accessing Standards Incorporated by Reference
This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
| Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Coast Guard | 46 CFR 160.156-5(d)(2) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
| Coast Guard | 46 CFR 160.171-3(b) | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
| Coast Guard | 46 CFR 160.055-1(a)(1) | MIL-W-17337D | 1998 | Webbing, Woven, Nylon | U.S. Department of Defense | |
| Coast Guard | 46 CFR 182.440 Table 182.440(a)(1) | ASTM B 152 | 1997 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
| Coast Guard | 46 CFR 160.170-5(b)(1) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural | ASTM International | |
| Coast Guard | 46 CFR 162.060-5(d)(1) | EPA-600-R-10-146 | 2010 | Generic Protocol for the Verification of Ballast Water Treatment Technologies, version 5.1 | U.S. Environmental Protection Agency | |
| Coast Guard | 46 CFR 111.105-31(n)(2) | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
| Coast Guard | 46 CFR 164.120-5(d)(1) | ISO 62:2008(E) | 2008 | Plastics—Determination of water absorption, Third Edition | International Organization for Standardization | |
| Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 2007.0 | 2002 | Methods for Measuring Acute Toxicity to Freshwater and Marine Organisms, Mysid, Americamysis bahia, acute | U.S. Environmental Protection Agency | |
| Coast Guard | 46 CFR 110.10-1(o)(1) | UL 44 | 2002 | Standard for Thermoset-Insulated Wire and Cable | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 125.180(b) | ABYC E-8 | 1994 | Alternating-Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
| Coast Guard | 46 CFR 164.120-7, Table 156.120-7(d)(4)(i) | ASTM D 543 | 2006 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents | ASTM International | |
| Coast Guard | 40 CFR 60.335(a)(3) | EPA Method 3A | 2014 | Determination of Oxygen and Carbon Dioxide Concentrations in Emissions From Stationary Sources (Instrumental Analyzer Procedure) | U.S. Environmental Protection Agency | |
| Coast Guard | 33 CFR 154, Appendix C, 6.3 | ASTM F 631 | 1993 | Standard Guide for Collecting Skimmer Performance Data in Controlled Environments | ASTM International | |
| Coast Guard | 46 CFR 169.115(c)(5) | UL 19 | 1978 | Woven Jacketed, Rubber Lined Fire Hose | Underwriters Laboratories, Inc. | |
| Coast Guard | 40 CFR 136.3(a) Table IB (30) | HCC Method 8008 | 1980 | 1, 10--Phenanthroline Method Using FerroVer Iron Reagent for Water | Hach Chemical Company | |
| Coast Guard | 46 CFR 114.600(b) | UL 1574 | 1995 | Track Lighting Systems | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 148.15(d) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
| Coast Guard | 46 CFR 182.420(e)(3) | ABYC P-4 | 1989 | Marine Inboard Engines | American Boat and Yacht Council | |
| Coast Guard | 46 CFR 56.30-5(b)(3) | ASME B16.25 | 2003 | Buttwelding Ends | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 175.600(b) Table | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements | International Maritime Organization | |
| Coast Guard | 33 CFR 154.106(d)(7) | ASTM F 1737 | 2007 | Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems | ASTM International | |
| Coast Guard | 40 CFR 136.3(a) Table IB (35) | EPA Method 1631 | 2004 | Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, EPA-821-R-02-019. Revision E | U.S. Environmental Protection Agency | |
| Coast Guard | 46 CFR 160.005-4(b) | Drawing No. 160.005-1 (Sheet 4) | 2012 | Cutting Pattern and General Arrangement (Child) | U.S. Coast Guard | |
| Coast Guard | 46 CFR 111.105-15(b) | IEC 79-6 | 1995 | Electrical Apparatus for Explosive Gas Atmospheres | International Electrotechnical Commission | |
| Coast Guard | 46 CFR 52.01-95(f) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 11 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 108.101(b) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
| Coast Guard | 33 CFR 127.005, Definitions--Fire Endurance Rating | NFPA 251 | 1990 | Standard Methods of Fire Tests for Building Construction and Materials | National Fire Protection Association | |
| Coast Guard | 46 CFR 119.320(a)(3) | UL 174 | 1989 | Household Electric Storage Tank Water Heaters | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 160.055-3(c) | FedSpec CCC-C-426D | 1995 | Cloth, Drill, Cotton | Federal Specifications Standards and Test Methods | |
| Coast Guard | 46 CFR 111.60-5(a)(2) | IEC 60092-352 | 1997 | Electrical Installation in Ships—Choice and Installation of Cables for Low-Voltage Power Systems, Second Edition | International Electrotechnical Commission | |
| Coast Guard | 46 CFR 97.01-2(b) | IMO Resolution A.654(16) | 1989 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
| Coast Guard | 27 CFR 21.69(a) | National Formulary | 1980 | Formula No. 39 | U.S. Pharmacopeial Convention | |
| Coast Guard | 46 CFR 56.01-2(d)(22) | ASME B16.42 | 1998 | Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 160.077-17(b)(9) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 108.645(a)(4) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
| Coast Guard | 36 CFR 1237.18(c) | ISO 18925 | 2002 | Imaging Materials--Optical Disc Media--Storage | International Organization for Standardization | |
| Coast Guard | 46 CFR 31.10-1(a) | ABS Publication | 2013 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
| Coast Guard | 46 CFR 160.132-5(c)(4) | IMO MSC/Circular 980 | 2001 | Standardized Life-Saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
| Coast Guard | 46 CFR 160.151-27(c)(1) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
| Coast Guard | 40 CFR 444.12(b)(1) Table (7) | APHA Method 3112 B | 1999 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association | |
| Coast Guard | 46 CFR 160.076-37(b) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
| Coast Guard | 46 CFR 160.135-5(f)(1) | MilSpec A-A-55308 | 1997 | Commercial Item Description, Cloth And Strip, Laminated Or Coated, Vinyl Nylon Or Polyester, High Strength, Flexible | U.S. Department of Defense | |
| Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 135 | 1997 | Standard Specification for Electric-Resistance-Welded Steel Pipe | ASTM International | |
| Coast Guard | 46 CFR 111.33-11 | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
| Coast Guard | 46 CFR 160.041-2(a) | FedSpec GG-K-391 | 1954 | Kits (Empty), First Aid, Burn Treatment and Snakebite: and Kit Contents | Federal Specifications Standards and Test Methods | |
| Coast Guard | 46 CFR 160.151-15(o) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
| Coast Guard | 46 CFR 160.151-21(c) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
| Coast Guard | 46 CFR 56.50-105 Table | ASTM A 312/A 312M | 1995 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipe | ASTM International |