This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.164(a)(5) | ASTM D 4814 | 1995 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(2)(i) | SAE J-1063 | 1993 | Cantilevered Boom Crane Structures--Method of Test | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (62) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 619 | 1993 | Triazine Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1806-05(j)(1) | California Regulatory Requirements | 2003 | Approved on April 21, 2003, Title 13, California Code of Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD-II) | California Air Resources Board | |
Nuclear Regulatory Commission | 10 CFR 73.50(d)(1) | FedSpec W-A–00450 B | 1973 | Alarm Systems, Interior, Security, Components for | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (1,2-Dichloroethane) | EPA Method 502.2 | 1995 | Volatile Organic Compounds (Drinking Water) by GC/PID/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.950(a)(3)(v) | LAUIC regulations | 1983 | Amendment to Statewide Order No. 29-B (Amendment concerning the offsite disposal of drilling mud and saltwater) (effective May 20, 1983) | State of Louisiana | |
Environmental Protection Agency | 40 CFR 63.11237 Residual oil | ASTM D 396 | 2010 | Standard Specification for Fuel Oils | ASTM International | |
Food and Drug Administration | 21 CFR 150.160(d)(5) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-386 | 1969 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (38) | AOAC Method 973.50 | 1990 | Nitrogen (Nitrate) in Water - Brucine Colorimetric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM E 258 | 1967 | Standard Test Method for Total Nitrogen Inorganic Material by Modified Kjeldahl Method | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | EPA Method 206.5 | 1978 | Arsenic Digestion | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.36(e)(2)(x) | ASTM D 7459 | 2008 | Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources | ASTM International | |
Coast Guard | 46 CFR 54.10-5(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (48) | EPA Method 420.1 | 1978 | Phenolics, Total Recoverable (Spectrophotometric, Manual 4-AAP with Distillation) | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0020 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (32) | ASTM D 3559A | 2008 | Standard Test Methods for Lead in Water, Atomic Absorption, Direct | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S4.13 | SAE J-211/1 | 1995 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 549 | 1986 | Perlite Loose Fill Insulation | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.55(d)(2) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.151-15(m) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(36) | ASTM D 5599 | 2010 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table Note 3 | ASTM Annual Book of Standards | 2004 | Water and Environmental Technology, Section 11.01 | ASTM International | |
Environmental Protection Agency | 40 CFR 61.18(a)(8) | ASTM D 2504 | 1977 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(j)(2) | USDOC Publication | 1977 | Model Performance Criteria for Structural Fire Fighters' Helmets | U.S. Department of Commerce | |
Federal Aviation Administration | 14 CFR 121.345(c)(2)(i) | FAA TSO-C74c | 1973 | Airborne ATC Transponder Equipment | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 4500-SiO2 F | 1995 | Flow Injection Analysis for Molybdate-Reactive Silicate | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.251(q) Subbituminous coal | ASTM D 388 | 1990 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.869(c) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.134(i)(1)(ii) | CGA G-7.1 | 1989 | Commodity Specification for Air | Compressed Gas Association | |
Mine Safety and Health Administration | 30 CFR 57.6201(a)(2) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Coast Guard | 33 CFR 183.5(b) | ASTM D 1622 | 1993 | Standard Test Method for Apparent Density of Rigid Cellular Plastics | ASTM International | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 816.49(a)(6)(i) | USDA Technical Release 210-VI-TR60 | 1985 | Earth Dams and Reservoirs | Soil Conservation Service, U.S. Department of Agriculture | |
Coast Guard | 21 CFR 101.81(c)(2)(ii)(A) | AOAC Official Methods | 1995 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 195.3(c) E6 | ASTM A 672 | 2001 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(a)(6) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.358-3(a) | DOE CAPE–1662 | 1988 | Civilian Application Program Engineering Drawings, Revision 1 and Supplement 1 | U.S. Department of Energy | |
Coast Guard | 46 CFR 13.507 | IMO Resolution A.437 (XI) | 1979 | Training of Crews in Fire Fighting | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(5) | Drawing No. SA 150 M060 | 1994 | Pelvis and Abdomen Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Labor Department | 41 CFR 50-204.2(a)(3) | 49 CFR 175 | 2014 | Carriage by Aircraft | U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 173.420(a)(1) | ANSI N14.1 | 1971 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Coast Guard | 46 CFR 56.01-2(k)(11) | MSS SP-67 | 1995 | Butterfly Valves | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Environmental Protection Agency | 40 CFR 91.104(a) | SAE J-1228 | 1991 | Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 9060A | 2004 | Total Organic Carbon | U.S. Environmental Protection Agency | |
Homeland Security Department | 6 CFR 37.17(e)(1) | ISO/IEC 19794-5:2005(E) | 2005 | Information technology—Biometric Data Interchange Formats—Part 5: Face Image Data | International Organization for Standardization / International Electrotechnical Commission | |
Federal Aviation Administration | 14 CFR 71.33(c) | FAA Order 7400.9X | 2013 | Airspace Designations and Reporting Points | Federal Aviation Administration, U.S. Department of Transportation |