This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.051-7(j) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances, pages 79-254 | International Maritime Organization | |
Rural Utilities Service | 7 CFR 1728.202(a) | RUS Bulletin 1728F-700 | 1993 | RUS Specification for Wood Poles, Stubs and Anchor Logs | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.1 | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.133(b) | Drawing No. SA-572-S4 | 1987 | Accelerometer Specification | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (DCPA [Dimethyl 2,3,5,6-tetrachloro-terephthalate]) | EPA Method 515.1 | 1995 | Chlorinated acids Liquid/Liquid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 266.104(e)(1) | EPA SW-846 | 2014 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.151 Table A | Drawing No. 921022-054R | 2001 | Arm Assembly, Right | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1728.97(e)(9) | AWPA M3 | 2005 | Standard Quality Control Procedures for Wood Preserving Plants | American Wood Protection Association | |
Energy Department | 10 CFR 431.66(d)(2)(iii) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
Rural Utilities Service | 7 CFR 1728.97(a)(6) | RUS Bulletin 50–31 (D–3) | 1979 | RUS Specification for Pole Top Pins | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 571.3(b), 95th percentile adult male | USPHS Publication 1000, Series 11, No. 8 | 1965 | Weight, Height, and Selected Body Dimensions of Adults | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 56.70-15(g)(7) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 90, Subpart D, Appendix A, Table 3 | ASTM D 3231 | 1989 | Standard Test Method for Phosphorous in Gasoline | ASTM International | |
Rural Utilities Service | 7 CFR 1728.202(b)(5) | RUS Bulletin 1728H-701 | 1993 | RUS Specification for Wood Crossarms (Solid and Laminated), Transmission Timbers and Pole Keys | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 160.156-7(b)(7)(i) | IMO MSC/Circular 980 | 2001 | Standardized Life-saving Appliance Evaluation and Test Report Forms | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(18) | ASTM D 93 | 2008 | Test for Flash Point by Pensky Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 101, 7.1.1 | ASTM D 1193 | 1991 | Standard Specification for Reagent Water | ASTM International | |
Federal Railroad Administration | 49 CFR 229.205(b) | AAR S-580 | 2005 | Locomotive Crashworthiness Requirements | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (10) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.852(a)(4) | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 3, 4 | ISO 50001 | 2008 | Energy management | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 172.102 code/special provisions 52 | Manual of Tests and Criteria | 2019 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Minerals Management Service | 30 CFR 250.1920(a) | COS Safety Publication COS-2-03 | 2012 | Requirements for Third-party SEMS Auditing and Certification of Deepwater Operations, First Edition | Center for Offshore Safety | |
Housing and Urban Development Department | 24 CFR 3280.704(b)(5)(i) | NFPA 58 | 2001 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.5(a) | Drawing No. SA 150 M071 | 1970 | Left arm assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 21 CFR 177.1590(c) | ASTM D 968 | 1981 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Falling Abrasive Tester | ASTM International | |
Housing and Urban Development Department | 24 CFR 100.205(e)(2)(iii) | ICC CRHA | 2000 | ICC Code Requirements for Housing Accessibility (CRHA) | International Code Council | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (5) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (2,4-D (as acids, salts, and esters)) | EPA Method 515.4 | 2000 | Determination of Chlorinated Acids in Drinking Water by Liquid-Liquid Microextraction, Derivitization, and Fast Gas Chromatography with Electron Capture Detection, Revision 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.485(g)(5) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | HPVA All Standards | 2013 | All specifications, standards and codes without specific reference | Hardwood Plywood and Veneer Association | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(2) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(14) | ASME B16.21 | 2005 | Nonmetallic Flat Gaskets for Pipe Flanges | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.14(g)(43) | ASTM D 3912 | 1980 | Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(59) | API RP 14FZ | 2007 | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
Coast Guard | 46 CFR 154.440(c) | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3, Footnote 1 | EPA SW-846 | 1996 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 172.665(d)(2) | Food Chemicals Codex | 1996 | Gellan Gum | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(vii) | AOCS Method Cd 8-53 | 1992 | Peroxide Value, Acetic Acid -- Chloroform Method | American Oil Chemists Society | |
Food and Drug Administration | 21 CFR 177.1210(b)(5) | ASTM D 1646 | 1981 | Standard Test Method for Rubber--Viscosity and Vulcanization Characteristics (Mooney Viscometer) | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(c)(7) | AOAC Method 978.01 | 1995 | Phosphorus (Total) in Fertilizers, Automated Method, Sixteenth edition | AOAC International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note 1 | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5089(j) Table 3, B | ASTM E 1720 | 2001 | Standard Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO2 Production Test | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.2 | ASTM D 5865 | 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM E 96 | 1990 | Standard Test Methods for Water Vapor Transmission of Materials | ASTM International | |
Coast Guard | 46 CFR 119.440(a)(2)(i) | ASTM D 635 | 1997 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 79a | 1982 | Acrylonitrile Butadiene Styrene (ABS) and Poly Vinyl Chloride (PVC) Plastic Drain, Waste and Vent Pipe and Fittings | U.S. Department of Housing and Urban Development | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.171 Table A (iv) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation |