This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Communications Commission | 47 CFR 2.948(b)(8)(ii) | ANSI C63.4 | 1992 | Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | American National Standards Institute | |
Coast Guard | 46 CFR 182.130 | ABYC H-25 | 1994 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.17(g)(182) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.415(e) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells | American Petroleum Institute | |
Veterans Affairs Department | 38 CFR 17.74(h)(1) | NFPA 25 | 2008 | Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(44) | SAE J-1133 | 1984 | School Bus Stop Arm | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (42) | APHA Method 6630 C | 2000 | Organochlorine Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN E | 1998 | Cyanide by Colorimetric Determination | American Public Health Association | |
Mine Safety and Health Administration | 30 CFR 70.1900(c) | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
Environmental Protection Agency | 40 CFR 272.151(b) | AZHWMP | 1995 | Arizona Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Arizona | |
Nuclear Regulatory Commission | 10 CFR 50.55a(c)(1) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section III | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97 Table E-2 Note | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (47) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 16 | Quanti-Tray®/2000 Method | 2002 | Quanti-Tray®/2000 Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435.45 Note 2 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(10) | ASTM D 2163 | 2007 | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography | ASTM International | |
Coast Guard | 36 CFR 1237.18(b) | ISO 18923 | 2000 | Imaging Materials--Polyester-Base Magnetic Tape--Storage Practices | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 147.650(a)(9) | IDUIC regulations | 1980 | Administrative Procedure, Title 67, Chapter 52, Idaho Code, sections 67-5201 through 67-5218 (Bobbs-Merrill 1980 and Supp. 1984) | State of Idaho | |
Environmental Protection Agency | 40 CFR 63.10005(i)(4)(iii) | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(iv) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.300-9(a) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-42A | 1975 | Airport Light Bases, Transformer Housings, and Junction Boxes, FAA Specification L-857 | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 21 CFR 139.117(a)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(10)(iii) | EPA-600-4-91-010 | 1991 | Method 200.7--Determination of Metals and Trace Elements in Water and Wastes by Inductively-Coupled Plasma-Atomic Emission Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(k)(14) | MSS SP-73 | 1996 | Brazing Joints for Copper and Copper Pressure Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 40 CFR 60.485(e)(1) | ASTM D 2879 | 1997 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(d)(1) | NFPA 30 | 1977 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(viii) | IEC 61260 | 1995 | Electroacoustics-Octave-Band and Fractional-Octave-Band Filters, edition 1.0 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 39.5001(c) | OCIMF Publication | 2006 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 42 | EPA Method 1664 | 1999 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, Revision A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(b)(1)(vi) | AFPC Book of Methods | 1991 | Section XI, Methods of Analysis for Phosphoric Acid, Superphosphate, Triple Superphosphate, and Ammonium Phosphates, No. 3 Total Phosphorus—P2O5, Method B—Gravimetric Quimociac Method | Association of Florida Phosphate Chemists | |
National Archives and Records Administration | 36 CFR 1238.5(c)(7) | AIIM MS43 | 1998 | Standard Recommended Practice--Operational Procedures--Inspection and Quality Control of Duplicate Microforms of Documents and From COM | Association for Information and Image Management | |
Research and Special Programs Administration | 49 CFR 195.452(h)(4)(i) | ASME B31.4 | 2002 | Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 430.3(o)(2) | DOE Publication | 2001 | ENERGY STAR Program Requirements for [Compact Fluorescent Lamps] CFLs | U.S. Department of Energy | |
Energy Department | 10 CFR 430 Subpart B, App. T, 2a | ASME A112.19.6 | 1995 | Hydraulic Requirements for Water Closets and Urinals | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.135-15(e)(1)(vii) | MilSpec A-A-55308 | 1997 | Commercial Item Description, Cloth And Strip, Laminated Or Coated, Vinyl Nylon Or Polyester, High Strength, Flexible | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 1043.20 Major conversion | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1910.252(b)(2)(ii)(I) | ANSI Z87.1 | 2003 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) Table (Total Coliform) | APHA Method 9221 A | 1999 | Multiple-Tube Fermentation Technique for Members of the Coliform Group | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.3.2 | ASTM D 1890 | 1981 | Standard Test Method for Beta Particle Radioactivity of Water | ASTM International | |
Mine Safety and Health Administration | 30 CFR 7.304(g)(2)(ii) | AWS D14.4 | 1977 | Classification and Application of Welded Joints for Machinery and Equipment | American Welding Society | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 209 | 1993 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | ASTM D 3867B | 1990 | Standard Test Methods for Nitrite-Nitrate in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(78) | ASTM D 1946 | 2006 | Standard Test Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 600.311-12(c)(2)(ii) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(vi) | ASTM A 395 | 1968 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (31) | EPA Method 351.1 | 1978 | Total Kjeldahl Nitrogen - Automated Phenate | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(c)(8) | ASTM D 445 | 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-1040 | 1988 | Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines | Society of Automotive Engineers |