This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort ascending |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.552(c)(16) | ANSI A10.4 | 1963 | Safety Requirements for Workmen's Hoists | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(1)(ii) | ANSI Z41 | 1999 | Protective Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1917.119(c) | ANSI A14.2 | 1990 | Safety Requirements for Portable Metal Ladders | American National Standards Institute | |
Agriculture Department | 84 FR 28186 | 7 CFR 1728 | ANSI O5.2–2012 | 2012 | Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service Electric and Telecommunications Borrowers | American National Standards Institute |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(65) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(7) | ANSI A14.1a | 1977 | Safety Code for Portable Wood Ladders | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.4.1 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Energy Department | 87 FR 55090 | 10 CFR 430 | ANSI/NEMA WD 6–2016 | 2016 | Energy Conservation Program: Test Procedure for Battery Chargers | American National Standards Institute |
Housing and Urban Development Department | 24 CFR 200.937(a)(1) | ANSI Z124.3 | 1980 | Plastic Lavatories | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.57(g)(5)(i)(A) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 214.117(b) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Energy Department | 10 CFR 430.3(c)(16) | ANSI C82.13 | 2002 | American National Standard for Lamp Ballasts—Definitions for Fluorescent Lamps and Ballasts, | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(1) Note (3) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(13)(ii)(B)(1) | ANSI H23.1 | 1970 | Standard Specification for Seamless Copper Water Tube | American National Standards Institute | |
Energy Department | 88 FR 21061 | 10 CFR 430 | ANSI/IES LM-75-19 | 2019 | Energy Conservation Program: Test Procedure for Ceiling Fan Light Kits | American National Standards Institute |
Occupational Safety and Health Administration | 29 CFR 1910.261(f)(4) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
National Archives and Records Administration | 74 FR 51014 | 36 CFR 1235.46(b)(2) | ANSI X3.180 | 1990 | American National Standard: Magnetic Tape and Cartridge for Information Interchange—18-Track, Parallel, 1⁄2 inch (12.65 mm), 37871 cpi (1491 cpmm), Group-Coded—Requirements for Recording | American National Standards Institute |
Occupational Safety and Health Administration | 29 CFR 1910.67(b)(1) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(8) | ANSI Z88.2 | 1992 | Respiratory Protection | American National Standards Institute | |
Consumer Product Safety Commission | 16 CFR 1211.6 (c) | ANSI/DASMA 102 | 2011 | Specifications for Sectional Doors | American National Standards Institute | |
Energy Department | 85 FR 56475 | 10 CFR 429 and 430 | ANSI C82.2–2002 (R2007, R2016) | 2002 | Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts | American National Standards Institute |
Energy Department | 10 CFR 430.2, Definitions, Cold temperature flouresent lamp | ANSI/IEC C78.81 | 2005 | American National Standard for Electric Lamps—Double-Capped Fluorescent Lamps—Dimensional and Electrical Characteristics | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 71.602(a) | ANSI A40.8 | 1955 | National Plumbing Code | American National Standards Institute | |
Energy Department | 10 CFR 430 Subpart B, App. O, 3.1.2 | ANSI Z11.182 | 1965 | Standard Method of Test for Smoke Density in the Flue Gases from Distillate Fuels | American National Standards Institute | |
Coast Guard | 46 CFR 175.600(b) Table | ANSI Z26.1 | 1977 | Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.5.1/CSA 7.1-M | 1999 | Gas Clothes Dryers Vol. 1 Type 1 Clothes Dryers with Addendum Z21.5.1A | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.265(c)(30)(iv) | ANSI B56.1 | 1969 | Safety Code for Powered Industrial Trucks | American National Standards Institute | |
Energy Department | 87 FR 53618 | 10 CFR 430 | ANSI C78.375A–2014 (R2020) | 2014 | Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, Incandescent Reflector Lamps, and General Service Incandescent Lamps | American National Standards Institute |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(5) Note (1) | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Engineers Corps | 33 CFR 222.3(c)(2) | ANSI C2 | 2012 | National Electrical Safety Code | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (c)(6) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Coast Guard | 46 CFR 183.540 | ANSI A17.1 | 1984 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(8) | ANSI A17.1c | 1969 | Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(ff)(1) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power-Transmission Apparatus | American National Standards Institute | |
National Archives and Records Administration | 36 CFR 1235.46(b)(1) | ANSI X3.54 | 1986 | Recorded Magnetic Tape for Information Interchange (6250 CPI, Group Coded Recording) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.200(c)(3) | ANSI Z535.1 | 2011 | Safety Colors | American National Standards Institute | |
Labor Department | 86 FR 54611 | 29 CFR 1915 | ANSI Z87.1–2003 | 2003 | Incorporation by Reference; Notice of Corrections | American National Standards Institute |
Environmental Protection Agency | 85 FR 42074 | 40 CFR 63 | ANSI/ASME PTC 19.10–1981 | 1981 | National Emission Standards for Hazardous Air Pollutants: Integrated Iron and Steel Manufacturing Facilities Residual Risk and Technology Review | American National Standards Institute |
Occupational Safety and Health Administration | 29 CFR 1910.104(b)(5)(ii) | ANSI B31.1 | 1967 | Code for Pressure Piping | American National Standards Institute | |
Federal Railroad Administration | 49 CFR 227.103(h)(2) | ANSI S1.43 | 2002 | Specifications for Integrating-Averaging Sound Level Meters | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.705(l)(3) | ANSI Z21.15 | 1997 | Manually Operated Gas Valves for Appliances, Appliances Connector Valves, and Hose End Valves | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(A)(22) | ANSI Z88.5 | 2014 | Practice for Respiratory Protection for the Fire Service | American National Standards Institute | |
Coast Guard | 33 CFR 140.7(b) | ANSI Z41 | 1983 | Protective Footwear | American National Standards Institute | |
Federal Communications Commission | 47 CFR 2.948(b)(8) | ANSI C63.4 | 2001 | Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.219(c)(5)(iii) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(9) | ANSI A14.3 | 1956 | Safety Code for Fixed Ladders | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b)(1)(iii)(B) | ANSI Addenda B31.1 | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI B31.2 | 1968 | Fuel Gas Piping | American National Standards Institute | |
Energy Department | 10 CFR 430.2, Definitions, Rated wattage (1)(i) | ANSI C78.81 | 2005 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(4)(i) | ANSI Z33.1 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | American National Standards Institute |