This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (40) | ASTM D 3086 | 1990 | Test Method for Organochlorine Pesticides in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 435 Appendix 5, Subpart A | EPA Method 1655 | 2015 | Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Recommended Service Procedure, Section 1 | SAE J-1990 | 1990 | Extraction and Recycle Equipment for Mobile Automotive Air-Conditioning Systems | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1211.2(c) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1728.202(a) | RUS Bulletin 1728F-700 | 1993 | RUS Specification for Wood Poles, Stubs and Anchor Logs | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.1 | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Nuclear Regulatory Commission | 10 CFR 50.55a(f)(2) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 120 | 2009 | Standard Specification for Rubber Insulating Gloves | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (42) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(20)(iv) | IDEXX Test Methods | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 147.550(a)(4) | GAUIC regulations | 1988 | Georgia Administrative Procedure Act, O.C.G.A. §§ 50-13-1 through 50-13-22 (Reprinted from the O.C.G.A. and 1988 Cumm. Supp.) | State of Georgia | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 1, (1)(b) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I) | Annual Book of Standards | 1996 | Annual Book of ASTM Standards | ASTM International | |
Rural Utilities Service | 7 CFR 1728.97(e)(9) | AWPA M3 | 2005 | Standard Quality Control Procedures for Wood Preserving Plants | American Wood Protection Association | |
Energy Department | 10 CFR 431.66(d)(2)(iii) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | HCC Method 8009 | 1979 | Zincon Method for Zinc, Hatch Handbook of Water Analysis | Hach Chemical Company | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 80.580(e)(1)(iv) | ASTM D 6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC E-9 | 1990 | Direct Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 28.335(g)(2) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure, and Commercial Motorcraft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (40) | APHA Method 4500-NO3 F | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (total chromium) | ASTM D 5673 | 2010 | Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 60.485a(g)(5) | ASTM D 2504 | 1993 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.5(a) | Drawing No. SA 150 M071 | 1970 | Left arm assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 21 CFR 177.1590(c) | ASTM D 968 | 1981 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Falling Abrasive Tester | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. R, 3.1 | IES LM-9 | 1999 | Electrical and Photometric Measurements of Fluorescent Lamps | Illuminating Engineering Society of North America | |
Coast Guard | 46 CFR 160.135-7(b)(27) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1042.910(a)(1)(i) | IMO Publication | 2008 | Revised MARPOL Annex VI, Regulations for the Prevention of Pollution from Ships (2008 Annex VI) | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (18) Nitrate | ASTM D 3867B | 1990 | Standard Test Methods for Nitrite-Nitrate in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(f)(6) | ASME MFC-7M | 2006 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
Federal Trade Commission | 16 CFR 306.0(b) | ASTM D 2699 | 1992 | Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 24 | 2013 | Outside Protection | National Fire Protection Association | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 30.1(a) | BATF Publication 5110.6 | 1978 | Gauging Manual Embracing Instructions and Tables for Determining Quantity of Distilled Spirits by Proof and Weight | Bureau of Alcohol, Tobacco, Firearms and Explosives, U.S. Department of the Treasury | |
National Archives and Records Administration | 36 CFR 1234.3(c)(3) | NFPA 42 | 1997 | Standard for the Storage of Pyroxylin Plastic | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(2) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 56.01-2(d)(14) | ASME B16.21 | 2005 | Nonmetallic Flat Gaskets for Pipe Flanges | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-995b | 2013 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1.3 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.19.1M | 1987 | Enameled Cast Iron Plumbing Fixtures | American Society of Mechanical Engineers | |
Minerals Management Service | 30 CFR 250.803(c)(2) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.7, b | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 177.300(b)(1) | Lloyd's Publication | 1998 | Rules and Regulations for the Classification of Yachts and Small Craft | Lloyd's Register of Shipping | |
Environmental Protection Agency | 40 CFR 75.6(a)(49) | ASTM D 5453 | 2006 | (DUP) Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine, Fuel, and Engine Oil by Ultraviolet Fluorescence | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(i) | ANSI A14.1 | 1975 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | NFPA 70 | 1996 | National Electrical Code (NEC) Section 310-15 | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.36(d) | Drawing No. 78051-218 | 1987 | Hybrid III Anthropomorphic Test Dummy, Revision T | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (69) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table Note (16) | 40 CFR 136, Appendix D | 2014 | Precision and Recovery Statements for Methods for Measuring Metals | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.354(d)(3) | ASME MFC-16 | 2007 | Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 131.160(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International |