DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 33 CFR 157.02(b)(6) | IMO Resolution A.601(15) | 1987 | Provision and Display of Manoeuvring Information on Board Ships, Annex sections 1.1, 2.3, 3.1, and 3.2 with appendices | International Maritime Organization | |
Coast Guard | 33 CFR 140.7(b) | ANSI Z89.1 | 1981 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(iii) | ASTM D 638 | 2008 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Coast Guard | 46 CFR 160.055-1(b) | Drawing No. 160.055-1A, Sheet 1 | 0 | Life Preservers, Unicellular Plastic Foam, Adult, Construction and Arrangement, Vinyl Dip Coated, Model 62, Adult | U.S. Coast Guard | |
Coast Guard | 46 CFR 56.01-2(d)(4) | ASME B16.1 | 1998 | Cast Iron Pipe Flanges and Flanged Fittings, Classes 25, 125, 250 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 179.212(d) | IMO Resolution MSC.216(82) | 2006 | Adoption of Amendments to the International Convention for the Safety of Life At Sea, 1974, As Amended | International Maritime Organization | |
Coast Guard | 46 CFR 56.20-1(c)(2)(ii) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for the Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 120.410(d) | UL 1570 | 1995 | Fluorescent Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 164.018-5(a)(9) | MIL-C-43006E | 1978 | Cloth and Strip Laminated, Vinyl Nylon High Strength, Flexible | U.S. Department of Defense | |
Coast Guard | 46 CFR 111.105-15(b) | IEC 79-6 | 1995 | Electrical Apparatus for Explosive Gas Atmospheres | International Electrotechnical Commission | |
Coast Guard | 46 CFR 111.12-7(b) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
Coast Guard | 46 CFR 119.440(a)(2)(i) | ASTM D 2863 | 1995 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index) | ASTM International | |
Coast Guard | 46 CFR 52.01-135(b) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASME B16.11 | 2001 | Forged Fittings, Socket-Welding and Threaded | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 154, Appendix B, 3.2 | ANSI B16.5 | 1979 | Pipe Flanges and Flanged Fittings | American National Standards Institute | |
Coast Guard | 21 CFR 131.110(d) | AOAC Official Methods | 1969 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B1.20.3 | 1982 | Dryseal Pipe Threads (Inch) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.60-5(a)(2) | IEC 60092-352 | 1997 | Electrical Installation in Ships—Choice and Installation of Cables for Low-Voltage Power Systems, Second Edition | International Electrotechnical Commission | |
Coast Guard | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 76.10-10(n)(2) | UL 19 | 2001 | Standard for Safety, Lined Fire Hose and Hose Assemblies | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 28.380(b) | ABYC P-1 | 1986 | Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 46 CFR 108.645(a)(4) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 46 CFR 151.15-3(g)(2)(iii) | ASTM D 4986 | 1998 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials | ASTM International | |
Coast Guard | 40 CFR 60.261(s) Silvery iron | ASTM A 100 | 1993 | Standard Specification for Ferrosilicon | ASTM International | |
Coast Guard | 46 CFR 58.01-50(a) | IMO Publication A.468(XII) | 1981 | Code on Noise Levels on Board Ships | International Maritime Organization | |
Coast Guard | 33 CFR 142.42(b) | ANSI A10.14 | 1975 | Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines | American National Standards Institute | |
Coast Guard | 46 CFR 160.151-27(c)(1) | IMO Resolution A.689(17) | 1996 | Recommendation on Testing Life-Saving Appliances including amendments through Resolution MSC.54(66) | International Maritime Organization | |
Coast Guard | 40 CFR 444.12(b)(1) Table (5) | USGS I-1586-85 | 1985 | pH, Electrometric | U.S. Geological Survey | |
Coast Guard | 46 CFR 110.10-1(g)(31) | IEC 61363-1 | 1998 | Electrical Installations of Ships and Mobile and Fixed Offshore Units—Part 1: Procedures for Calculating Short-Circuit Currents in Three-Phase a.c., First Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 125.180(b) | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways including 1980 supplement | American National Standards Institute | |
Coast Guard | 46 CFR 161.010-1(b) | UL 1196 | 1987 | Standard for Floating Waterlights | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.60-13(c) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 21 CFR 177.1345(b)(1) | ASTM D 1505 | 1990 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Coast Guard | 46 CFR 35.01-3(b) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 114.600(b) | UL 1570 | 1995 | Fluorescent Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 148.8(c)(1) | UN Manual of Tests and Criteria | 2009 | Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, Fifth revised edition | United Nations | |
Coast Guard | 46 CFR 56.20-5 | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 24 CFR 3280.803(k)(1) | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 40 CFR 60.106(e)(2) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 159.125 | ASTM E 11 | 1995 | Standard Specification for Wire Cloth and Sieves for Testing Purposes | ASTM International | |
Coast Guard | 46 CFR 160.005-1(b) | Drawing No. 160.005-1 (Sheet 5) | 0 | Pad Detail (Child) | U.S. Coast Guard | |
Coast Guard | 46 CFR 34.01-15(c)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Coast Guard | 46 CFR 160.047-3a(b)(1)(i) | Federal Standard 151 | 0 | Metals, Test Methods | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM A 276 | 1998 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Coast Guard | 46 CFR 54.20-3(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 170.015(b)(2) | ASTM F 1197 | 2000 | Standard Specification for Sliding Watertight Door Control Systems | ASTM International | |
Coast Guard | 46 CFR 160.055-3(c) | Federal Standard 191 | 0 | Textile Test Method 5610 | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 39.2009(a)(1)(iii)(A) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 169.115(c)(4) | FedSpec ZZ-H-451F | 0 | Hose, Fire, Woven-Jacketed Rubber or Cambric-Lined, with Couplings | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.70-20(a) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers |