Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Rural Utilities Service | 7 CFR 1755.405(g)(3) | IEEE 743 | 1984 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
| Rural Utilities Service | 7 CFR 1755.860(h)(2) | ASTM D 4568 | 1986 | Standard Test Method for Evaluating Compatibility between Cable Filling and Flooding Compounds and Polyolefin Cable Materials | ASTM International | |
| Rural Utilities Service | 7 CFR 1755.703(c)(6)(ii) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
| Rural Utilities Service | 7 CFR 1755.870(f)(7) | ASTM B 736 | 1992 | Standard Specification for Aluminum, Aluminum-Alloy and Aluminum-Clad Steel Cable Shielding Stock | ASTM International | |
| Rural Utilities Service | 7 CFR 1755.890(i)(8) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
| Rural Utilities Service | 7 CFR 1755.910(b)(4) | OSHA Standards | 0 | OSHA Standards | Occupational Safety and Health Administration, U.S. Department of Labor | |
| Rural Utilities Service | 7 CFR 1755.902(a)(2) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable | Insulated Cable Engineers Association | |
| Rural Utilities Service | 7 CFR 1755.910(e)(3)(vi) | ASTM D 1654 | 1992 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments | ASTM International | |
| Rural Utilities Service | 7 CFR 1728.201(h)(2)(ii)(A) | AWPA A2 | 2008 | Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations | American Wood Protection Association | |
| Rural Utilities Service | 7 CFR 1755.200(a)(3) | IEEE NESC | 1993 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(53) | API MPMS | Chapter 20—Section 1—Allocation Measurement, | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(k)(3) | COS Safety Publication COS-2-04 | Requirements for Accreditation of Audit Service Providers Performing SEMS Audits and Certification of Deepwater Operations | Center for Offshore Safety | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.862(a)(3) | API RP 505 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | ||
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(5) | API Bulletin 2INT-MET | 2007 | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(54) | API RP 2T | 1997 | Planning, Designing and Constructing Tension Leg Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(26) | API MPMS | 2005 | Chapter 8, Section 2 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(5) | API Bulletin 2INT-MET | Interim Guidance on Hurricane Conditions in the Gulf of Mexico | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(69) | API RP 14F | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Upstream Segment | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(10) | API RP 2RD | Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) | American Petroleum Institute | ||
| Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(b) | API Spec 6A | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(1) | API Standard 53 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(7) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.442(c) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(10) | API MPMS | 2005 | Chapter 4, Section 1 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(21) | API MPMS | Chapter 5—Metering | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(85) | ANSI/API Spec. 6D | Specification for Pipeline Valves | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.828 (c) | ANSI/API RP 14B | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(55) | ISO 10417: 2004 | 2004 | Petroleum and natural gas industries—Subsurface safety valve systems—Design, installation, operation and redress | International Organization for Standardization | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(6) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.1904(a) | COS Safety Publication COS-2-04 | 2012 | Requirements for Accreditation of Audit Service Providers Performing SEMS Audits and Certification of Deepwater Operations, First Edition | Center for Offshore Safety | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(15) | ASTM C 33 | 2007 | Standard Specification for Concrete Aggregates | ASTM International | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(37) | API MPMS | Chapter 10—Sediment and Water, Section 4—Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure) | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(f)(4) | 2017 ASME Boiler and Pressure Vessel Code | Section VIII, Rules for Construction of Pressure Vessels; Division 2: Alternative Rules | American Society of Mechanical Engineers | |
| Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(c)(3) | API RP 14J | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(l)(1) | AGA Report No. 7 | 2006 | Measurement of Natural Gas by Turbine Meters | American Gas Association | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(20) | API RP 2SK | 2005 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.920(e) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(6) | ASME SPPE-1 | 1994 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(k)(1) | NACE MR-0175 | 2003 | Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment | National Association of Corrosion Engineers | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(54) | API MPMS | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 1—Electronic Gas Measurement | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.292 (j) | API RP 14C | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms, Flow schematics and Safety Analysis Function Evaluation (SAFE) charts | American Petroleum Institute | ||
| Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 14C | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | ||
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(13) | API RP 2T | 1997 | Planning, Designing and Constructing Tension Leg Platforms | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(27) | API MPMS | 2005 | Chapter 9, Section 1 | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(6) | API Bulletin 92L | Drilling Ahead Safely with Lost Circulation in the Gulf of Mexico | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(70) | API RP 14FZ | Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(11) | API RP 2SK | Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | ||
| Safety and Environmental Enforcement Bureau | 84 FR 24707 | 30 CFR 250.873(b) | API Spec 6AV1 | Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (a)(2)(i) | ANSI/API Spec. 6A | Specification for Wellhead and Christmas Tree Equipment | American Petroleum Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(8) | API RP 2FPS | 2001 | Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute |