DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 21 CFR 177.1050(e)(4) | FDA Publication | 0 | Gas-Solid Chromatographic Procedure for Determining Acrylonitrile Monomer in Acrylonitrile-Containing Polymers and Food Simulating Solvents | Food and Drug Administration, U.S. Department of Health and Human Services | |
Research and Special Programs Administration | 46 CFR 111.60-11(c) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Research and Special Programs Administration | 21 CFR 178.3620(d)(3) V.B.19.b | ASTM E 169 | 1981 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Research and Special Programs Administration | 18 CFR 38.2(a)(12) | NAESB Publication | 2009 | Business Practices for Measurement and Verification of Wholesale Electricity Demand Response | North American Energy Standards Board Wholesale Electric Quadrant | |
Research and Special Programs Administration | 49 CFR 178.337-2(b)(2)(i) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.55(k)(3)(i) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Research and Special Programs Administration | 21 CFR 177.1500(d)(5)(ii) | ISO 307 | 1984 | Plastics--Polyamides--Determination of Viscosity Number | International Organization for Standardization | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (27) | APHA Method 2340 C | 1998 | Hardness by EDTA Titration | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 192.165(b)(3) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 2 | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 21 CFR 165.110(b)(4)(iii)(I) | APHA Standard Methods | 1995 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Research and Special Programs Administration | 49 CFR 193.2059 | NFPA 59A | 2001 | Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB Footnote 52 | EPA Method 300.1 | 1997 | Methods for the Determination of Inorganic Substances in Environmental Samples, EPA/600/R-93/100, Revision 1.0, including errata cover sheet April 27, 1999, Determination of Inorganic Ions in Drinking Water by Ion Chromatography | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 172.102(c)(1) 164 | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Research and Special Programs Administration | 49 CFR 173.306(e)(1)(i) | ASHRAE 15 | 1994 | Safety Code for Mechanical Refrigeration | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CAN/CGSB 43.147 | 2005 | Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for the Handling, Offering for Transport, or Transportation of Dangerous Goods by Rail | Canadian General Standards Board | |
Research and Special Programs Administration | 49 CFR 174.63(c)(3) | AAR Specification M-943 | 1988 | Container Chassis For TOFC Service | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 178.345-4(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 178.601(g)(8) | ASTM A 366/A 366M | 1991 | Standard Specification for Steel: Sheet, Carbon, Cold-Rolled, Commercial Quality | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.200-22(d) | AAR Publication | 2000 | Specification for Tank Cars, Appendix W | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) B2 | API RP 5L1 | 2002 | Recommended Practice for Railroad Transportation of Line Pipe | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 192.283(a)(3) | ASTM D 638 | 2003 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Research and Special Programs Administration | 49 CFR 195.116(d) | API 6D | 2002 | Specification for Pipeline Valves | American Petroleum Institute | |
Research and Special Programs Administration | 21 CFR 172.615(a) | ASTM D 2008 | 1980 | Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 173.316(a)(4) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 3574 | 1986 | Cold-Reduced Carbon Steel Sheet of Commercial and Drawing Qualities | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (23) | LI QuikChem Method 10-204-00-1-X | 2005 | Digestion and Distillation of Total Cyanide in Drinking and Wastewaters using MICRO DIST and Determination of Cyanide by Flow Injection Analysis, Revision 2.2 | Lachat Instruments | |
Research and Special Programs Administration | 18 CFR 38.2(a)(4) | NAESB Publication | 2009 | Coordinate Interchange with minor corrections | North American Energy Standards Board Wholesale Electric Quadrant | |
Research and Special Programs Administration | 49 CFR 178.356-2(e) | AWS B3.0 | 1972 | Standard Qualification Procedure | American Welding Society | |
Research and Special Programs Administration | 49 CFR 179.100-7(a) | ASTM A 537/A 537M | 1991 | Standard for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.220-7(c) | ASTM B 209 | 1993 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Research and Special Programs Administration | 49 CFR 192.7(c)(2) E1 | MSS SP-44 | 2001 | Steel Pipe Line Flanges | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Research and Special Programs Administration | 42 CFR 416.44(b)(1) | NFPA 101 | 2000 | Life Safety Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 195.264(b)(1) | API 620 | 2002 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 193.2301 | NFPA 59A | 2001 | Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Research and Special Programs Administration | 46 CFR 108.101(b) | ASTM F 1014 | 1992 | Standard Specification for Flashlights on Vessels | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-11 | 2001 | Recommended Practice for Inspection of Compressed Gas Cylinders at Time of Manufacture | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 173.301(f)(1) | CGA C-14 | 1979 | Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 172.519(d)(2)(i) | ASTM G 26 | 1970 | Standard Recommended Practice for Light- and Water-Exposure Apparatus (Xenon-Arc Type) for Exposure of Non-metallic Materials | ASTM International | |
Research and Special Programs Administration | 40 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 178.45(j)(3)(i) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(2) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.220-26(a) | AAR Specification M-1002 | 1996 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 192.11(a) | NFPA 58 | 2004 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Research and Special Programs Administration | 21 CFR 164.150(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192.933(a)(1) | ASME B31G | 2004 | Manual for Determining the Remaining Strength of Corroded Pipelines | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 45 CFR 162.920(a)(14) | ASC X12 | 2006 | Standards for Electronic Data Interchange Technical Report Type 3—Benefit Enrollment and Maintenance (834) | Washington Publishing Company | |
Research and Special Programs Administration | 46 CFR 111.60-19(b) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations on Shipboard | Institute of Electrical and Electronics Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 370 | 1994 | Standard Test Method and Definitions for Mechanical Testing of Steel Products | ASTM International |