This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(viii) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 40 | 2001 | Storage and Handling of Cellulose Nitrate Film | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(16) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.107(l)(3) | NFPA 86A | 1969 | Standard for Oven and Furnaces Design, Location and Equipment | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(2)(v) | NFPA 54 | 1969 | Standard for the Installation of Gas Appliances and Gas Piping | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 20 | 2003 | Installation of Stationary Pumps for Fire Protection | U.S. Department of Housing and Urban Development | |
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ASAE S276.2 | 1971 | Emblem for Identifying Slow Moving Vehicles | American Society of Agricultural Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(4)(iii) | IME Pamphlet No. 17 | 1960 | Safety in the Handling and Use of Explosives | Institute of Makers of Explosives | |
Occupational Safety and Health Administration | 29 CFR 1910.268(g)(2)(i)(A) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.1b | 1968 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1917.94(b)(1)(ii) | ANSI/NSC Z41 | 1999 | Protective Footwear | National Safety Council | |
Occupational Safety and Health Administration | 29 CFR 1917.93(b)(1)(iii) | ANSI/ISEA Z89.1 | 2009 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
Occupational Safety and Health Administration | 29 CFR 1926.453(a)(2) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(l)(3) | ASME B30.7 | 2001 | Base-Mounted Drum Hoists | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(1)(i) | SAE J-1063 | 1993 | Cantilevered Boom Crane Structures--Method of Test | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix D Table | NFPA 1971 | 1975 | Protective Clothing for Structural Fire Fighting | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-397 | 1973 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(6) | NFPA 35 | 1970 | Standard for the Manufacture of Organic Coatings | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(1) | UL 58 | 1961 | Steel Underground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | ANSI K61.1 | 1972 | Standard for the Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.156 (8)(2) | DHEW Publication 76-189 | 2014 | Guide to Industrial Respiratory Protection | National Institute for Occupational Safety and Health | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-185 | 1988 | Recommended Practice for Access Systems for Off-Road Machines | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.103(b)(1)(ii)(A) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(32) | ANSI B175.1 | 1991 | Safety Requirements for Gasoline-Powered Chain Saws | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(51) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1950 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.160 | ANSI/NFPA 15 | 2014 | Water Spray Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(iii) | ANSI B31.5 | 1966 | Refrigeration Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.180(b)(2) | ANSI B30.5 | 1968 | Safety Code for Crawler, Locomotive and Truck Cranes | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(D)(7) | ANSI/NFPA 231C | 2014 | Standard for Rack Storage of Materials | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(1)(i) | ANSI Z12.12 | 1968 | Standard for the Prevention of Sulfur Fires and Explosions | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(61) | ANSI Z41 | 1991 | Personal Protection-Protective Footwear | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.67(c)(5)(ii) | AWS D8.4 | 1961 | Recommended Safe Practices for Automotive Welding Design | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1926.602(b)(3) | PCSA 3 | 1969 | Mobile Hydraulic Excavator Standards | Power Crane and Shovel Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(7) | ASTM B 88 | 1969 | Seamless Copper Water Tube | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.153(b)(2) | ANSI Z87.1 | 1998 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-395 | 1974 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.104(a)(4)(ii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VII—Unfired Pressure Vessels | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1917.44(n)(5)(i) | NHTSA Publication | 2014 | Multi-Piece Rim Wheel Matching Chart | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(aa)(2) | PCSA 2 | 1968 | Mobile Hydraulic Crane Standards | Power Crane and Shovel Association | |
Occupational Safety and Health Administration | 29 CFR 1926.1438(b)(2)(iii) | ASME B30.2 | 2005 | Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(1) | UL 142 | 1968 | Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix C (II)(B)(3) | CGA C-2 | 2014 | Recommendations for the Disposition of Unserviceable Compressed Gas Cylinders | Compressed Gas Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(19) | NFPA 80 | 1970 | Standard for the Installation of Fire Doors and Windows | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1918.3(b)(10) | ANSI/ISEA Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(b)(2) | ACGIH Publication | 1986 | Threshold Limit Values and Biological Exposure Indices for 1986-1987 | American Conference of Governmental Industrial Hygienists | |
Occupational Safety and Health Administration | 29 CFR 1910.262(h)(1)(i) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 10 CFR 430.2, Definitions, BP incandescent reflector lamp (2) | ANSI C78.21 | 1989 | Electric Lamps--PAR and R Shapes | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(d)(1) | AAI-RMA Specification | 2013 | Specifications for Anhydrous Ammonia Hose | Agriculture Ammonia Institute-Rubber Manufacturers Association |